Any US importers carrying this gun?

[Wayne52]

It's much better than the Storm Rider IMO.  Made with good materials that don't normally give out during regular use.  I think that most all Chinese airguns are made of substandard materials in comparison to many others made from better metal.  The Nova Vista's are no exception either but they are finished real well.

[avator]

The only advantage with the StormRider might be that it's a repeater.
Mods/customer service and parts availability advantages goes to the Disco and/or Maximus.
The StormRider is a 3k gun.... more hand pumping.

[AVS Stephen]

This is how good the Nova Liberty and AVS slugs perform. What a fun day

[darkcharisma]

you didnt shoot one of the 54 fpe modded guns?

btw, i am here or text directly if you need any support, i can aslo look at the 50fpe gun and make sure she performs  up to 55fpe. none of this will cost you but one way shipping to me, so don't hesitate even after 30 days.   

[USAFANG6799]

You're Da Man Stephen!
And when the .25 comes out you'll be able to really click your heels !

[SILENT SQUIRREL]

The only advantage with the StormRider might be that it's a repeater.
Mods/customer service and parts availability advantages goes to the Disco and/or Maximus.
The StormRider is a 3k gun.... more hand pumping.

Thanks Duy
I am now strongly considering the Discovery, Maximus, & Beeman QB Chief.
The Beeman joined the group after learning of its accuracy via Tom Gaylord's 6 part review.
All 3 are 2k fills; easily done  with my hand pump
I may even go .177 for the higher shot count.
Exploring silencers before purchasing because, as you know, all 3 are very loud.

[SILENT SQUIRREL]

You're Da Man Stephen!
And when the .25 comes out you'll be able to really click your heels !

Is there a Liberty 25 in the works at ATI?

[Wayne52]

Stephen I REALLY enjoyed watching that video, that's a super cool range you're going to too.  I know these guns are accurate because I've been shooting my Liberty and Freedom a lot since I bought them. I still haven't done the barrel port yet on either one but I'm sure that I will eventually.  I'll either shim the hammer spring or just order a little heavier spring for it when I do.

[Madd Hatter]

You're Da Man Stephen!
And when the .25 comes out you'll be able to really click your heels !

Is there a Liberty 25 in the works at ATI?

When someone figures that out they'll know the winning power ball numbers too! !!! LOL

[USAFANG6799]

You're Da Man Stephen!
And when the .25 comes out you'll be able to really click your heels !

Is there a Liberty 25 in the works at ATI?

They are in Brazil from what I've read here on GTA.
No word as to if they will offer them in US yet.

[Wayne52]

Robert I read somewhere else on the forum that ATI has no intentions of importing them in .25 cal.  It's sad because they'd make a heck of a 25 cal I'm sure.

[AVS Stephen]

you didnt shoot one of the 54 fpe modded guns?

btw, i am here or text directly if you need any support, i can aslo look at the 50fpe gun and make sure she performs  up to 55fpe. none of this will cost you but one way shipping to me, so don't hesitate even after 30 days.   

Hey Duy, thank you! I did shoot them but both barrels were drilled and need some cleaning up. Groups were a mess because the burrs in port. Also I fixed the creeping regulator. I believe the gun was acting like an unregulated gun because the regulator adjuster was too far away from the brass Piston to make a seal. I believe the regulator has a maximum PSI of around 3,200 PSI. After 3200 the Belleville washers get compressed to the maximum and no longer seal against the delran stopper. Again this is just my experience. Once I turn the regulator down it he came consistent. Shooting 26 grain slugs at 925fps.

Well now I'm trying to figure out the differences in my three guns. One gun is the stock gun the second fun is stock valve and ports drilled out to dark charisma specs and the third gun DC valve and DC drill ports. I am trying to learn the differences in power and efficiency between the three guns. I will report as soon as I have a better understanding. Again thank you so much for all your help.

I am now wearing one of your DC valve around my neck as jewelry. It is way too nice to put in a gun. Lol

[darkcharisma]

LOL, did you know brass is antimicrobial? it may be good to use as hand sanitizer lol. my next valve will be out of 416 polished or colored...my schedule is clear. woot!

are the barrel ports drilled to .217? you wont have a problem loading pellets if you fast load or turn the gun on the left side.

if you need to go 62fpe, give Billy a hola! if ya cant reach him ill relay.

i am also compiling a list for Billy if custom plenums are desired. pm me contacts if anyone wants one.

[Madd Hatter]

As far as getting a. 25 liberty we just need a TJ barrel and some way of increasing the dia. of the bolt. so it can seal behind the barrel. Who knows,  maybe PA will pickup the Liberty line. They already sell the Aspen so why not the liberty.

[cosmic]

  Great shooting Steve !! Waiting for my .177 to get back from Duy...  You can't believe the work on my rifle he has done for me !!  Each and every time he gets to tinker...  WOW that's a idea!!! Then he shares with me.. I think Duy and I are over 190 texts !! Can't wait Brother Duy!! He sent me a birthday present also ... Hmmmmmm..
  Thank you Steve for what you share with all of us.. ... We all benefit with all the knowledge shared here !!!!!!!

[cosmic]

Still would like to know if the barrel probe and probe sleeve are interchangeable between the Liberty and the Aspen...

[AVS Stephen]

  Thank you Steve for what you share with all of us.. ... We all benefit with all the knowledge shared here !!!!!!!

Ray, I just want more people to experience the "joy of Airgun shooting". A happy little golf ball gets shot here and a happy little shot gun shell get shot there...Bob Ross 1980s

[green]

  Thank you Steve for what you share with all of us.. ... We all benefit with all the knowledge shared here !!!!!!!

Ray, I just want more people to experience the "joy of Airgun shooting". A happy little golf ball gets shot here and a happy little shot gun shell get shot there...Bob Ross 1980s

And somewhere the Airgun Gods are smiling! (and FX owners are crying!) lol  Thanks again for the video Stephen

[Madd Hatter]

Still would like to know if the barrel probe and probe sleeve are interchangeable between the Liberty and the Aspen...

The pellet probe for both the liberty and freedom n .22 are the same part number. The sleeve that the pellet probe slides in inside of the receiver is the same part number also for the .22 so it logically would seem to me that the probe and sleeve from the .25 Aspen would swap no problem with the Liberty.

[Antwuan Maxx]

Where can I get replacement o-rings for a Liberty fill probe?  I contacted ATI, but they didn't have any on hand.