Any US importers carrying this gun?

[Rat Sniper (AKA: PaulT58)]

Mark & Frankie:  Thank you!  I have it back together and working again!  I need to figure out a way to break that video into different sections so I can go right to what I need!  Tons of great info in it, but sometimes it's hard to find what you need without watching all of it!  Thanks again for the help!

WRT the magazines, as far as I can tell, the ATI Liberty Magazines are identical to the Gauntlet magazines.  The Marauder magazines are just a bit narrower and fit on the loose side.  They work, they just don't seat as snuggly as the Gauntlet and ATI Liberty magazines do.  On Amazon you can get the Gauntlet mags for around $10 each with free Prime shipping.  ATI wants $14.95 plus shipping.  Marauder mags on Amazon are around $12.95 each.  I bought 2 Gauntlet .177 mags from Amazon and use them with the ATI Liberty mags, and can't tell the difference without looking at the back of the magazines.  The Gauntlet mags have the Umarex logo, the ATI Liberty mags and Marauder mags are blank.

[tracker1955]

Lostcoast, one of my two mags had to be replaced, just sent it to ATI Wednesday and am waiting on the replacement. Tried the normal fix that works on mrod mags but just didn't want to work on the Liberty mag. I bent the spring to increase the tension pushing it into the hole in the back plate but no matter what I tried it would pop out when I wound it to fill the mag, the other one works perfectly. I also use my three mrod mags with the Liberty and they work just fine, they just don't snap when you insert them in the breach but feed perfectly. Hope this helps.

[Lostcoast]

Lostcoast, one of my two mags had to be replaced, just sent it to ATI Wednesday and am waiting on the replacement. Tried the normal fix that works on mrod mags but just didn't want to work on the Liberty mag. I bent the spring to increase the tension pushing it into the hole in the back plate but no matter what I tried it would pop out when I wound it to fill the mag, the other one works perfectly. I also use my three mrod mags with the Liberty and they work just fine, they just don't snap when you insert them in the breach but feed perfectly. Hope this helps.

Thanks very much for the mag information, gentlemen - very helpful.

[huklbery]

Dealing with Chinese supplied material can be hit & miss.  Visualy the Nova Vista mags look identical to the Umarex ones (Thanfully Umarex has the back labled).  The Umarex ones are easy to find and seem to be best price in this case, so I would buy additional branded Umarex.

[Gbcool1]

Lostcoast, one of my two mags had to be replaced, just sent it to ATI Wednesday and am waiting on the replacement. Tried the normal fix that works on mrod mags but just didn't want to work on the Liberty mag. I bent the spring to increase the tension pushing it into the hole in the back plate but no matter what I tried it would pop out when I wound it to fill the mag, the other one works perfectly. I also use my three mrod mags with the Liberty and they work just fine, they just don't snap when you insert them in the breach but feed perfectly. Hope this helps.

Exact same issue here. What I did to fix mine was to put a drop of glue into the hole where the spring goes into the case. Haven’t had an issue since. Also, on the advice of this thread, I ordered two .22 Gauntlet mags from Amazon. Haven’t had a chance to shoot them yet, but I like the fit into the breech.

I sent one of my mags in for warranty replacement but I’ve not received one as of yet. In all fairness, I sent mine in right before the Black Friday promo and I know they got really busy shipping out these rifles so I will cut them a little slack.

The other difference I have noted is that the Gauntlet mags have 3 holes for spring in the base, which i assume means you can change th spring position to a different hole over time as the spring begins to fatigue.

[Chester]

I hope this works, here is a link to the Spreadsheet Pat got from Jennifer.  It's pretty cool the way they laid it out.  Let me know if you can't download it and I'll try something else:
Thanks for the file. Just added it to my dropbox. Got a 22 liberty coming. Chet
https://www.dropbox.com/s/2mk11xvnukz5fwy/Assembly%C2%A0Instructions%C2%A0For%C2%A0HP-P1000W_HP-P900W.xlsx?dl=0

If anyone needs it i converted the spread sheet to PDF

https://www.dropbox.com/s/wb1ef7kpzs2pc9h/Assembly%C2%A0Instructions%C2%A0For%C2%A0HP-P1000W_HP-P900W.pdf?dl=0

[tracker1955]

