Author Topic: Honda Moly 60 Paste (Read 3311 times))

rsterne · « **on:** July 21, 2011, 01:24:07 PM »

Now available in 3 oz. tubes on eBay....

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=370452619247

Cost me $14.06 CAD including postage....

Bob

MichaelM · « **Reply #1 on:** July 21, 2011, 06:17:02 PM »

nice find

bodybag0 · « **Reply #2 on:** July 29, 2011, 02:44:01 AM »

What is this lube used for and why is it so good?

Put-In · « **Reply #3 on:** July 29, 2011, 04:33:56 AM »

Honda Moly 60 is used in automotive industry to reduce friction. Also is good to use in air rifle to reduce friction between piston and rifle tube, so it's main thing if you want to do rifle tuning.

rsterne · « **Reply #4 on:** July 29, 2011, 01:57:23 PM »

Basically any metal to metal contact except possibly trigger sears where it may prove too slippery.... It takes VERY little to do the job and you should "burnish" (ie rub) it into the metal for best results.... the Moly works its way into the pores in the metal providing a very slippery surface.... It is so slippery they do NOT reccommend it in ball or roller bearings as they may actually slide instead of roll....

Bob

bodybag0 · « **Reply #5 on:** July 30, 2011, 12:27:04 AM »

Thanks guys for the info. I guess I should buy some for future projects.

quazy · « **Reply #6 on:** July 31, 2011, 04:54:02 AM »

Thanks bought me a tube.

Thank you to our advertisers!

Honda Moly 60 Paste

Author Topic: Honda Moly 60 Paste (Read 3311 times))

rsterne

Honda Moly 60 Paste

MichaelM

Re: Honda Moly 60 Paste

bodybag0

Re: Honda Moly 60 Paste

Put-In

Re: Honda Moly 60 Paste

rsterne

Re: Honda Moly 60 Paste

bodybag0

Re: Honda Moly 60 Paste

quazy

Re: Honda Moly 60 Paste