Crosman Titan GP grinding during the cocking.

[dkwflight]

Hi
I was experiencing a grinding during cocking with my Titan.
It was lessening but I was concerned.
After dis assembly I found a sharp edge on the open end of the piston away from the slot. The sideways pressure of the cocking mechanism was pushing the cutting edge into the cylinder.
I rounded and softened the outside edge of the piston with some Emory cloth and the gouges inside the cylinder as well.
Some moly paste and the gun is cocking smoothly now.
I also put some moly on the gas spring cylinder where it was rubbing the inside of the piston.

[Mark 611]

That's a common problem with the NP manufacturing and where it's made!

[dkwflight]

Hi actually I was pleasantly surprised at the good quality inside these Chinese guns.