Had a curious thing happen the last couple of days with my Liberty, the POI would shift every time I picked it up to shoot a new session. I checked all the bolts on the action to make certain it wasn't something loose causing the shift, also checked scope mounts and rings, but still issues with POI and groups had opened up also. Thought maybe the barrel was fouled so did an additional cleaning as this barrel in fairly tight, and thought all the shooting might have left residue in the barrel. Still, POI shifts continued in the next two sessions requiring me to adjust zero and not stacking pellets as before. Was starting to think my scope had gone wonky but before blaming the scope I tried one last thing, I opened the end of the shroud and removed the Crosman baffle from the NP2 I'd added. Next round I shot for group size and it had shrunk back to where it belonged, so I re-zeroed the scope and my shots continued to stack as before. Not sure why the rifle suddenly didn't like the baffles any longer but at least it's back to shooting as it had prior. It has more snap now with the NP2 baffles removed, but will gladly trade accuracy and consistency for sound suppression. Has anyone else had accuracy issues after adding the baffles to their shroud?

[USAFANG6799]

Tom, Haven't had a POI or accuracy issues with the baffle I installed.
Thanks for the heads up and will remember this if and when it starts happening.

[tracker1955]

Yes, thought it was odd myself, why was it fine when first installed then several days later decide to go wonky. Checked it again this morning and had that satisfying feeling when all ten shots went through the same hole. I wanted to check it early before any wind came up to push it off center so I knew my zero was good.

[SoCalZac]

I finally heard back from ATI about my leaky gun, it has been 3 weeks since they received it back.

They told me they have no way to pump the gun up to try to fix the leak and are going to be sending me a replacement with a wood stock like I asked for at no charge to me. Kind of upset that they kept me waiting for 3 weeks when they had no way to even test it/pump it up. Obviously airguns are not their main focus and I wouldn’t expect much help from them on problems/repairs. At least they have gotten the parts diagrams for us.

I look forward to getting the gun back and plan on at least shimming the hammer spring.

[Fwawa20]

I finally heard back from ATI about my leaky gun, it has been 3 weeks since they received it back.

They told me they have no way to pump the gun up to try to fix the leak and are going to be sending me a replacement with a wood stock like I asked for at no charge to me. Kind of upset that they kept me waiting for 3 weeks when they had no way to even test it/pump it up. Obviously airguns are not their main focus and I wouldn’t expect much help from them on problems/repairs. At least they have gotten the parts diagrams for us.

I look forward to getting the gun back and plan on at least shimming the hammer spring.

Yeah. They are a more firearms focused company as in Ar platform rifles. I think they will probably be getting more help on the airgun side of things though. Might be a good job opportunity for someone if they live close to them.

[USAFANG6799]

Obviously airguns are not their main focus and I wouldn’t expect much help from them on problems/repairs.

Sounds like they though this was just going to be a commodity item akin to the powder burners they sell. Once they sell them they very rarely get returns or hear from the customer again.
I'm wondering if their now asking themselves what the heck have they gotten themselves into. Doesn't sound like they really thought this through.
I'd be very surprised to see them keep the contract for much more than a year.

[kzz1kaw]

Obviously airguns are not their main focus and I wouldn’t expect much help from them on problems/repairs.

Sounds like they though this was just going to be a commodity item akin to the powder burners they sell. Once they sell them they very rarely get returns or hear from the customer again.
I'm wondering if their now asking themselves what the heck have they gotten themselves into. Doesn't sound like they really thought this through.
I'd be very surprised to see them keep the contract for much more than a year.

+1 😳

[Bob Pratl]

When they are having a SUPER SALE we will know that they are throwing in the towel.

[USAFANG6799]

When they are having a SUPER SALE we will know that they are throwing in the towel.

In a way I hope not because I don't need another air rifle no matter how much I like this one 

[Gertrude]

I'm sure it's been mentioned somewhere earlier in this thread, but I really don't want to go reading thru 30+ pages to find it.

 Can any of you who have purchased this gun tell me how long it took to arrive once you had ordered and paid for it ?
Thanks

[Back_Roads]

  5- 7 days to my door 3x

[Gertrude]

Thank you

[SoCalZac]

It seems that it takes a couple days for ATI to ship orders but once shipped mine arrived in a couple days. About a week total from the time I ordered to the time I received it.

[superchikn]

I'm only a couple of states away but I ordered mine Cyber Monday night and received it that Friday.