Author Topic: Any US importers carrying this gun? (Read 151538 times - 8 votes)
)

Back_Roads · « **Reply #620 on:** December 09, 2018, 06:27:06 PM »

I have had some double feeds with the mag, have to be vigilant at making sure you operate the side lever through its full cycle, haven't looked into a cure yet.

AVS Stephen · « **Reply #621 on:** December 09, 2018, 06:39:07 PM »

I just uploaded a video to you tube detailing what I could. Hope this is helpful.

Paul E · « **Reply #622 on:** December 09, 2018, 07:35:42 PM »

Good review Banker.

superchikn · « **Reply #623 on:** December 09, 2018, 08:36:16 PM »

Nice video Stephen, thanks for the mention on the baffle. I like what you did with it.

pat585 · « **Reply #624 on:** December 09, 2018, 08:38:50 PM »

Stephen = Great video. Thanks for the time & effort. I'm sure a lot of people will like that it shoots slugs good. I think this rifle will keep you busy for a while!!

smythsg · « **Reply #625 on:** December 09, 2018, 09:23:08 PM »

Awesome video Stephen, helps clear up many of the mysteries of the Liberty!!! Very happy to see the 21 gn Cudas did well, they are one of my fav pellets.

skorec · « **Reply #626 on:** December 09, 2018, 10:02:36 PM »

Not good but excellent/supercalafrageisticexpialadotion review.

Notice.
The Monsters R probably start spiraling at 75 yd and Heavies was shooting probably too hot.

SoCalZac · « **Reply #627 on:** December 09, 2018, 10:08:22 PM »

Wow great video!! Thanks for the review. I can’t wait to get mine.

Rat Sniper (AKA: PaulT58) · « **Reply #628 on:** December 09, 2018, 11:20:43 PM »

Great video! I really like the detail you went in to on the regulator adjustment and shimmingbof the hammer spring. I feel confident enough to take on that project now! Thanks again.

Hawkeye51 · « **Reply #629 on:** December 10, 2018, 12:38:41 AM »

Awesome job Steve, great video with detailed narrative. This is ground zero for "the mod squad" to jump in. I share your perspective in that a tweek to the regulator setting and a bump to the hammer spring is enough to satisf me for now, not withstanding, Ray's moderator install is a given. What an excellent platform to work from. They had me at the double o-rings on the pellet probe, and an incredible price as well.

If they come out with a 25 bull pup, at a comperable price........ Look out........ Going to be a avalanche of orders.

Fwawa20 · « **Reply #630 on:** December 10, 2018, 01:08:16 AM »

Stephen- Great review on the Liberty. I subscribed and look forward to watching future videos. I haven’t done the baffle mod yet but it looks like that’ll be on my list. Going to see if I can find a lighter trigger spring as well with a longer screw for the second stage travel.

chouby4 · « **Reply #631 on:** December 10, 2018, 01:37:49 AM »

Stephen-Great review/tear down video. This will save me a lot of headaches, and time when I adjust the power on my Liberty. Thanks

cosmic · « **Reply #632 on:** December 10, 2018, 01:43:06 AM »

Thanks Steve !! You answered everything I asked you !! Now we need someone to stone the sear surfaces and find a lighter spring for the trigger.. I have a few Nielsen 15.5 gr. slugs to try.. ( .177 ) Thanks and I hope your are thawed out by now !!
Ray
By the way I called Crosman on Friday and ordered a baffle and the total was $6.05

Lastdog · « **Reply #633 on:** December 10, 2018, 09:38:45 AM »

Thanks Steve great review and super info. I agree with you that this gun is a fantastic value and has all a shooter needs. Again thanks

superchikn · « **Reply #634 on:** December 10, 2018, 10:13:07 AM »

Mine came with a pretty heavy trigger which I have only made minor improvements on so far. I have not been able to put much time into it yet though. Mine came with all screws turned all the way in and the spring screw turned all the way out. I put a lighter spring in and it did not make much of a difference on mine. I installed a longer screw at the front and polished the top of the sear where the rear screw contacts it. That definitely got rid of the grittiness. Out of the box mine was a heavy single stage that broke crisply. Too heavy though. It may have lightened up a bit. I have ordered some set screws with ball ends (there is a ball in the end and no spring) to replace the ones in it now. There is also a hole with a very short set screw in it at the back edge of the trigger blade. It is upside down and the blade needs to be removed to get it out. I wonder if a set screw in there in conjunction with the one next to it would create a second stage. I think that by itself it would make the trigger heavier byt I will try it out.

https://www.mcmaster.com/catalog/124/3154 #93339A124 4.98

cosmic · « **Reply #635 on:** December 10, 2018, 05:16:41 PM »

FYI I have Captain O Ring working on a set for the Liberty...

USAFANG6799 · « **Reply #636 on:** December 10, 2018, 05:40:36 PM »

Quote from: cosmic on December 10, 2018, 05:16:41 PM

FYI I have Captain O Ring working on a set for the Liberty...

FANTASTIC!

Many thanks!

superchikn · « **Reply #637 on:** December 10, 2018, 05:50:50 PM »

Quote from: cosmic on December 10, 2018, 05:16:41 PM

FYI I have Captain O Ring working on a set for the Liberty...

What did you do send him your gun?

I only heard of him recently. about an hour away.

cosmic · « **Reply #638 on:** December 10, 2018, 05:54:58 PM »

Took the sizes off the diagrams supplied by ATI..

Rohmpm · « **Reply #639 on:** December 10, 2018, 05:59:49 PM »

Outstanding video! Has anyone opened up the transfer ports on the high side of the valve and the barrel. It would seem reasonable that if you could make it more efficient on that side you could lower the regulato setting for more shots, same velocity. If not, guess I'll be my own guinea pig.

Thank you to our advertisers!

Any US importers carrying this gun?

Author Topic: Any US importers carrying this gun? (Read 151538 times - 8 votes) )

Author Topic: Any US importers carrying this gun? (Read 151538 times - 8 votes)
)