Author Topic: Any US importers carrying this gun? (Read 151419 times - 8 votes)
)

AVS Stephen · « **Reply #800 on:** January 14, 2019, 01:14:46 PM »

Working on a thumb hole walnut stock. About half done. Here are a few pics of my progress. I will post a video and some pics when it's complete.
Did I mention I love this gun and it deserves a beautiful stock.

AVS Stephen · « **Reply #801 on:** January 14, 2019, 01:15:24 PM »

One more photo

cosmic · « **Reply #802 on:** January 14, 2019, 03:03:53 PM »

Zac, the hammer spring washers are 6mm if you want a bit more speed.. I have a .177 and it didn't have any !!

cosmic · « **Reply #803 on:** January 14, 2019, 03:05:15 PM »

STEVE. WOW !!!

cosmic · « **Reply #804 on:** January 14, 2019, 03:11:32 PM »

If I had the tools I would make one with a much higher cheeckpiece .. Even most adjustable ones are to short.. High cheek bones I guess ... Maybe make one like on my 54 thats long gone..

halr · « **Reply #805 on:** January 14, 2019, 05:14:48 PM »

I received my Nova Liberty last week. The rifle arrived with no air in the gun. I had no problems airing up the gun to 300 bar and my rifle had no leaks. I put a few pellets through the rifle with the iron sights to check function and every thing works fine. I did notice that the bore on this rifle seems to be much tighter than on any of my other air rifles ( I have a FX Gladiator, Hatsan Gladius, Hatsan Flashpup, Umarex Gauntlet and a Crosman Marauder). I can feel the pellet being forced into the rifling at the end of the stroke.

I have not chronographed the rifle yet. I put a scope on the rifle and got the rifle more of less zeroed. I shot the first group in the gun with Air Arms 16gr. pellets and to surprise the first group was 0.178 inches. The next groups opened up but that is because I need a much higher comb on the rifle due to some scope parallax issues. After the third group I padded up the comb with some rags and it helped bring the group sizes back down.

kzz1kaw · « **Reply #806 on:** January 14, 2019, 07:31:21 PM »

Quote from: thebanker4 on January 14, 2019, 01:15:24 PM

One more photo

Can you do a YouTube video on how you are making a rifle stock as I would love to see your setup😎

kzz1kaw · « **Reply #807 on:** January 14, 2019, 07:32:22 PM »

Quote from: cosmic on January 14, 2019, 03:05:15 PM

STEVE. WOW !!!

+1😎

tracker1955 · « **Reply #808 on:** January 14, 2019, 08:20:21 PM »

Cosmic, what about the 3/8's or 5/8's pads at the bottom of this page? Also can you use lower rings or would your scope touch the shroud?

https://godagrip.com/cheek-pads-2/

Fwawa20 · « **Reply #809 on:** January 15, 2019, 01:07:38 AM »

Stephen, looks like you are having fun with this little jewel. Can’t wait to see the stock after you are finished.

SoCalZac · « **Reply #810 on:** January 15, 2019, 11:07:06 AM »

Ray thanks for the washer size. Steve that stock looks like it’s going to be awesome. Can’t wait to see it all finished up.

superchikn · « **Reply #811 on:** January 15, 2019, 12:57:13 PM »

Guys,
I had GEO print up some K baffles, and expansion chamber wrapped in felt and dropped those and a spring in my shroud last night. The result was nothing more than a soft poof at about 31fpe. The 18 gr pellet hitting a branch in a tree about 100' away was three times as loud as the report. This is much much better than the Benjamin baffle and much better then the 4 other baffles I had been using from somewhere else. GEO and I are working on a drop in set that you can order directly from him. We are trying to fine tune the setup a bit as I had just requested some generic pieces. BTW this all drops in under the factory shroud cap.

Geo does really nice work and is a great guy to do business with!

More to follow.

USAFANG6799 · « **Reply #812 on:** January 15, 2019, 01:08:02 PM »

Who is GEO and how do I contact him if?
If and when I get my Liberty back from ATI it sounds like an upgrade I should do.

Thanks!

Matt

superchikn · « **Reply #813 on:** January 15, 2019, 01:59:41 PM »

Geo Schoonmaker, He is a member here. Do a search. We should probably have something within a few days.

AVS Stephen · « **Reply #814 on:** January 15, 2019, 02:04:57 PM »

Quote from: superchikn on January 15, 2019, 12:57:13 PM

Guys,
I had GEO print up some K baffles, and expansion chamber wrapped in felt and dropped those and a spring in my shroud last night. The result was nothing more than a soft poof at about 31fpe. The 18 gr pellet hitting a branch in a tree about 100' away was three times as loud as the report. This is much much better than the Benjamin baffle and much better then the 4 other baffles I had been using from somewhere else. GEO and I are working on a drop in set that you can order directly from him. We are trying to fine tune the setup a bit as I had just requested some generic pieces. BTW this all drops in under the factory shroud cap.

Geo does really nice work and is a great guy to do business with!

More to follow.

Hey Ray, that sounds great. Please let everyone know when you have them for sale. Thanks

superchikn · « **Reply #815 on:** January 15, 2019, 02:28:26 PM »

I will. Geo does the engineering, printing, selling shipping etc. Lets just say i dragged him into this one or made him aware or whatever.

Back_Roads · « **Reply #816 on:** January 15, 2019, 08:07:06 PM »

Great to read GEO has something in the works, Is there a list of LDCs etc. that he has for sale ?

smythsg · « **Reply #817 on:** January 15, 2019, 09:53:11 PM »

Ray thanks to you and GEO for working out the details. I will certainly be interested when everything is ready.

superchikn · « **Reply #818 on:** January 15, 2019, 09:56:43 PM »

Back_Roads,
I don't know what all Geo has available, PM him. My first contact was a few weeks ago, I ordered his LDC for stock barreled 1322. I was so impressed with it I asked him to print me some baffles in .177 and .22 to experiment with. The price was right so I ordered 10 of each and he generously threw in some expansion chambers and felt. I asked for the baffles in 15 mm OD which fits the carbon fiber tubes i have and the Liberty shroud.
Geo and I had a great conversation tonight and he is working on some design updates for testing. I think it will be more than a few days but will keep everyone in the loop.

AVS Stephen · « **Reply #819 on:** January 15, 2019, 10:27:51 PM »

Making progress on the thumb hole stock. coming better than I thought it would.

Thank you to our advertisers!

Any US importers carrying this gun?

Author Topic: Any US importers carrying this gun? (Read 151419 times - 8 votes) )

Author Topic: Any US importers carrying this gun? (Read 151419 times - 8 votes)
)