Author Topic: What airgun related did you do today? (Read 432589 times - 5 votes)
)

superchikn · « **Reply #1060 on:** May 15, 2019, 04:51:52 PM »

My micro taps showed up yesterday so I was able to tap the hole for the 2 mm retainer screw in the end of the power selector for my Liberty. The original is aluminum and I enlarged the passage which has caused some who have done the same to blow apart. My new shaft is steel with an aluminum head/wheel on it. All I have left to do is verify that is ti indexing correctly and drill the large and small passages at 90 degrees.

It is coming along well and will work perfectly and even looks great but sure is a lot of work on a drill press and a cross vise.
I NEED A LATHE! ... I NEED TO LEARN HOW TO USE A LATHE!

unionrdr · « **Reply #1061 on:** May 15, 2019, 06:28:18 PM »

Quote from: regularguy11B on May 14, 2019, 11:22:31 PM

Noooiiice unionrdr. How is the mrs dealing with all them airguns all over the place?

She spends money on her hobbies...I have mine. My son seems to no longer be interested in airgun hunting. Now back to music with a synth, typewriter, etc. So I put the stocks on my 760-C 1/89. Slight mod to the butt stock mount. and they look great!

Tom Tucker · « **Reply #1062 on:** May 22, 2019, 04:32:58 PM »

Scoped my 1300KT. First time I ever scoped anything.

Sfttailrdr46 · « **Reply #1063 on:** May 22, 2019, 05:18:03 PM »

Worked on my Freedom 8 rebuild a little more today finally found the HP leak that started this whole project. There is a little cap under the main Pump block that has a little o-ring under the cap

While removing the cap to replace the leaking o-ring the tiny cap went flying and entered missing part limbo. So now I have to wait for a new cap to arrive before I can determine if my rebuild worked or not. If I still do not have a working compressor after this I will just order a new Freedom 10 and use the 8 for spare parts

UlteriorModem · « **Reply #1064 on:** May 22, 2019, 05:31:28 PM »

Quote from: Sfttailrdr46 on May 22, 2019, 05:18:03 PM

Worked on my Freedom 8 rebuild a little more today finally found the HP leak that started this whole project. There is a little cap under the main Pump block that has a little o-ring under the cap While removing the cap to replace the leaking o-ring the tiny cap went flying and entered missing part limbo. So now I have to wait for a new cap to arrive before I can determine if my rebuild worked or not. If I still do not have a working compressor after this I will just order a new Freedom 10 and use the 8 for spare parts

Hate that kind of thing. Nothing worse than crawling around on your hands and knees searching for small parts. I have learned to put a towel down under what I am working on and 'maybe' the part wont go missing. Maybe.

Went out to practice with the Titan some this after noon and after 5 or 6 decent shots, along comes the rain

Seanh · « **Reply #1065 on:** May 22, 2019, 06:06:41 PM »

Shut my 300s today... Only thing I have working right now. A lot of fun, was shooting at my burned-out truck

bear air · « **Reply #1066 on:** May 22, 2019, 08:36:24 PM »

I'm going back a few days because I keep getting side tracked before I get a chance to post. I installed the RAW trigger blade in my marauder on Sat. I also did some testing with the new hades pellets. I went to Scheels and bought some cleaning patches and targets and a level that's not going to fit.

maraudinglizard · « **Reply #1067 on:** May 23, 2019, 08:24:32 AM »

Drooling over the new Umarex Ruger 10/22 replica offered by Pyramid Air. The agony of it all.

unionrdr · « **Reply #1068 on:** May 23, 2019, 10:06:55 AM »

Finally got the wood working done on the Hatsan 95 stock yesterday. Got the first coat of Tru-Oil on it. This is the second stock with flames/tiger stripes! And the Turkish walnut with those streaks through it is purty...

Mr. Panther · « **Reply #1069 on:** May 23, 2019, 11:58:56 AM »

Actually I did this last night, put a Simmons 3x9x50 scope on my 2260 PCP carbine. Mounted a bi-pod and swivels on my " by the door Disco" , and mounted an Optimus 3x9x32 on my old 760 that I put together from parts. a productive evening for me.

UlteriorModem · « **Reply #1070 on:** May 23, 2019, 12:42:36 PM »

Quote from: unionrdr on May 23, 2019, 10:06:55 AM

Finally got the wood working done on the Hatsan 95 stock yesterday. Got the first coat of Tru-Oil on it. This is the second stock with flames/tiger stripes! And the Turkish walnut with those streaks through it is purty...

Looks great! I wish I had that kind of skill.

bear air · « **Reply #1071 on:** May 24, 2019, 12:33:01 AM »

Worked 14 hrs to buy more airgun stuff lol.

Wayne52 · « **Reply #1072 on:** May 24, 2019, 12:42:03 AM »

I tested out my latest cast hollow point slugs and am very happy with the results. Shooting in 20-25mph winds was the ultimate test, I'll be doing a short video about it soon in the casting gate.

Hoosier Daddy · « **Reply #1073 on:** May 24, 2019, 09:08:12 AM »

Grand Daughter was uncomfortable breaking open her new XS-12 with the front hooded sight. So I took the open sights off and mounted one of the "Bulk Buy" Kruger 3-9x32 AO Mildot scopes I have for her.
Next time she is here we will see if I have the eye relief even remotely close to where she needs it.

unionrdr · « **Reply #1074 on:** May 24, 2019, 10:29:29 AM »

Quote from: UlteriorModem on May 23, 2019, 12:42:36 PM

Quote from: unionrdr on May 23, 2019, 10:06:55 AM
Finally got the wood working done on the Hatsan 95 stock yesterday. Got the first coat of Tru-Oil on it. This is the second stock with flames/tiger stripes! And the Turkish walnut with those streaks through it is purty...

Looks great! I wish I had that kind of skill.

Thanks. It's almost done and gonna get the 3rd coat today.

SteveP-52 · « **Reply #1075 on:** May 24, 2019, 12:26:05 PM »

The AirTact got scoped after finally getting the Hawke 30mm Weaver offset rings here and making a minor modification to the rail to make them fit how I wanted. The scope is a BSA Tactical 3-12x44 SF I grabbed on a one time deal last summer for $65. Now for some decent weather this weekend to sight it in.

unionrdr · « **Reply #1076 on:** May 24, 2019, 12:27:57 PM »

Cleaning up clutter in the man cave before I get to work on the Hatsan 95 stock to 1000x swap again. Then we can remodel the room some more. When we get all that done, I'll have my filming/picture taking spot back again!

bear air · « **Reply #1077 on:** May 24, 2019, 12:48:46 PM »

So far not much. Cleaned the barrel on my Stormrider. Been on and off GTA all morning since I got rained out again. Tasha is off work at noon so not going to start anything too time consuming.

avator · « **Reply #1078 on:** May 24, 2019, 12:51:21 PM »

Stay tuned..... shop time on the agenda.

Matchstickshooter · « **Reply #1079 on:** May 24, 2019, 04:38:02 PM »

My parts came for the Crosman 66.
Went from having a pellet clip feed back to an earlier one, but I'm happy,... won't have clips to worry about losing!!

Thank you to our advertisers!

What airgun related did you do today?

Author Topic: What airgun related did you do today? (Read 432589 times - 5 votes) )

Author Topic: What airgun related did you do today? (Read 432589 times - 5 votes)
)