Altaros M24 Airgun .22 Prototype 60 FPE!

[jackssmirkingrevenge]

This video that link from Atom should already remove the remaining doubts of even the biggest skeptics.

... except those who would like to know where the reservoir is and some will say that it's convenient that the target was destroyed before you fired those last two pellets.

That being said, beautiful work to fit a powerful air rifle in a "realistic" envelope, even with a limited number of shots.

A small side note, you're firing indoors at a point blank target, perhaps some eye protection would be in order!

[Tony Fryery]

Where’s mine at?? I need one in my life!

[jackssmirkingrevenge]

I'm reminded of the Parker Hale Phoenix that also pulled off the "no visible air tank" trick by concealing a smaller bottle in the stock, apparently good for around 60 shots in .22" at 12 ft lbs:

[Zeddymon]

I'm reminded of the Parker Hale Phoenix that also pulled off the "no visible air tank" trick by concealing a smaller bottle in the stock, apparently good for around 60 shots in .22" at 12 ft lbs:

seems to be what is going on but also seems enough room to hide another small tank in the forearm
the look is very appealing and would probably sell well, good job Altros, and looking forward to the semiauto bullpup video

[jackssmirkingrevenge]

seems to be what is going on but also seems enough room to hide another small tank in the forearm

You could probably squeeze quite a few more cc out of it by having a coaxial tank in a hollow "bull barrel" too...

[21grains]

Looks like a high end "Airsoft" gun to me. My biggest question really besides where the Air is located is how the guns so quiet as well as having zero recoil? Hopefully OP will come back and answer a few of these questions.

Yep,....as is it doesn't pass the smell test.

It Smell's like CO2 by the Power or lack of.....Franky

[Altaros]

I respond to the request for information about the Semi-automatic airgun:

can I ask how to insert links? when I try to paste a link, I will only see the message: Sorry, you are not allowed to post external links.

altaros.cz/en/pcp-rifles/109-altaros-sa-assassin.html

youtu.be/sZSN16LFIvs



I just want to add that this rifle is quite the opposite of M24. It is intended for local European markets where the energy limit is for example 16J.

The patent technologi lies primarily in the fact that even though only waste air is used at shot at the mouth of the barrel, so the semi-automatic works at 16J.
When I asked at the IWA exhibition a few years ago the FX exhibitor, whether he was able to produce a semi-automatic rifle like the FX Revolution at 16J, I was told that it was not possible.
I came to the same conclusion about 7 years ago. This my mistake myself  I refuted four years after and  I did Altaros Sa Assassin   


We also have a variant that works at 7.5J for Germany and Italy market.

For other countries where there is no power limit law, it can be interesting due to lower air consumption and so it is possible to shoot several thousand shots even for smaller bottles. 
Smaller energy has its limitations, but it certainly does not restrict shooting fun and makes firing much safer, which will be greatly appreciated when you want to involve your kids.

[Nomadic Pirate]

60 FPE ? 

.........sure doesn't look like it by the minimal damage and movement from that block of wood.

[Zeddymon]

60 FPE ? 

.........sure doesn't look like it by the minimal damage and movement from that block of wood.

60 FPS?

[Pellgunfun]

60 FPE ? 

.........sure doesn't look like it by the minimal damage and movement from that block of wood.

Maybe the pressure was only enough to cause the pellet to exit the barrel without getting stuck.

[Back_Roads]

 I am tempted to shoot a block of wood with 40 fpe .22 and see what happens. I am assuming things are lost in translation, so I will wait.

[KnifeMaker]

Looks exactly like what I would expect to see at 60 fpe with deep penetrating bullets fired into Heavy  European hardwood. No surprises here.


Well Done Altaros!


KnifeMaker/MikeL

[Nomadic Pirate]

Looks like "premium quality" plain pine to me 

[Gertrude]

Looks like "premium quality" plain pine to me 

looks the same to me.
Plain pine / Douglas fir piece of a 2x4

[Atom]

Looks like "premium quality" plain pine to me 

yea "premium quality" is 31,000 usd 
https://www.altaros.cz/en/pcp-rifles/109-altaros-sa-assassin.html

[Nomadic Pirate]

Looks like "premium quality" plain pine to me 

yea "premium quality" is 31,000 usd 
https://www.altaros.cz/en/pcp-rifles/109-altaros-sa-assassin.html

Now, that one looks like an Airgun,....ugly as sin but nevertheless it definitely looks like a legit airgun.

Maybe someone should let you guys know there's Semi-Auto airguns already out there and they are way south of 3 Grand

[Gertrude]

I am tempted to shoot a block of wood with 40 fpe .22 and see what happens. I am assuming things are lost in translation, so I will wait.

Looks like "premium quality" plain pine to me 

looks the same to me.
Plain pine / Douglas fir piece of a 2x4

just for clarity,
the referrences to Pine / Douglas Fir, were about the wood block being shot.
 (Not the Gun or it's Stock).

[Nomadic Pirate]

Yeah, me too

I think Atom missunderstud the comment.

[moorepower]

Well for the air tank, you have a very small o.d. barrel inside of a 1" O.D. I am guessing Ti tube that is 24-26" long. I'm not going to do the math, but that"s a bit of air. As for the bullet the Hornady 35 grain NT has a G1 of .177. I am a little surprised by the nastiness of a few on this forum and some of the comments of several members, especially knowing that he actually does some pretty cool stuff with airguns. I can't say I would have been as polite in my response as he was, and if any of us got called B.S. on us for something we actually did and showed people, I doubt it would be taken kindly by anyone here. I have seen 2-3 airguns with the tube around the barrel, assuming this is what he is doing. I will get off my soapbox now.

[Zeddymon]

Well for the air tank, you have a very small o.d. barrel inside of a 1" O.D. I am guessing Ti tube that is 24-26" long. I'm not going to do the math, but that"s a bit of air. As for the bullet the Hornady 35 grain NT has a G1 of .177. I am a little surprised by the nastiness of a few on this forum and some of the comments of several members, especially knowing that he actually does some pretty cool stuff with airguns. I can't say I would have been as polite in my response as he was, and if any of us got called B.S. on us for something we actually did and showed people, I doubt it would be taken kindly by anyone here. I have seen 2-3 airguns with the tube around the barrel, assuming this is what he is doing. I will get off my soapbox now.

i admit i should be nicer, i do think they have a solid reputation, and are pretty ingenious , after 10 some odd years in development, clearly on the back burner at times, it does have promise, when finalized i hope he finds someone to market it in the US