Author Topic: What airgun related did you do today? (Read 432476 times - 5 votes)
)

Arch_E · « **Reply #980 on:** May 03, 2019, 08:32:43 PM »

[/quote]

Cycles well, trigger feels good, fps is okay, but I cant group within 3 inches at 30 yards! One shot bullseye, next shot 2"" up an right, next shot bulls eye, next shot 1" down and left. I ran it over the chrony today and it was pretty consistent in the mid 740's.

And yes I checked the screws

[/quote]

How many pellets have you put through it (for break in)?

bantam5s · « **Reply #981 on:** May 03, 2019, 09:14:24 PM »

The bolt handle of the 1300kt is kind of small, so I decided to make a longer one for American boy.
A screw , some Steel stik putty, and some paint was all it took.

Hoosier Daddy · « **Reply #982 on:** May 03, 2019, 10:26:26 PM »

I finally had a quiet night alone with no chores to do.

So I took it upon myself to assemble the long overdue 2060 project.
At the end I put a CO2 cart in and gave her a few test dry fires.
DANG this baby shoots hard... but I bet is gonna be a gas hog!
I shot 5 dry fires and laid it to rest to see how it holds its charge in the morning.

Piranhaboy · « **Reply #983 on:** May 03, 2019, 11:00:53 PM »

Been playing around with my new 2289 bugout I got as a birthday present. Definitely digging the laser etched tube. Looks much cleaner.

Tom Tucker · « **Reply #984 on:** May 05, 2019, 05:41:02 PM »

Touched up all my guns that needed it with Oxpho-Blue. Triggers, roll pins, screws... all back to black

Wayne52 · « **Reply #985 on:** May 05, 2019, 06:14:51 PM »

I did a woods walk this morning, got a red squirrel and two chippers.

bear air · « **Reply #986 on:** May 05, 2019, 06:42:21 PM »

Obsessed on a .177 marauder build. Shot a squirrel and boxed up an air gun to ship out.

UlteriorModem · « **Reply #987 on:** May 05, 2019, 09:08:02 PM »

Was such a nice day out I brought out almost all my rifles to run them over the Chrony.

4 guns

2 break barrels, two pcp. All performed very well. It was a lot of fun! Trying all the different types and platforms. So much to learn!

Benji Titan NP
Benji Mayhem SBD NP2
Seneca Aspen
Umarex Gauntlet

Matchstickshooter · « **Reply #988 on:** May 06, 2019, 10:32:22 PM »

Worked on the trigger a bit,on the Crosman 3100.

fwbsport · « **Reply #989 on:** May 06, 2019, 10:36:18 PM »

Quote from: Matchstickshooter on May 06, 2019, 10:32:22 PM

Worked on the trigger a bit,on the Crosman 3100.

Haven't forgotten you Wendell!

I've been busy. Tomorrow your gun is getting all my attention!

Will pm tomorrow!

Gipper · « **Reply #990 on:** May 06, 2019, 10:40:15 PM »

Punched some holes with a new to me but older RAW HM1000. Wow what a rifle!!!

fwbsport · « **Reply #991 on:** May 06, 2019, 10:54:33 PM »

Quote from: Gipper on May 06, 2019, 10:40:15 PM

Punched some holes with a new to me but older RAW HM1000. Wow what a rifle!!!

Ha Ha Ha!

You took out everything you owned for that HM 1000 and left it as your only signature gun!
Hey, I'm happy with the HW30 and 50----I compared them with my two 50s and R7.

Gipper · « **Reply #992 on:** May 06, 2019, 11:42:49 PM »

Quote from: fwbsport on May 06, 2019, 10:54:33 PM

Quote from: Gipper on May 06, 2019, 10:40:15 PM
Punched some holes with a new to me but older RAW HM1000. Wow what a rifle!!!

Ha Ha Ha!

You took out everything you owned for that HM 1000 and left it as your only signature gun!
Hey, I'm happy with the HW30 and 50----I compared them with my two 50s and R7.

You noticed that did ya?!

Wayne52 · « **Reply #993 on:** May 07, 2019, 12:30:34 PM »

So far I've cast 448 19.6 grain pellets, topped of my SCBA tank and got all the pellets sorted (448 good ones and 26 rejects) my next project today will be trying to fix the pump on the non warranty Freedom I got today, it only pumps to 2K right now and hopefully when I tear it down and put it back together it's going to be pumping to 3600psi

Matchstickshooter · « **Reply #994 on:** May 07, 2019, 01:13:22 PM »

Quote from: fwbsport on May 06, 2019, 10:36:18 PM

Quote from: Matchstickshooter on May 06, 2019, 10:32:22 PM
Worked on the trigger a bit,on the Crosman 3100.

Haven't forgotten you Wendell!

I've been busy. Tomorrow your gun is getting all my attention!

Will pm tomorrow!

Okay

UlteriorModem · « **Reply #995 on:** May 07, 2019, 08:03:50 PM »

I managed a Duhr Hurr moment today

I received a brand new M17 semi auto replica in .177 today. Fun stuff! Could not wait to try it out.

I loaded up the magazine, put the Co2 in, set the magazine and pulled off about a dozen rounds into my pellet trap! Weeee

"Oh, wait, oh... sigh" The day before I had shot a really good score for the 30 yard rifle match. 198 out of 200. That target was still taped to the pellet trap. I had poured a dozen quick rounds out of the P17 into that target totally invalidating it!"

That's okay I ripped of the other 8 rounds into it, almost feel satisfied

As it turns out I shot the 30 yard match this afternoon and scored even better!

Insanity · « **Reply #996 on:** May 07, 2019, 09:41:28 PM »

Got this 3d printer kit in the mail today to print off air gun parts and other bits and bobs.

Edit: It helps if I include the picture...

uglymike · « **Reply #997 on:** May 07, 2019, 09:59:10 PM »

I switched around a couple scopes and mounts. Mounted a scope on a rifle yesterday and then decided this A.M. I wanted to go a different route with a 1 piece mount. Sooooo, 2 hours later I've got 2 rifles with different optics/mounts. Tomorrow morning I'll be @ my indoor range before daylight sighting them in.

35E got the Hawke Vantage 4X16, the wood stock 34 got the Airmax 4X12.

2L8 · « **Reply #998 on:** May 07, 2019, 11:11:57 PM »

...I did think about it, then I got busy, dang , I hate when that happens...Got plans though

Matchstickshooter · « **Reply #999 on:** May 08, 2019, 08:31:36 AM »

Quote from: Matchstickshooter on May 07, 2019, 01:13:22 PM

Quote from: fwbsport on May 06, 2019, 10:36:18 PM
Quote from: Matchstickshooter on May 06, 2019, 10:32:22 PM
Worked on the trigger a bit,on the Crosman 3100.

Haven't forgotten you Wendell!

I've been busy. Tomorrow your gun is getting all my attention!

Will pm tomorrow!

Okay

Thank you to our advertisers!

What airgun related did you do today?

Author Topic: What airgun related did you do today? (Read 432476 times - 5 votes) )

Author Topic: What airgun related did you do today? (Read 432476 times - 5 votes)
)