SUperTex 50 cal first Chrono Test numbers for the production version 1020 FT/LB

[jkingsouthafrica]

First test with the production version of the Super Tex 50 cal upgrade from AAO and Lethal Air   using HPA    filmed indoors using LED Infrared Diffusors to get an accurate reading
Shooting 633 grain Spitzer

[jackssmirkingrevenge]

Those are some impressive numbers, .44 Magnum territory...

[MJP]

Would be interesting to see some numbers with slugs that pass the 900fps mark and not just the highest possible fpe.
But anyway not bad numbers at all.

Marko

[jkingsouthafrica]

Would be interesting to see some numbers with slugs that pass the 900fps mark and not just the highest possible fpe.
But anyway not bad numbers at all.

Marko

304 grain hunting pellets    over the 1000 + fps   mark    will put a video up in the very near future

[boonez40]

Ok my question is this, are you running this gun on HPA only or are you mixing Helium. It would seem that the 457 should be capable of these numbers. What is the difference in the set up of the 50 over the 457.

[jkingsouthafrica]

Ok my question is this, are you running this gun on HPA only or are you mixing Helium. It would seem that the 457 should be capable of these numbers. What is the difference in the set up of the 50 over the 457.

This is defiantly   HPA if I were to add Helium to this set up you would increase  the current  numbers by about    50%   and push the foot pounds  well over 2000 foot pounds
There are a number of differences  between the 50 cal and 457  and those differences have increased the out put

[MJP]

Now let's not exaggerate the numbers, there is no way you're getting 2000fpe from 1000 by adding 50%
Basic math Jeremy, more like around 1500fpe on helium would be about right.

Marko

[dyotat100]

Exactly.  Always trying to use numbers instead of actual real world results.

If your lucky you will see a 50% increase in power. Not fps.

I notice you don't show gun or mention how long the barrel is either.

[darkcharisma]

I just love it when guesstimates go overboard and immediately someone corrects it. There ain't no way you can get your hands on helium right now without getting burn to the wallet. Let's not go there yet...or go there and give us Chrono numbers.

[jkingsouthafrica]

Now let's not exaggerate the numbers, there is no way you're getting 2000fpe from 1000 by adding 50%
Basic math Jeremy, more like around 1500fpe on helium would be about right.

Marko

true but we don't know what we would get without actually running it on Helium

[jkingsouthafrica]

Exactly.  Always trying to use numbers instead of actual real world results.

If your lucky you will see a 50% increase in power. Not fps.

I notice you don't show gun or mention how long the barrel is either.

the reason for not showing the Barrel is that it has our new Prototype Suppressor on the end of it and  we not willing at this point to share those images       36 inch barrel   2 inches longer than a factory Texan barrel

[boonez40]

Exactly.  Always trying to use numbers instead of actual real world results.

If your lucky you will see a 50% increase in power. Not fps.

I notice you don't show gun or mention how long the barrel is either.

the reason for not showing the Barrel is that it has our new Prototype Suppressor on the end of it and  we not willing at this point to share those images       36 inch barrel   2 inches longer than a factory Texan barrel

Is the suppressor made of clear plastic and the internals are easily seen ? Did you copy someone else's design and do not wish to get into a war with that person ? Are the blue prints printed on the suppressor and and a screenshot, enlargement of pic will reviel your top secret device ?
I am not getting this at all, but you run your game they way you run it. Things apparently run differently in your neck of the woods.

[uncle paulie]

Watching....

pv

[jkingsouthafrica]

Exactly.  Always trying to use numbers instead of actual real world results.

If your lucky you will see a 50% increase in power. Not fps.

I notice you don't show gun or mention how long the barrel is either.

the reason for not showing the Barrel is that it has our new Prototype Suppressor on the end of it and  we not willing at this point to share those images       36 inch barrel   2 inches longer than a factory Texan barrel

 

Is the suppressor made of clear plastic and the internals are easily seen ? Did you copy someone else's design and do not wish to get into a war with that person ? Are the blue prints printed on the suppressor and and a screenshot, enlargement of pic will reviel your top secret device ?
I am not getting this at all, but you run your game they way you run it. Things apparently run differently in your neck of the woods.

  LOL LOL No its not made of clear plastic  . No its not a copy of some ones design   It has external designs aspects  that can be clearly seen    if you look up  The Airbeast Hybrid Silencer we make then you will see that it also has an external part    . This has a new design internal /external from the Original   and as I said before until it goes into production not showing video of it    Ive posted videos on the Old  internal design of the Airbeast here on GTA .    no things run about the same in my neck of the woods as in yours  we just like to protect a new design until we manufacture it  after that if someone copies it no big deal we move on . in this day and age things get copied so fast we normally have 3 follow up designs ready to go so that we always stay ahead of the game