Any News On Additional Pellet Molds From NOE



Author Topic: Any News On Additional Pellet Molds From NOE  (Read 313 times))

Offline Loren

  • Plinker
  • **
  • Posts: 244
  • yes
  • Real Name: Loren
Any News On Additional Pellet Molds From NOE
« on: October 26, 2018, 08:28:27 PM »
Has anyone heard anything on additional caliber molds coming from NOE?  I'm still waiting on a .357 and a .30 cal.

I sent Al a note a little over a week ago and didn't hear anything back from him.

  • Kansas

Online Wayne52

  • Moderator
  • GTA Senior Contributor
  • *****
  • Posts: 13418
  • Real Name: Wayne
Re: Any News On Additional Pellet Molds From NOE
« Reply #1 on: October 27, 2018, 12:04:23 AM »
I'm getting anxious for the .22 hunter myself Loren !!! I liked doing the group buys myself ???
  • Kalamazoo Mi
HHD Sup Com Cam Ranh Bay Vietnam 71-72

Offline Loren

  • Plinker
  • **
  • Posts: 244
  • yes
  • Real Name: Loren
Re: Any News On Additional Pellet Molds From NOE
« Reply #2 on: October 27, 2018, 03:30:38 PM »
I'm getting anxious for the .22 hunter myself Loren !!! I liked doing the group buys myself ???

I would be happy to do any kind of buying ...lol  There is just a bigger return on the mold investment with the larger calibers, although a .22 cal would be nice too.
  • Kansas

Offline Nvreloader

  • Expert
  • *****
  • Posts: 1131
  • Real Name: Don
Re: Any News On Additional Pellet Molds From NOE
« Reply #3 on: October 27, 2018, 05:57:35 PM »
Ok Guys

I am a little bit confused, so don't be surprised..............

I am just about ready to get the pellet mold, that Wayne shows in his photo's, the 217-24-RF mold.
and now you guys are talking about a 22 Hunter mold etc?

I have the funds in my hidden Rat Hole, just burning a hole, to spend it. LOL  ;)

Is or are there 2 different molds, now?

I have not been able to figure out Noe's coding on these molds, just what everything means......etc.
The info on the site, just doesn't provide that much help to the unknowing,........IMHO,
such as, there is 4 pins/rods for different weights, on the 217-24-RF mold etc.

Can someone guide me down the right path?  It would be greatly appreciated by this OF.........

Tia,
Don
  • Western  NV
Hammerli 850 Air Mag -17 cal x2
QB-79 - 22 cal
AF Recon Condor 22 cal- pending
CF 4500 45 min SCBA tanks x 3, w/SB F-10 compressor

"We must reject the idea that every time a law's broken, society is guilty rather than the lawbreaker,
It is time to restore the American precept, that each individual is accountable for their actions."
Ronald Reagan
-----------------------------------------------------
"Speeds fine, but Accuracy is final"

Online Wayne52

  • Moderator
  • GTA Senior Contributor
  • *****
  • Posts: 13418
  • Real Name: Wayne
Re: Any News On Additional Pellet Molds From NOE
« Reply #4 on: October 27, 2018, 06:46:19 PM »
Don the hunter is a shorter pellet than the magnum hunter, I really like the magnum hunters but also looking forward to the regular hunters because they're going to be a lighter pellet better for the less powerful guns.
  • Kalamazoo Mi
HHD Sup Com Cam Ranh Bay Vietnam 71-72

Online rsterne

  • Member 2000+fps Club
  • Bob and Lloyd
  • GTA Senior Contributor
  • *****
  • Posts: 20253
  • GTA Forums Person of the Year 2017
    • Mozey-On-Inn
  • Real Name: Bob
Re: Any News On Additional Pellet Molds From NOE
« Reply #5 on: October 27, 2018, 07:57:36 PM »
The 217-24-RF is called the "Magnum Hunter".... there is a lighter one coming, the "Hunter", and also an even lighter "Target" wadcutter, just like in the .25 cal moulds from NOE....

Bob
  • Coalmont, BC, Canada
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal:
1750 CO2 Carbine, .177 Uber-Pumper, .22 Uber-Carbine, .25 Discovery, 2260 PCP 8-shot Carbine, 2260 HPA (37 FPE), 2560 HPA (52 FPE), .22 QB79 HPA, Disco Doubles in .22, .25 & .30 cal, "Hayabusa" Custom PCP Project (Mk.I is .22 & .25 cal regulated; Mk.II is .224, .257, 7mm, .308 & .357; Mk.III is .410 shotgun and .458 cal), .257 "Monocoque" Bench PCP, 6mm Regulated PCP and .257 Unregulated, Two BRods.

