Seneca Dragonfly .22 cal

[chwillbill68]

I picked up a .22 cal Dragonfly today at the Baldwinsville, NY air gun show today.  Been wanting a pumper to add to my collection.  Wondering if anybody has one and what pellets have worked best for you.  Also has anyone did any tweeking to it.  I would also love to add a suppressor to it.  I saw a guy at the show with a TKO suppressor on his Benj.  He said it just slides on the barrel and is held there with a allen screw.  Wondering if something like that would work on this gun and also my Crossman 180.

Thanks Bill C!

[xtred1]

I have one, I have a bug buster scope on it and a TKO to make it very quiet. Mine likes CPHPs, ( I dont use them as they pass right through the rats) and RWS Meisterkuglen  Those two are the best for me. I have not been shooting very far with mine yet. I have not had a chance to see what it does at 20yards.  Right now I have it setup for crosman destroyers as I am mainly shooting rats. The destroyers dont shoot as tight groups that the others do. (but they are usable)  I took my last rat at almost 8 yards with three pumps without a full pass through.  I removed the front and rear sights. The front to mount the TKO, the rear to get it out of the way. I use the rear sight mount as a place to push on while pumping.  I also found I can adjust the tirgger with the screw that holds the trigger guard on.  I am really liking the rifle.  It does get easier to pump.

Paulus

[chwillbill68]

I have one, I have a bug buster scope on it and a TKO to make it very quiet. Mine likes CPHPs, ( I dont use them as they pass right through the rats) and RWS Meisterkuglen  Those two are the best for me. I have not been shooting very far with mine yet. I have not had a chance to see what it does at 20yards.  Right now I have it setup for crosman destroyers as I am mainly shooting rats. The destroyers dont shoot as tight groups that the others do. (but they are usable)  I took my last rat at almost 8 yards with three pumps without a full pass through.  I removed the front and rear sights. The front to mount the TKO, the rear to get it out of the way. I use the rear sight mount as a place to push on while pumping.  I also found I can adjust the tirgger with the screw that holds the trigger guard on.  I am really liking the rifle.  It does get easier to pump.

Paulus

That’s the same scope I got to put on mine.  I will look for that screw for the trigger adjustment. Any tips on removing the front sight,  I tugged and tried twisting with a little force with no movement but I did not want to break anything. Is it just a tight fit?

Thanks Bill C!

[xtred1]

You have to heat up the front sight with a heat gun. Then you pull it straight off. Once it was heated it came of easy. If you order a TKO you must tell Mike it is for a Dragonfly. As the snow peak guns and Diana storm rider have a different size barrel on the end.  Since this photo was taken I took the rear sight off.

[chwillbill68]

You have to heat up the front sight with a heat gun. Then you pull it straight off. Once it was heated it came of easy. If you order a TKO you must tell Mike it is for a Dragonfly. As the snow peak guns and Diana storm rider have a different size barrel on the end.  Since this photo was taken I took the rear sight off.

 That's awesome!  Thank You Paulus!

[chwillbill68]

You have to heat up the front sight with a heat gun. Then you pull it straight off. Once it was heated it came of easy. If you order a TKO you must tell Mike it is for a Dragonfly. As the snow peak guns and Diana storm rider have a different size barrel on the end.  Since this photo was taken I took the rear sight off.

Paulus what was your barrel diameter,  mine was 12mm. 

[xtred1]

The main barrel is 12mm, but under the front sight it was stepped down to right at 11.75. So when I pulled the front sight a TKO cut for 12mm would not fit. 

[chwillbill68]

The main barrel is 12mm, but under the front sight it was stepped down to right at 11.75. So when I pulled the front sight a TKO cut for 12mm would not fit.

Ok I think I should recheck my measurement, I don't want to get the wrong size.

[Back_Roads]

 
Here is one offered from a seller on Ebay , I have one of their 1077 LDCs , and plan on getting one for the Dragonfly soon also.
https://www.ebay.com/itm/Seneca-dragonfly-LDC-artemis-pumper/183337301620?hash=item2aafc13674:g:jv8AAOSwvDpbDI7w

[chwillbill68]

Here is one offered from a seller on Ebay , I have one of their 1077 LDCs , and plan on getting one for the Dragonfly soon also.
https://www.ebay.com/itm/Seneca-dragonfly-LDC-artemis-pumper/183337301620?hash=item2aafc13674:g:jv8AAOSwvDpbDI7w

Thanks James!