Author Topic: Looking for large gen 1 mrod transfer port (Read 401 times))

Shovels · « **on:** November 02, 2018, 06:18:51 PM »

Looking for a large gen 1 mrod transfer port .. let me know what you got or where to look

Motorhead · « **Reply #1 on:** November 02, 2018, 08:42:10 PM »

Tim Hill ... Ebay

FuzzyGrub · « **Reply #2 on:** November 02, 2018, 09:33:10 PM »

FWIW: Gen 2 TP is same as Gen 1. JSAR also has 0.187" poly TPs.

mann · « **Reply #3 on:** November 02, 2018, 11:41:13 PM »

Go to hardware store and get some poly tubing the id is like .170

screwwork · « **Reply #4 on:** November 03, 2018, 12:42:42 AM »

Quote from: mann on November 02, 2018, 11:41:13 PM

Go to hardware store and get some poly tubing the id is like .170

+1
.187 isn't really large though poly tubing is what Travis has used for years, I use it as well without any issues.
Cut it to lenght, heat it up and place over .2 dia drill if possible to cause it to get a larger OD and press it in to fit. Seals great that way too.

Thank you to our advertisers!

Looking for large gen 1 mrod transfer port

Author Topic: Looking for large gen 1 mrod transfer port (Read 401 times))

Shovels

Looking for large gen 1 mrod transfer port

Motorhead

Re: Looking for large gen 1 mrod transfer port

FuzzyGrub

Re: Looking for large gen 1 mrod transfer port

mann

Re: Looking for large gen 1 mrod transfer port

screwwork

Re: Looking for large gen 1 mrod transfer port