Offline Nvreloader

  • Expert
  • *****
  • Posts: 1131
  • Real Name: Don
Re: Any News On Additional Pellet Molds From NOE
« Reply #6 on: October 27, 2018, 08:10:21 PM »
Thanks,

Wayne and Bob for the info, I'll get the Mag Hunter first, to see how it goes.......... ;)

Tia,
Don
  • Western  NV
Hammerli 850 Air Mag -17 cal x2
QB-79 - 22 cal
AF Recon Condor 22 cal- pending
CF 4500 45 min SCBA tanks x 3, w/SB F-10 compressor

"We must reject the idea that every time a law's broken, society is guilty rather than the lawbreaker,
It is time to restore the American precept, that each individual is accountable for their actions."
Ronald Reagan
-----------------------------------------------------
"Speeds fine, but Accuracy is final"

Online rsterne

  • Member 2000+fps Club
  • Bob and Lloyd
  • GTA Senior Contributor
  • *****
  • Posts: 20253
  • GTA Forums Person of the Year 2017
    • Mozey-On-Inn
  • Real Name: Bob
Re: Any News On Additional Pellet Molds From NOE
« Reply #7 on: October 27, 2018, 08:43:18 PM »
BTW, all the NOE pellet moulds are coming with four sets of the RG pins.... 3 hollow base of different depths, and one flat base.... a total of four weights possible.... They are included in the price of the RG moulds....

Bob
  • Coalmont, BC, Canada
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal:
1750 CO2 Carbine, .177 Uber-Pumper, .22 Uber-Carbine, .25 Discovery, 2260 PCP 8-shot Carbine, 2260 HPA (37 FPE), 2560 HPA (52 FPE), .22 QB79 HPA, Disco Doubles in .22, .25 & .30 cal, "Hayabusa" Custom PCP Project (Mk.I is .22 & .25 cal regulated; Mk.II is .224, .257, 7mm, .308 & .357; Mk.III is .410 shotgun and .458 cal), .257 "Monocoque" Bench PCP, 6mm Regulated PCP and .257 Unregulated, Two BRods.

Online Wayne52

  • Moderator
  • GTA Senior Contributor
  • *****
  • Posts: 13418
  • Real Name: Wayne
Re: Any News On Additional Pellet Molds From NOE
« Reply #8 on: October 28, 2018, 04:23:19 AM »
They're predicting light rain all day for Sunday and I think I'll put the longest pins back in my 250-27-RF mold because I've been shooting up a lot of my lightest pellets from that mold.  I've got an Optivisor that I use for close inspection of the molds and through very close inspection I found a very small build-up of lead dust inside the cavities, it looks to me like every 1000  pellets cast using a 2 cavity it's going to be a good idea to thoroughly clean the molds entirely from now on.  I did already clean everything thing on it after the last run but before I install the longest pins again I'm going to also inspect them closely because they too will get a small build-up of the lead dust on them as well.

A toothpick works good for getting the lead dust broken free to wash off in dish soap, rinsed then dried.
« Last Edit: October 28, 2018, 06:32:48 AM by Wayne52 »
  • Kalamazoo Mi
HHD Sup Com Cam Ranh Bay Vietnam 71-72

Offline Loren

  • Plinker
  • **
  • Posts: 244
  • yes
  • Real Name: Loren
Re: Any News On Additional Pellet Molds From NOE
« Reply #9 on: October 28, 2018, 10:18:00 PM »
I have noticed some minor buildup in the molds and on pins and done the same cleaning methods. 


Looks like no news on the larger caliber molds....bummer!  This darn Winchester 70-35 I bought will only shoot diabalo pellets really well.  Everthing else is just so, so and then a darn wild flyer.  In for a penny in for a pound so off to Accurate to get their 36-094N pellet mold made and the base pins made by Erik at Hollowpointmold.com.

I did try this pellet from Rick M. and they did just as well as the JSB's in this rifle.
  • Kansas

Online Wayne52

  • Moderator
  • GTA Senior Contributor
  • *****
  • Posts: 13418
  • Real Name: Wayne
Re: Any News On Additional Pellet Molds From NOE
« Reply #10 on: October 29, 2018, 04:02:59 AM »
Loren I had remarkable results casting in the morning yesterday, out of 438 cast I only had 4 rejects.  All of them were really close to what I expected to see in the light pellets from the 250-27-RF mold which is really close to 26 grains with very little variation at all.
  • Kalamazoo Mi
HHD Sup Com Cam Ranh Bay Vietnam 71-72

Offline Loren

  • Plinker
  • **
  • Posts: 244
  • yes
  • Real Name: Loren
Re: Any News On Additional Pellet Molds From NOE
« Reply #11 on: October 29, 2018, 02:41:44 PM »
Master of your own ammo domain!!! It is pretty...right???
  • Kansas

Offline Loren

  • Plinker
  • **
  • Posts: 244
  • yes
  • Real Name: Loren
Re: Any News On Additional Pellet Molds From NOE
« Reply #12 on: December 06, 2018, 04:49:04 PM »
Al just put the .30cal Hunter Pellet molds in the store. 

I got mine!!! Did you get yours?  8)
  • Kansas

Online rsterne

  • Member 2000+fps Club
  • Bob and Lloyd
  • GTA Senior Contributor
  • *****
  • Posts: 20253
  • GTA Forums Person of the Year 2017
    • Mozey-On-Inn
  • Real Name: Bob
Re: Any News On Additional Pellet Molds From NOE
« Reply #13 on: December 06, 2018, 09:21:48 PM »
The NOE .30 cal Hunter pellet moulds are now in the store.... 46-51 gr.... http://noebulletmolds.com/NV/index.php?cPath=30_585

*LOL* Loren beat me to it !!!!

