Benjamin tank ?

[cpool]

I bought a used small steel Benjamin tank , there are no dive shops here the fire department told me they woul fill it it they had the right fitting I have no ideal what fitting they would need can anybody help? Thanks

[bandg]

Someone may know offhand but if you could post a good picture of the valve it would probably help others help you.

[cpool]

I tried to post a picture it keeps saying the photo is too big

[tracker1955]

I find it easier to use my phone for pictures, email it to myself as a small file, load it to my pictures on laptop from email and then browse to my picture files to load to GTA.

[cpool]

Here is the picture

[Hoosier Daddy]

See if there is a "Paint Ball" shop / park near you, they can fill it.
 You are looking for a place than can connect to a 1/8" Male Foster fitting.

[cpool]

Thanks

[essbend]

The fill port on that Benjamin air tank is a 1/8'' male quick connect (as Hoosier noted). A fireman's air tank has a female CGA-347. You could convert that 1/8'' male foster to female CGA-347.

Here is a female CGA-347 X 1/4'' MNPT adapter:
https://www.ebay.com/itm/CGA-347-SCBA-firefighting-x-1-4-MNPT-Adapter-F-06181/162442004492?hash=item25d24c480c:g:-WQAAOSwDk5T2Vmy:rk:37:pf:0

Here is a FNPT X MNPT, 1/4'' X 1/8'':
https://www.grainger.com/product/1DFX8?gclid=CjwKCAiAlb_fBRBHEiwAzMeEdoU3nNKx7Py5wVrluJ7ZcXg4Q13T47nmioXOYhlggsmFtwC2WvFgPxoCtnIQAvD_BwE&cm_mmc=PPC:+Google+PLA&ef_id=CjwKCAiAlb_fBRBHEiwAzMeEdoU3nNKx7Py5wVrluJ7ZcXg4Q13T47nmioXOYhlggsmFtwC2WvFgPxoCtnIQAvD_BwE:G:s&s_kwcid=AL!2966!3!50916759717!!!g!82128169677!?cm_mmc=PPC:+Google+PLA?campaignid=175663197

Here is a FNPT X Quick Connect, 1/8'' X 1/8'':


You could probably find some better prices if you dug around.
Put some thread sealant on the threads, connect the 3 fittings together snugly, and the fire station should be able to fill it up for you.

[cpool]

Can this hose be connected to a scuba tank to fill my gun. If so what fittings would I need ?

[tracker1955]

I don't think there is any way to use it on a scuba K valve as it has no opening to fit over the valve and be tightened down. I think this is just made to work with Ninga style tanks.

[tracker1955]

You could fill it with a hand pump over multiple short sessions.

[CraigH]

I tried to post a picture it keeps saying the photo is too big

www.shrinkpictures.com      Easy and intuitive.

[Hoosier Daddy]

Can this hose be connected to a scuba tank to fill my gun. If so what fittings would I need ?

So you want to charge your Benjiman bottle using a SCUBA tank?

https://www.pyramydair.com/product/air-venturi-scuba-tank-yoke-k-valve-adapter-hose-with-quick-disconnect?a=7530

Or take the hose off your fill station and used it on a SCUBA tank?

https://www.pyramydair.com/product/air-venturi-scuba-tank-yoke-k-valve-adapter-hose-assembly-1-8-bspp?a=534

https://www.pyramydair.com/product/air-venturi-scuba-yoke-female-quick-disconnect?a=374

[cpool]

Wanted to know if the hose on my little tank would work on a scuba tank

[cpool]

Thanks

[ShakySarge]

Wanted to know if the hose on my little tank would work on a scuba tank

The adapter you have for the little tank wouldn't work on a SCUBA tank.

[Frank in Fairfield]

Is your tank the same as these?
If so then it is carbon fiber.

The right fitting can be bought from Joe at airtanksforsale.com.