Author Topic: Altaros M24 Airgun .22 Prototype 60 FPE! (Read 55455 times - 3 votes)
)

oldpro · « **Reply #220 on:** March 26, 2020, 06:09:29 PM »

Quote from: Altaros on March 26, 2020, 06:04:01 PM

Even at these difficult times, we are still working on our M24 airgun, here is a teaser.

COOL

Rick67 · « **Reply #221 on:** March 26, 2020, 07:53:23 PM »

Can't see the price yet

Yes, I did check the Altaros site

dv8eod · « **Reply #222 on:** March 26, 2020, 08:20:29 PM »

Outside of the pebbled/bedliner look on the stocks, they look very impressive.

Rick67 · « **Reply #223 on:** March 26, 2020, 08:37:37 PM »

Quote from: dv8eod on March 26, 2020, 08:20:29 PM

Outside of the pebbled/bedliner look on the stocks, they look very impressive.

And it's got a threaded barrel shank akin to those on centerfire guns.

I think the filler probe is in the forearm area

I hope it is hand-pump friendly

rintafile · « **Reply #224 on:** March 27, 2020, 06:52:10 AM »

Look's good 👍

Blom13 · « **Reply #225 on:** March 30, 2020, 06:06:24 AM »

very nice, a photo of all the rifle would be better.
I don't see a security lever, is that normal?

Altaros · « **Reply #226 on:** April 15, 2020, 07:52:37 AM »

We do not install on one-shot rifles security lever. Generally I don't believe in any security lever on airguns. For most models, a stronger impact is shot anyway.
If I want to have a rifle safe, so the safest way is to push bolt cylinder to the open position.

The delay we had in the production of rifles was mainly due to the fact that we wanted to complete the project of Altaros bullets ATP a go it on sale.

At this point, we have launched sales for the local market and it will soon be possible to order from abroad.
For a safe journey we have worked on a specific package, because no one wants to get damaged bullets. Especially when sending abroad:

More information is on our second website:
https://www.militaryairgun.com/domu/137-sample-pack-atp-55mm-22.html

Blom13 · « **Reply #227 on:** April 15, 2020, 10:07:57 AM »

all that seems very good to me!
I can't wait to see it all for real.
can give you a date for the sale of your m24 rifle in belgium.
thank you

Nvreloader · « **Reply #228 on:** April 15, 2020, 02:09:51 PM »

The appearance of this rifle is almost a carbon copy of the Rem 700 action/looks minus the safety,
the safety slot is even there......................

I would love to see a good photo of the action, out of the stock..............showing the trigger

Thanks,

Atom · « **Reply #229 on:** April 16, 2020, 07:36:42 AM »

This is too expensive 110 pcs 15 eur!

JSB Slugs 5.7 eur 200 pcs!
https://www.balistas.com/airgun-ammunition/airgun-pellets-55mm-0.22/jsb-knockout-slugs-55mm-200pcs/

MP Mold 5.52 68 eur!
https://www.mp-molds.com/product/552-mm-air-rifle-pellet-8-cav-mold/

MJP · « **Reply #230 on:** April 17, 2020, 04:52:37 AM »

Expensive for lathe turned flawless slug?
You have not shot any Lapua bullets from BP?
1€ easy for one bullet.
15€ a shot with anything bigger, and you call that expensive.
I think the price is very reasonable for turned projectile.

Marko

Altaros · « **Reply #231 on:** May 19, 2020, 08:23:54 AM »

to Atom:
compare the given price with the price at which they were sold by the NSA a few months ago and you will find that it is at least the cheapest slug in Europe. In comparison with the price of FX slug in the USA when sending in the form of a pallet and not directly, the price is again similar.

It is simply not possible to compare the production of projectiles by pressing compared to turning. Exactli how MJP writes.
The production is completely different and is at its beginning, with the assumption that the price will then be further reduced as this new technology will be improve.

if I make one non-standard comparison and I will compare ATP bullets for example with .22LR from Lapua or RWS in the top class at longer shoting, then ATP are more accurate with higher BC and 3x cheaper (price comparison in the Czech Republic ).

JohnnyPDX · « **Reply #232 on:** May 19, 2020, 08:35:16 AM »

It's NOT expensive. You can't have Ferrari performance for Hyundai pricing.

Altaros · « **Reply #233 on:** June 01, 2020, 06:47:52 AM »

One short video from the 61 grain ATP bullets test on an unusual target

ranchibi · « **Reply #234 on:** June 01, 2020, 11:51:02 AM »

Ondrej, cool video, nice shooting and very nice rifle!

MJP · « **Reply #235 on:** June 02, 2020, 03:37:42 AM »

Wow, that is very consistent rig you got there!
If you get that to the whole production set of rifles then there is no competition in the market at this time for what you got!
Superb work Ondrej!

Marko

oldpro · « **Reply #236 on:** June 02, 2020, 11:21:24 AM »

Quote from: MJP on June 02, 2020, 03:37:42 AM

Wow, that is very consistent rig you got there!
If you get that to the whole production set of rifles then there is no competition in the market at this time for what you got!
Superb work Ondrej!

Marko

I agree! The rifle also looks fantastic, cant wait to see one in person. best of luck in your endeavor.

BigBird · « **Reply #237 on:** December 28, 2020, 12:05:15 PM »

I stumbled on this thread from a google search. I see the M24 is still not available on the website. Took a while to read through this and a little embarrassed. Will you be testing this out on pests in the US? You seemed to have missed this bird but a coyote may be more doable at a shorter range if it retains enough energy and the bullet is not a hard alloy.

Rick67 · « **Reply #238 on:** December 28, 2020, 12:18:25 PM »

I am still waiting for this rifle.

The price is affordable, IMHO.

Money is ready

Pellgunfun · « **Reply #239 on:** March 06, 2021, 01:34:56 AM »

Hi guys,

Just giving this a bump in the hopes of seeing the latest status on this setup.

P

Thank you to our advertisers!

Altaros M24 Airgun .22 Prototype 60 FPE!

Author Topic: Altaros M24 Airgun .22 Prototype 60 FPE! (Read 55455 times - 3 votes) )

Author Topic: Altaros M24 Airgun .22 Prototype 60 FPE! (Read 55455 times - 3 votes)
)