Author Topic: Any US importers carrying this gun? (Read 151407 times - 8 votes)
)

tracker1955 · « **Reply #400 on:** November 28, 2018, 09:23:22 PM »

Seeing some of you who ordered just before I did get shipping notifications got me all excited, until I checked my email again and found nada. UUUHHHHH.... maybe tomorrow, but if not I guess I'll have to get on the phone and find out what's happening.

Fwawa20 · « **Reply #401 on:** November 28, 2018, 09:47:05 PM »

Pat- there is a spring that looks like it could be swapped out for a lighter spring. It is located on the screw that you have taken out and removed for another. That original spring had a small washer attached to hold the spring in place on the screw. Being that you removed yours I bet it has fell somewhere in the trigger pack. If you look at the diagram in the manual you can see the spring I speak of. I plan on trying to find a lighter gauge spring and trying it out at some point. Right now I’am just trying to get my velocity where I want.

Fwawa20 · « **Reply #402 on:** November 28, 2018, 09:53:11 PM »

Pat- sorry I just realized you said you removed screw C. Screw C has nothing under it really. Screw b has the spring that is being compressed. Screw C is supposed to adjust travel in the first stage.

pat585 · « **Reply #403 on:** November 28, 2018, 10:04:33 PM »

Yea in the manual it looks like a spring in screw B. There is nothing rattling around although it could be wedged in there.I think it just got left out at the factory but i'll check. Screw B is the one i fully removed that didn't have any spring with it & made no difference to trigger pull. So i put a longer screw in C. My pull is 1 lb but with no safety?

smythsg · « **Reply #404 on:** November 28, 2018, 10:04:55 PM »

Got my shipping notice today, rifle to be delivered on Friday (.22 Synthetic stock) Really looking forward to this one.

pat585 · « **Reply #405 on:** November 28, 2018, 10:09:19 PM »

Steve make sure you give it a good cleaning. These barrels are full of gunk!!

SoCalZac · « **Reply #406 on:** November 28, 2018, 11:52:29 PM »

I ordered a synthetic stock .22 on Sunday. No shipping notice yet but I’m sure it’s either shipped or will be tomorrow. It looks like it is sold as the alpha overseas. Here’s a nice review I found of it

Edit: I just got the shipping notice it should be here Saturday!! 🎊👍

superchikn · « **Reply #407 on:** November 29, 2018, 12:29:49 PM »

Ordered mine late Monday and just got shipping notification. Wahoo!

pat585 · « **Reply #408 on:** November 29, 2018, 01:54:04 PM »

Thought i would be shooting my .177 by now! My mail comes everyday at 10:00 & now that i'm waiting for my Nova it's 1:00 & no mailman!! It's like they know when your waiting for something!!!

cosmic · « **Reply #409 on:** November 29, 2018, 01:54:42 PM »

Just wondering how to remove the shroud so I can clean the barrel ? I know to remove the stock, but do I losen the bands screws and the shroud screw ?

pat585 · « **Reply #410 on:** November 29, 2018, 01:59:11 PM »

Ray- Loosen the band screw & take out that little shroud screw. I spray a little silicone on the shroud so it doesn't get scratched up when sliding it through the band clamp.

superchikn · « **Reply #411 on:** November 29, 2018, 02:35:03 PM »

Quote from: pat585 on November 29, 2018, 01:54:04 PM

Thought i would be shooting my .177 by now! My mail comes everyday at 10:00 & now that i'm waiting for my Nova it's 1:00 & no mailman!! It's like they know when your waiting for something!!!

Yeah I got mine sent to work to keep it under the radar, tracking says it will be on Saturday which means I will not see it until Monday.

Rat Sniper (AKA: PaulT58) · « **Reply #412 on:** November 29, 2018, 05:01:22 PM »

Mine arrived today. I shot 3 magazines through it and then cleaned the barrel with Goo Gone. The CPUM's are all over the place. H&N Sniper Mediums did the best, but still not as tight as I'd like. I also tried the Air Arms Diabolo Field pellets. They were better than the CPUM's but not by much. All told I shot 5-6 full magazines through it and still had over 2000 psi of air left, so shot count is great. I have not put it over the crony, so I have no numbers. I filled it to 4000 psi and will let it sit till tomorrow to see if it's losing any air.

It seems everyone here was really impressed with the accuracy of these rifles. At this point, I'm not. In fact I put the scope I previously erode on my DAR25 and it took 2-3 complete revolution of the height and windage adjustments to get it on the target. This seems way excessive to me. This weekend I have to have some free time to really scrub the barrel and see if that improves things any. Hopefully it will improve as I shoot more pellets through it, but at this point, I'm a bit disappointed.

cosmic · « **Reply #413 on:** November 29, 2018, 05:02:08 PM »

What size are the trigger screws ? I like a single stage trigger...

