What airgun related did you do today?

[Matchstickshooter]

 Some parts came in, and I put together a Daisy 880!

[Tater]

Me and my wife shot my 2240 of the porch today. I put some honey and peanut butter on the target, but no wasps got on it.
She "accidentally" called to 2240 "her pistol". Ummmm.... no.

[Matchstickshooter]

Some parts came in, and I put together a Daisy 880!

Sept.06 Daisy wearing new clothing!

 

[bReTt]

Some parts came in, and I put together a Daisy 880!

Sept.06 Daisy wearing new clothing!

 

Bring back the pirate version!

[sekiar]

Spent three hours enjoying my new Beeman 2027 pistol with an antique Weaver 4 power scope!  Low cost guns can be very pleasing and a great way to spent the afternoon!  Charles

[Matchstickshooter]

Some parts came in, and I put together a Daisy 880!

Sept.06 Daisy wearing new clothing!

 

Bring back the pirate version!

It no longer exists.  Metal receiver and lever became this....

[airgunaut]

Have you shot it yet? 🥁🤗

[Matchstickshooter]

Have you shot it yet? 🥁🤗

The one I just fixed up hadn't been shot in a while. Started out fine, then power went down, and now back up again.
 May have to do seals at some point.
 The older metal/metal one works great.

[2A Georgia]

Using painters tape, balsa wood and coins I taped up and offset the pp800r to get ready to mold Kydex around it.

 Very nice! Look forward to seeing the finished product.
Does it take a lot of special equipment to do the molding?

I have a gerrymander setup with existing "padding" and wood clamps.  I use a Goodwill Toaster Over.  I use painter's tape and don't own any dummy/mold guns.  So for me no special equip, just stuff I have in the mancave/garage.  Pictures coming soon once I get some bench time.  Been on the road for work training lately. I had a PB that Holster's aren't made for...then I made my son one for his PB, then I made a holster for my mini-machette (aka Rambo Knife)....and here we are further down that rabbit hole...lol

Finished the Drop Leg/Offset Holster for the pp800r today.

[2A Georgia]

Hand sewing velcro on the front bag for run-n-gun days

[Zsigmund]

Using painters tape, balsa wood and coins I taped up and offset the pp800r to get ready to mold Kydex around it.

 Very nice! Look forward to seeing the finished product.
Does it take a lot of special equipment to do the molding?

I have a gerrymander setup with existing "padding" and wood clamps.  I use a Goodwill Toaster Over.  I use painter's tape and don't own any dummy/mold guns.  So for me no special equip, just stuff I have in the mancave/garage.  Pictures coming soon once I get some bench time.  Been on the road for work training lately. I had a PB that Holster's aren't made for...then I made my son one for his PB, then I made a holster for my mini-machette (aka Rambo Knife)....and here we are further down that rabbit hole...lol

Finished the Drop Leg/Offset Holster for the pp800r today.

 Wow that looks great! I'd really like to do a holster for my pp700 someday. 

[avator]

I may have brought a couple new members to the airgun world. When Betty Lou's sister and bil brought her back from Ohio I gave him a new Beeman P17 pistol and a tin of Norma pellets. Yesterday the told Betty Lou that they've almost shot the whole tin already and they love it. I probably should have given them 2 because Karen says she has to beg Kenny to let her shoot. They were both very interested in all the airgun related stuff we do around here.
They own a remodeling company and can probably afford the higher end airgun toys. They live on 5 or so acres in the country south of Columbus so they have plenty or room to shoot. They also have a creek that runs through their property. Sounds very airgun friendly.
They have a newly remodeled cabin on the property and we are planning a trip up in the spring to attend a memorial for Betty Lou's momma that recently passed. Betty Lou and I will stay in the cabin so I'll be taking some airguns with us.

[splitbeing]

P17... good call!  It's a good feeling, sharing airgun goodness with others.

One afternoon visiting a friend in Ohio, Brooke and I sat shooting a p17 with my buddy and his son for a couple hours.  We had time to kill. They also caught a bit of the airgun bug. I've given them a colt co2 with shells and my 125 sniper with a bunch of jsb. When I'm around, we generally sit around and shoot at some point.  Real good, relaxed vibes.

[avator]

I got the 2nd and 3rd Big Air .22 Sentry mags in the mail and they fit & function just as good as the prototype I tested for Troy. Looks like I need to get busy casting those pellets.   

[avator]

Just cast up a couple hundred NOE 217 24 RF magnums and they're in the tumbler now. I'll let them run 20 minutes or so then I'll weigh and cull them. With the long pins they typically drop around 22.60ish. I cull them out at 22.50 - 22.70 and most of my 22 guns shoot them good. The Sentry happens to favor them very well.. at least as good as any I've bought.

[Novagun]

Fixed the open sights on my Umarex. You know how it goes . If it's not broken, fix it till it is.

[2A Georgia]

Using painters tape, balsa wood and coins I taped up and offset the pp800r to get ready to mold Kydex around it.

 Very nice! Look forward to seeing the finished product.
Does it take a lot of special equipment to do the molding?

I have a gerrymander setup with existing "padding" and wood clamps.  I use a Goodwill Toaster Over.  I use painter's tape and don't own any dummy/mold guns.  So for me no special equip, just stuff I have in the mancave/garage.  Pictures coming soon once I get some bench time.  Been on the road for work training lately. I had a PB that Holster's aren't made for...then I made my son one for his PB, then I made a holster for my mini-machette (aka Rambo Knife)....and here we are further down that rabbit hole...lol

Finished the Drop Leg/Offset Holster for the pp800r today.

 Wow that looks great! I'd really like to do a holster for my pp700 someday. 

Many thanks!  And you reminded me the pp700 is still on the "collection list."
I need to test it on a long walk and with the safety harness and my climbing stand.....and down the rabbit hole I go... :-)

[2A Georgia]

Took the scope off the Notos, leveled it up in a vise, re-leveled the CP 3-12X32AO and zeroed in with some H&N 14.66.  Too dark for chrono as I was shooting with the solar powered night range but I would guess around 875fps for those so hopeful for a flat trajectory from 20-40 yards...time will tell

[Back_Roads]

 Tested the Big Air Custom mags, in one of my Sentrys, the other needs the scope raised 1/8th inch, I also was sent a Notos mag, that fits and works great in my Notos. Thanks Troy !

[Zsigmund]

Using painters tape, balsa wood and coins I taped up and offset the pp800r to get ready to mold Kydex around it.

 Very nice! Look forward to seeing the finished product.
Does it take a lot of special equipment to do the molding?

I have a gerrymander setup with existing "padding" and wood clamps.  I use a Goodwill Toaster Over.  I use painter's tape and don't own any dummy/mold guns.  So for me no special equip, just stuff I have in the mancave/garage.  Pictures coming soon once I get some bench time.  Been on the road for work training lately. I had a PB that Holster's aren't made for...then I made my son one for his PB, then I made a holster for my mini-machette (aka Rambo Knife)....and here we are further down that rabbit hole...lol

Finished the Drop Leg/Offset Holster for the pp800r today.

 Wow that looks great! I'd really like to do a holster for my pp700 someday. 

Many thanks!  And you reminded me the pp700 is still on the "collection list."
I need to test it on a long walk and with the safety harness and my climbing stand.....and down the rabbit hole I go... :-)

 I'm on the other side of the coin, have the pp700 and want the pp800r also! I've had it in my shopping cart on Krale about 50 times and chickened out lol.
Have fun, and good luck!