Bob
  • Coalmont, BC, Canada
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal:
1750 CO2 Carbine, .177 Uber-Pumper, .22 Uber-Carbine, .25 Discovery, 2260 PCP 8-shot Carbine, 2260 HPA (37 FPE), 2560 HPA (52 FPE), .22 QB79 HPA, Disco Doubles in .22, .25 & .30 cal, "Hayabusa" Custom PCP Project (Mk.I is .22 & .25 cal regulated; Mk.II is .224, .257, 7mm, .308 & .357; Mk.III is .410 shotgun and .458 cal), .257 "Monocoque" Bench PCP, 6mm Regulated PCP and .257 Unregulated, Two BRods.

Online Wayne52

  • Moderator
  • GTA Senior Contributor
  • *****
  • Posts: 13418
  • Real Name: Wayne
Re: Any News On Additional Pellet Molds From NOE
« Reply #14 on: December 07, 2018, 05:16:43 AM »
I'm thinking that the .30 cal Hunter will be a winner for the casters, I know that my .25 Hunters are top notch from my NOE 250-27-RF mold.
  • Kalamazoo Mi
HHD Sup Com Cam Ranh Bay Vietnam 71-72

Offline maraudinglizard

  • If you are not living on the edge, you are taking up to much space.
  • GTA Senior Contributor
  • ******
  • Posts: 2507
  • Real Name: Kris
Re: Any News On Additional Pellet Molds From NOE
« Reply #15 on: December 07, 2018, 07:14:10 AM »
I ordered the newest .30 cal. mold yesterday for the Hatsan 135. I've had good results with the .25 cal. in the marauder.
  • Northwest Florida
Crosman
1377(30+ years)
1322
2240
66
1077
2300kt.177
2400kt.177
1720T
G1 Extreme .177
Vigilante
Venom .22
Win M14
RWS 34
Urban.22
Daisy 1000, 717, 880
Umarex Fusion .177, Gauntlet .22
Wildfire.177
Maxi.177
Disco.22
Prod.22
Gen 2 Mrod .25
Colt PM LE
Auto Air ll .177
S&W M&P 45 .177
P-17, QB78 .22 & .177
Benji Trail NP Pistol .177
D E Pistol .177
Sig Sauer P250.177, MCX.177
Rex P .357
Hatsan 25 pistol .22, 1000x .25, 135 QE .30
Carnivore
909 and Recluse

Offline Bob Pratl

  • Marksman
  • ***
  • Posts: 311
  • Real Name: Bob Pratl
Re: Any News On Additional Pellet Molds From NOE
« Reply #16 on: December 07, 2018, 07:35:38 AM »
I ordered the newest .30 cal. mold yesterday for the Hatsan 135. I've had good results with the .25 cal. in the marauder.
I also just ordered a .30 Hunter mold for a Mrod that I'm in he process of converting to .30 from .25.
  • Gloucester,Massachusetts
.25   Dynamic DAR 25
.25   Rainstorm II
.25   Hatsan Bullboss
.25   Benjamin Marauder-being converted to .30
.22   Benjamin Marauder pistol
.22   Crossman Venom
.22   Crossman 2240/2250 10.4" (CO2)/(HPA)
.22   Mrodair CP-1M Pistol  with CP2 grip (CO2)  
.22   Mrodair CP-2 Carbine (CO2)
.22   Mrodair AirMax MK II
.22   Mrodair Varminter PR900W
.22   Umarex Gauntlet
.177  FAS 6004
.177  Sig Sauer MCX (CO2)/(HPA)
.177  Airforce Edge
.177  Benjamin Wildfire
Yong Heng Compressor

Online rsterne

  • Member 2000+fps Club
  • Bob and Lloyd
  • GTA Senior Contributor
  • *****
  • Posts: 20253
  • GTA Forums Person of the Year 2017
    • Mozey-On-Inn
  • Real Name: Bob
Re: Any News On Additional Pellet Molds From NOE
« Reply #17 on: December 07, 2018, 11:51:59 AM »
Last day today, Dec. 7,  for 20% Discount.... use Code c51c9f55 .

Bob
  • Coalmont, BC, Canada
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal:
1750 CO2 Carbine, .177 Uber-Pumper, .22 Uber-Carbine, .25 Discovery, 2260 PCP 8-shot Carbine, 2260 HPA (37 FPE), 2560 HPA (52 FPE), .22 QB79 HPA, Disco Doubles in .22, .25 & .30 cal, "Hayabusa" Custom PCP Project (Mk.I is .22 & .25 cal regulated; Mk.II is .224, .257, 7mm, .308 & .357; Mk.III is .410 shotgun and .458 cal), .257 "Monocoque" Bench PCP, 6mm Regulated PCP and .257 Unregulated, Two BRods.

GTA - What's been your success with air gun target practice?