Lubing the T06Trigger

[rijo joseph]

Dear Friends, I would like to know what is the maintenance schedule for DianaT06 trigger, how often we need to lubricate it? and with what oil or grease we can use for this purpose? can we use Lubriplate No. 105 grease for smearing the mechanisms of the trigger?

please advice me how to proceed.

Rijo

[dimitri]

You don't need to.

[Mark 611]

If you want to take it apart to lube it use good Molly or spray it down with some teflon lube like {slick 50/lube 1} and if you do the tear down you might as well polish the sears while your at it!

[Rob Hawkins]

Once should be enough forever if you do it right. I use Maccari Eurolube or Molylube. Lubed for life.
I was told to lube a bearing every month in industry once. I asked why, it only moves a few feet a month and it has grease running out of it and dropping on the floor. The answer was because it says to. I asked if he had a front wheel drive car. Yes and it has over 200,000 miles on it. I asked if he ever greases the rear wheel bearings. No. Then why grease a bearing that moves three feet a month and not one that moves 2,000 miles a month?
HTH
Rob

[rijo joseph]

Friends, thanks for your advices...