Shooting with bullets .305-144 g (Accuratemolds)

[Tiroflojo]

Greetings.
http://www.accuratemolds.com/bullet_detail.php?bullet=30-140R-D.png
Yesterday I put the new heavy bullets to the test, after putting the viewfinder with them at 30m.
1º-I passed crony: considerable fall of the speed, from 309m of the bullet of 75 g, the one of 140g remains in 198m xsg, loss of energy to 178 joules. I see that the valve with air outlet to 6mm, is not the height to move this bullet well.But, surprisingly it does not behave badly in precision.He makes groups of 5 shots in 1 € a to 30/37 m.The second, third and fourth shots are played.The first one a bit high in the vertical and the last two very close but a few centimeters below.
2º-Loss of the number of shots per load and greater air consumption: I have configured the Condor with hammer  tension two points below 50% of the route. With the hammer of 100 grams. Deposit from 270 bar and stays in 150 bar, with a string of 8 shots. And I notice a considerable increase in the recoil in the rifle. I suppose the reason is that the valve takes longer to close firing with this bullet weight. And I suspect that part of the air is wasted in the exit.
3º - It is a mystery to me why this bullet at such low speed behaves reasonably stable.At least at short distances.I have tested at .305.304 and .303. Being .305 the best group.

[KnifeMaker]

It is coming along nicely!


Knife