Any US importers carrying this gun?

[VaporTrail]

Well this just muddied the water even more. 

I thought I was set on a low-priced bulldog or a used Sumatra carbine...perhaps even a .25 Flash. Now this little gem shows up?

I'm curious about what pellet they used to get the 900FPS rating as well. Please, please...no "with PBA ammo" gimmicks. I'd really like a legit 950+ lead pellet rifle. Nice and short with decent weight, which the Sumatra and the Flash have. And apparently this one has it too.

As if my decisions weren't hard enough as it is. My wallet...it's weeping. 

[skorec]

Do you now someone about air pressure adjusting  ?
What is written inside manual about air pressure adjusting   ?
Is it  possible to adjust it  from 80 to 220 bar  or

No one is  experienced  with adjusting of air pressure set screw between the barrel and air reservoir ?

[Chester]

Skorec: search for it here on GTA and see Motorheads instructions. I remember him writing about it.

[skorec]

I have not found out yet anything about  adjusting air pressure at Nova Vista alpha  . I have just found out some nice info for adjusting hammer spring preloading on freedom multi-pump version. I believe that it is also able to do the same way at/on  not multi-pump   version.

I put it here
https://hardairmagazine.com/reviews/power-tuning-nova-freedom-air-rifle/

[Dairyboy]

I don't think anyone here has one yet. It will take time before people learn the adjustments. I believe only Back_Roads has one and that was a complete accident.

[MB]

Well this just muddied the water even more. 

I thought I was set on a low-priced bulldog or a used Sumatra carbine...perhaps even a .25 Flash. Now this little gem shows up?

I'm curious about what pellet they used to get the 900FPS rating as well. Please, please...no "with PBA ammo" gimmicks. I'd really like a legit 950+ lead pellet rifle. Nice and short with decent weight, which the Sumatra and the Flash have. And apparently this one has it too.

As if my decisions weren't hard enough as it is. My wallet...it's weeping. 

I believe from watching some online videos in foreign languages both JSB 18.13 and Barracuda Match 21 Grain were in the 900's

[Rat Sniper (AKA: PaulT58)]

Subscribed...  This look promising!

[tracker1955]

Ya Paul, I'm watching it too, looks to be built better from the start than the DAR was.

[VaporTrail]

Well this just muddied the water even more. 

I thought I was set on a low-priced bulldog or a used Sumatra carbine...perhaps even a .25 Flash. Now this little gem shows up?

I'm curious about what pellet they used to get the 900FPS rating as well. Please, please...no "with PBA ammo" gimmicks. I'd really like a legit 950+ lead pellet rifle. Nice and short with decent weight, which the Sumatra and the Flash have. And apparently this one has it too.

As if my decisions weren't hard enough as it is. My wallet...it's weeping. 

I believe from watching some online videos in foreign languages both JSB 18.13 and Barracuda Match 21 Grain were in the 900's

 

21gr at 900's? That's hovering near 38 FPE. She's a right-out-of-the-box thumper! I feel sorry for all your squirrels, rabbits, groundhogs and raccoons...they're going to get thrashed. Too bad I don't have those here.

Well...guess another gun is on the list. 

[gendoc]

Ya Paul, I'm watching it too, looks to be built better from the start than the DAR was.

yes, this is interesting to me also....

[Fwawa20]

I was told my order would ship today. So I hope it happens. Really wanted to get a scope on it and take it to the farm next Wednesday but looks like I’ll be pushing it. Plus it’ll take time to settle the regulator I’am told. Never had a gun with one so I wouldn’t know except from what I watch and read. Should be fun even if it’s half the gun I’am thinking it is.

[Lastdog]

We are hoping you are happily surprised and it is what we have been waiting for.

[tracker1955]

Even before the regulator gets settled in, the extreme spread probably won't be any worse than an unregulated gun would be.

[USAFANG6799]

Even before the regulator gets settled in, the extreme spread probably won't be any worse than an unregulated gun would be.

