Ar6 barrel

[unerstile]

Hello, i have an AR6 Evanix and im interested in switching the barrel, is that possible? any sudjestions?
Thanks

[only1harry]

Switch it to what?  Someone from the PCP gate might have replaced it.  Moved your post there.  The American/Chinese/Korean gates are for Springers only. 

Good luck.

Harry

[oldpro]

Why do you want to switch it?

[KnifeMaker]

Yes, knowing what you are trying to accomplish would help here. 


Knife

[Nomadic Pirate]

Getting a bew barrel on an AR6 would be a piece of cake since there's no transfer port nor O-ring,

just need to turn any barrel blank to fit the reciever,... that reminds me, I want a .25 and .30 AR6 badly

[rkr]

Getting a bew barrel on an AR6 would be a piece of cake since there's no transfer port nor O-ring,

just need to turn any barrel blank to fit the reciever,... that reminds me, I want a .25 and .30 AR6 badly

The barrel is threaded in to the breech (quite rare in airguns) so you need someone with a lathe to make it fit.

[Nomadic Pirate]

Getting a bew barrel on an AR6 would be a piece of cake since there's no transfer port nor O-ring,

just need to turn any barrel blank to fit the reciever,... that reminds me, I want a .25 and .30 AR6 badly

The barrel is threaded in to the breech (quite rare in airguns) so you need someone with a lathe to make it fit.

Well yeah, need it to turn the barrel down too,
best way to mount a barrel screwed into the reciever, the advantage of not having a transfer port.

[fritzalee]

I have an older AR-6 RIFLE .22, HAD A CROSMAN 24" barrel turned down to fit the receiver, grub screws holding it in, didn't work worth a darn, bought a new barrel from ARS, Davis might still have some parts available?