Fwawa20 · « **Reply #414 on:** November 29, 2018, 05:47:08 PM »

Quote from: PaulT58 on November 29, 2018, 05:01:22 PM

Mine arrived today. I shot 3 magazines through it and then cleaned the barrel with Goo Gone. The CPUM's are all over the place. H&N Sniper Mediums did the best, but still not as tight as I'd like. I also tried the Air Arms Diabolo Field pellets. They were better than the CPUM's but not by much. All told I shot 5-6 full magazines through it and still had over 2000 psi of air left, so shot count is great. I have not put it over the crony, so I have no numbers. I filled it to 4000 psi and will let it sit till tomorrow to see if it's losing any air.

It seems everyone here was really impressed with the accuracy of these rifles. At this point, I'm not. In fact I put the scope I previously erode on my DAR25 and it took 2-3 complete revolution of the height and windage adjustments to get it on the target. This seems way excessive to me. This weekend I have to have some free time to really scrub the barrel and see if that improves things any. Hopefully it will improve as I shoot more pellets through it, but at this point, I'm a bit disappointed.

Paul-Which caliber did you buy? My .22 loves jsb 18.13 gr but also like H&N baracuda hunters as well.

Rat Sniper (AKA: PaulT58) · « **Reply #415 on:** November 29, 2018, 05:47:15 PM »

For anyone who is interested, I measured the magazine from these Liberty's and compared them to the Gauntlet and Marauder magazines. They are essentially identical. I also tested fitted a .22 Gauntlet mag and .22 Marauder mag in my .177 Liberty. The Gauntlet mags seems to fit better than the Marauder mags. The Marauder mags fit a bit loose and felt sloppy where the gauntlet mag snapped in place just like the Liberty mags do.

This is actually good news because the Gauntlet mags are generally cheaper than the Marauder mags. Obviously I couldn't test the actual functionality of the mags since all I have are the .22 mags for the Marauder and Gauntlet, but I did order a couple .177 Gauntlet mags from Amazon, so I'll know for sure when they arrive.

The .177 Gauntlet mags are $9.99 on Amazon:

pat585 · « **Reply #416 on:** November 29, 2018, 05:52:53 PM »

Paul -Is yours wood or synthetic? And have you taken it apart at all?

Rat Sniper (AKA: PaulT58) · « **Reply #417 on:** November 29, 2018, 05:52:59 PM »

Quote from: Fwawa20 on November 29, 2018, 05:47:08 PM

Quote from: PaulT58 on November 29, 2018, 05:01:22 PM
Mine arrived today. I shot 3 magazines through it and then cleaned the barrel with Goo Gone. The CPUM's are all over the place. H&N Sniper Mediums did the best, but still not as tight as I'd like. I also tried the Air Arms Diabolo Field pellets. They were better than the CPUM's but not by much. All told I shot 5-6 full magazines through it and still had over 2000 psi of air left, so shot count is great. I have not put it over the crony, so I have no numbers. I filled it to 4000 psi and will let it sit till tomorrow to see if it's losing any air.

It seems everyone here was really impressed with the accuracy of these rifles. At this point, I'm not. In fact I put the scope I previously erode on my DAR25 and it took 2-3 complete revolution of the height and windage adjustments to get it on the target. This seems way excessive to me. This weekend I have to have some free time to really scrub the barrel and see if that improves things any. Hopefully it will improve as I shoot more pellets through it, but at this point, I'm a bit disappointed.

Paul-Which caliber did you buy? My .22 loves jsb 18.13 gr but also like H&N baracuda hunters as well.

I got it in .177, with the wood stock. The stock is beautiful! I'll be testing more pellets in it this weekend. I did a really quick cleaning of the barrel with just Goo Gone and some patches. I'll use bore scrub and a better follow-up cleaner this weekend and see if that helps. I completely removed the barrel from the rifle and the shroud to clean it, it was too hard trying to hit that small bore that's sunk so far back in the shroud.

Also, which screws/bolts do you remove to remove the stock? I see 3 black hex head bolts and one silver flat head screw on the bottom of the stock? You can't get to the shroud retainer screw without removing either the stock or the barrel. Removing the barrels was a bit more obvious, so I went that route!

pat585 · « **Reply #418 on:** November 29, 2018, 06:07:31 PM »

I leave that small shroud screw off because like you said you have to remove the stock to get to it. The shroud /cylinder bracket holds the shroud firmly when tightened. The silver flat head screw should be marked somehow as that screw is your cylinder degasser. I can see someone thinking that screw removes the stock & getting a surprise. I would clean the barrel very good & make sure all the screws are tight & try again.

MB · « **Reply #419 on:** November 29, 2018, 06:14:51 PM »

Hi All,

In trying to understand the video in Urdu/ Hindi I though the reviewer was implying that the regulator/ plenum that sticks down from the breech assembly could be used for either putting a pressure gauge to show reg pressure or a reg with pressure gauge not sure yet- Bonus...I was partially right, I took the initiative to ask please see attached from factory...Videos and documentation on strip down and modification are in progress at factory and hopefully will be ready soon...

Thank you to our advertisers!

Any US importers carrying this gun?

Author Topic: Any US importers carrying this gun? (Read 151407 times - 8 votes) )

Author Topic: Any US importers carrying this gun? (Read 151407 times - 8 votes)
)