+1

[pat585]

Hi ALL - I saw the post on this rifle last week, it has all the features i like so i called american tactical last friday & talked with jennifer & had it by monday. I guess i got lucky because i see some of you are still waiting for yours. The wait will be worth it. The gun is called the nova liberty. I have the synthetic model that was $299.00 & $8.50 shipped to N.Y. Although i have been shooting pcp's about 2yrs i am a new be as far as working on them goes. I can tell you what i know so far-  It has a 300 bar reservoir, regulator, hi/low switch shrouded barrel with no baffles,mine has adj fiber optic sights that i removed and weighs just 6.5 lbs. I have only put about 100 rounds through it but it's a tack driver with chp 14.3. I get between 726-731 fps on low and 888-907 fps on high with 20 shots for each setting. The fit & finish is above average on mine. Really can't find one negative thing so far except the trigger which on mine was 4 lbs. The best i could get it down to is 3 lb 13 oz. It is 2 stage with a nice first stage that hits a hard second stage but has no creep so i am sure someone who knows triggers will be able to get it manageable. Surprisingly even with the hard pull i am getting 1/4 groups at 20 yards (basement range). My biggest problem with it is i can't remove the action from the stock! The synthetic stock is molded on the forearm up around the air cylinder so after removing the trigger guard screw, 2 screws on the side & the front swivel stud it still would not budge. I think after degassing the cylinder & removing it then the action will come out? There are 2 o rings on the bolt probe & they give you 2 spares. I also got 2 marauder style mags with an aluminum single shot tray & a stainless steel fill probe. O yea i almost forgot that there is a screw on the bottom of the stock that degasses the rifle--Even easier then on my hatsans. The you tube  video says the cylinder is titanium but i can't verify that. I wrote jennifer about the stock removal & she said she would look into it & get back to me. I am sure once this gun gets into more talented hands this will be a winner. I can see 250 -300 shots on low power with a good tuning. Either way you wont be dissapointed with it. CYA 

[Fwawa20]

Hi ALL - I saw the post on this rifle last week, it has all the features i like so i called american tactical last friday & talked with jennifer & had it by monday. I guess i got lucky because i see some of you are still waiting for yours. The wait will be worth it. The gun is called the nova liberty. I have the synthetic model that was $299.00 & $8.50 shipped to N.Y. Although i have been shooting pcp's about 2yrs i am a new be as far as working on them goes. I can tell you what i know so far-  It has a 300 bar reservoir, regulator, hi/low switch shrouded barrel with no baffles,mine has adj fiber optic sights that i removed and weighs just 6.5 lbs. I have only put about 100 rounds through it but it's a tack driver with chp 14.3. I get between 726-731 fps on low and 888-907 fps on high with 20 shots for each setting. The fit & finish is above average on mine. Really can't find one negative thing so far except the trigger which on mine was 4 lbs. The best i could get it down to is 3 lb 13 oz. It is 2 stage with a nice first stage that hits a hard second stage but has no creep so i am sure someone who knows triggers will be able to get it manageable. Surprisingly even with the hard pull i am getting 1/4 groups at 20 yards (basement range). My biggest problem with it is i can't remove the action from the stock! The synthetic stock is molded on the forearm up around the air cylinder so after removing the trigger guard screw, 2 screws on the side & the front swivel stud it still would not budge. I think after degassing the cylinder & removing it then the action will come out? There are 2 o rings on the bolt probe & they give you 2 spares. I also got 2 marauder style mags with an aluminum single shot tray & a stainless steel fill probe. O yea i almost forgot that there is a screw on the bottom of the stock that degasses the rifle--Even easier then on my hatsans. The you tube  video says the cylinder is titanium but i can't verify that. I wrote jennifer about the stock removal & she said she would look into it & get back to me. I am sure once this gun gets into more talented hands this will be a winner. I can see 250 -300 shots on low power with a good tuning. Either way you wont be dissapointed with it. CYA 

Thanks for the update. I have been waiting since last Wednesday and I’m in the next state over🤔. I too would like to see what the tuners will be able to get out of these. Hoping to learn myself.

[Dairyboy]

These come with open sights???

[Lastdog]

Just checked American Tactical’s web site and the have them listed.

[pat585]

Mine came with real nice adj fiber optic sights but not sure if they all do. When i was talking to jennifer she never mentioned open sights & said it came with only 1 mag- mine came with 2! I can see where open sights would come in handy but i just shoot targets  for groups. Another thing i forgot to mention is i clean my barrels from the breech so i removed the barrel with the 3 screws on top. The shroud doesn't thread into the breech but on a collar that is held on with another screw onto the barrel & there is a hole in the shroud that screws into the collar.  There is also a collar with 2 o rings midway down the barrel to keep the shroud centered. My barrel was full of the china goop but as i was cleaning it i noticed it has the tightest bore i have seen. It was an effort to get patches through it. This could be were the good accuracy is coming from?

[skorec]

Pat,
Thanks fo sharing info.

Did you notice screw between barrel shroud and air cylinder locking from front side ?
What is written at manual about it ?

Can you share some scans from user manual ?

Thanks before