Author Topic: Side lever repeater from Thailand....as of date (Read 4192 times))

Bentong · « **on:** July 24, 2018, 12:26:54 PM »

I guess he renamed if from trademark name to his...looks robust for the price.
https://www.ebay.com/itm/Side-Lever-Breeches-Crosman-Benjamin-Marauder-magazine-Multi-shot-Airgun-Loader/283069932774?hash=item41e84864e6:m:mLmvmIHrG2x4h_PRD1cXeqQ

Big Ken · « **Reply #1 on:** July 27, 2018, 01:27:41 PM »

Need one for .25 cal

Rob M · « **Reply #2 on:** July 27, 2018, 01:30:16 PM »

these look incredible.nicest breech ive seen for a crosman matter of fact

caveman · « **Reply #3 on:** July 27, 2018, 04:59:52 PM »

Yep me too so much I got one in blk otw, bet ya it grows up to be a .25 one day soon lol

45super · « **Reply #4 on:** July 29, 2018, 03:50:16 AM »

Is he claiming it fits 22xx and marauder, or marauder pistol?

caveman · « **Reply #5 on:** July 29, 2018, 05:59:18 AM »

Looks to me it will only fit a two bolt breech tube and cal is determined by what barrel and mag you have installed. I have a baker .25 bbl to fit crosman breech been laying around for a while so I ordered a mag airpower 15.5 tube, 60fpe valve, and one of his new hammers w/adjustable striker and thread in cocking pin. Gonna kinda be a prod in .25,,,,,,,,,,,,I hope.

Gipper · « **Reply #6 on:** July 29, 2018, 10:02:40 AM »

Quote from: 45super on July 29, 2018, 03:50:16 AM

Is he claiming it fits 22xx and marauder, or marauder pistol?

I think he is starting it uses marauder magazines not will fit one.

2K1TJ · « **Reply #7 on:** July 29, 2018, 05:10:28 PM »

Quote from: caveman on July 29, 2018, 05:59:18 AM

Looks to me it will only fit a two bolt breech tube and cal is determined by what barrel and mag you have installed. I have a baker .25 bbl to fit crosman breech been laying around for a while so I ordered a mag airpower 15.5 tube, 60fpe valve, and one of his new hammers w/adjustable striker and thread in cocking pin. Gonna kinda be a prod in .25,,,,,,,,,,,,I hope.

I'm pretty sure .25 mags are thicker and may be a little taller too.

YEMX · « **Reply #8 on:** July 29, 2018, 06:21:53 PM »

If the breech's from Thailand are similar to the one's from Russia, then this would be for a 22xx or Disco, using Mrod mags and barrel shroud stuff.

Quote from: 2K1TJ on July 29, 2018, 05:10:28 PM

I'm pretty sure .25 mags are thicker and may be a little taller too.

I sure hope there's not too much difference. I guess I'll find out soon-ish.

Artie · « **Reply #9 on:** July 29, 2018, 07:19:06 PM »

I believe the last post is correct. I recall Googling the breech and found the same seller. "Discovery" was in the description.

datilD · « **Reply #10 on:** July 29, 2018, 08:50:50 PM »

I'd like to see one mounted to a Discovery or Maximus tube. The thing that would keep me from buying such a cool breech is the lack of compatible barrel band. If he sold a 1" barrel band for the Disco, I would seriously consider this for a custom build.

caveman · « **Reply #11 on:** July 31, 2018, 02:02:49 PM »

Well it shipped today, cant wait to see how long it takes from Thailand on a slow boat lol

Geoff · « **Reply #12 on:** July 31, 2018, 05:56:37 PM »

they look nice .. 155$ is up there ... if i did not already have a BNM on the disco, i would be slightly tempted

thanks for the heads up

caveman · « **Reply #13 on:** August 11, 2018, 10:49:25 PM »

I got it today its made pretty well looks like I got to work out a few things to get the .25 bbl and mags to work together, "come on come on lets work together" canned heat, boggie assault 1969ish. I wouldn't want to make it for that amount of$. I will give it a good go round the am, but I think it will do what I want. A lot cheaper than the first one I saw on ebay. Cave

Wayne52 · « **Reply #14 on:** August 12, 2018, 05:35:06 AM »

As many others would probably agree Crosman needs a modern factory with the latest tech machinery and just build everything in house, the engineer's would have a field day if they had the opportunity.

Big Ken · « **Reply #15 on:** August 13, 2018, 11:12:06 PM »

Benjamin should start making them for the Benjamin Marauder Gen IIIs, it would be an awesome upgrade.

Bentong · « **Reply #16 on:** August 16, 2018, 09:42:42 AM »

More info on these breeches.......
https://www.facebook.com/theexclusiveshopairgun/

TF89 · « **Reply #17 on:** August 16, 2018, 08:07:43 PM »

To repeat what Derick said. Without a barrel band and/or TP port it would be hard justify. Unless I'm missing something?

Bentong · « **Reply #18 on:** August 17, 2018, 04:38:26 PM »

From the video.....looks like you can put any caliber barrel just need to machine it to the id of the barrel sleeve....also look more grip than gauntle to get if free float with no problem. Was gonna order it today but my dang home AC quit last night and for what i paid to get fixed....could have bought 2 breeches....o well😩

Gipper · « **Reply #19 on:** August 17, 2018, 05:58:10 PM »

Anyone with a 3d printer ans a few specs can produce the barrel band easy enough. I made one for my disco with 1/4" riser spacer and it worked great. Also looks like it comes with a transfer port.

Thank you to our advertisers!

Side lever repeater from Thailand....as of date

Author Topic: Side lever repeater from Thailand....as of date (Read 4192 times))