Author Topic: Let's see your 3D printed parts/models/ideas (Read 48408 times))

oldpro · « **Reply #160 on:** April 19, 2020, 01:57:08 AM »

Very much thinking about getting this printer to go with my other to keep them company LOL

dan_house · « **Reply #161 on:** April 19, 2020, 02:46:45 AM »

Quote from: Scotchmo on April 17, 2020, 06:25:40 PM

Quote from: dan_house on April 16, 2020, 04:32:53 PM
The Downside to 3d stuff is the seemingly infinite number of selections the slicer -Cura 3.6 in my case- gives you. I printed these “cubes” with tje infill patterns i use the most.

Downside? I consider it an upside.

meh, all perspective. i say the same thing about Photoshop and my video editing programs. Cura at least gives you the option of not displaying stuff yer not using.

Scotchmo · « **Reply #162 on:** April 19, 2020, 03:58:41 AM »

Quote from: oldpro on April 19, 2020, 01:57:08 AM

Very much thinking about getting this printer to go with my other to keep them company LOL

I've got an older Anycubic Delta that I'm please with. That FLSUN that you linked is bigger, but Anycubic also has a newer, bigger Delta printer. Take a look at it for comparison:

https://www.anycubic.com/products/anycubic-predator-fdm-printer

Rob M · « **Reply #163 on:** April 19, 2020, 09:04:26 AM »

Quote from: Scotchmo on April 19, 2020, 03:58:41 AM

Quote from: oldpro on April 19, 2020, 01:57:08 AM
Very much thinking about getting this printer to go with my other to keep them company LOL

I've got an older Anycubic Delta that I'm please with. That FLSUN that you linked is bigger, but Anycubic also has a newer, bigger Delta printer. Take a look at it for comparison:

https://www.anycubic.com/products/anycubic-predator-fdm-printer

455 z , that's a monster and reasonably priced

Rat Sniper (AKA: PaulT58) · « **Reply #164 on:** April 19, 2020, 09:15:12 AM »

Quote from: oldpro on April 19, 2020, 01:57:08 AM

Very much thinking about getting this printer to go with my other to keep them company LOL

I have that one and it's been absolutely trouble free. I did initially have a problem with it talking to my Mac, but found it much easier to just save my G-Code files to the SD card and just print from it. I don't know which one you current have, but I think you'll like it!

I also have the original Snapmaker and have had a lot of bed adhesion problems with it. I have had no issues at all with the FLSUN.

Rob M · « **Reply #165 on:** April 19, 2020, 09:20:24 AM »

heres the tallest delta im aware of at a reasonable price

WobblyHand · « **Reply #166 on:** April 21, 2020, 10:15:02 AM »

Has anyone modeled / printed a 2289 backpacker forearm yet? I'd buy one. Can't seem to find them anymore.

Rat Sniper (AKA: PaulT58) · « **Reply #167 on:** April 21, 2020, 12:56:10 PM »

No, but if you find the .STL file for one, I'll print you one for free!

oldpro · « **Reply #168 on:** April 21, 2020, 02:31:40 PM »

Here ya go gang! https://www.gatewaytoairguns.org/GTA/index.php?board=250.0

WobblyHand · « **Reply #169 on:** April 21, 2020, 03:54:55 PM »

Quote from: Rat Sniper (AKA: PaulT58) on April 21, 2020, 12:56:10 PM

No, but if you find the .STL file for one, I'll print you one for free!

Thanks for the offer! So all I have to do is find the file? Hmm, wonder where on earth one would find it. I did look on Thingiverse, grabcad, 3dmdb, and yeggi for a while. Nada. Wow, some of these sites have atrocious search engines. No selectivity, don't support - or not.

Rat Sniper (AKA: PaulT58) · « **Reply #170 on:** April 21, 2020, 04:51:48 PM »

Quote from: WobblyHand on April 21, 2020, 03:54:55 PM

Quote from: Rat Sniper (AKA: PaulT58) on April 21, 2020, 12:56:10 PM
No, but if you find the .STL file for one, I'll print you one for free!
Thanks for the offer! So all I have to do is find the file? Hmm, wonder where on earth one would find it. I did look on Thingiverse, grabcad, 3dmdb, and yeggi for a while. Nada. Wow, some of these sites have atrocious search engines. No selectivity, don't support - or not.

LOL! Yea, I tried searching those as well and came up empty handed. Hopefully, someone may find one and post it, I know I could use a couple of them!

Insanity · « **Reply #171 on:** April 21, 2020, 05:31:29 PM »

I think thingiverse has gotten worse with their new search layout. Some times I have better luck with a google search if it exists then it will find it or at least help you find it easier.

gatonini · « **Reply #172 on:** April 21, 2020, 07:21:04 PM »

Could you please design a fatty forearm for the P1322 that looks like one for the backpacker

Rob M · « **Reply #173 on:** April 21, 2020, 09:45:35 PM »

That would be a popular item

Qyuubi786 · « **Reply #174 on:** April 26, 2020, 01:56:05 PM »

This is my latest moderator. The baffles are designed to push high pressure air around the bends to a larger volume of space, diverting the air around corners and out the holes in the baffle and eventually going out the hole in the back of the moderator. I've used carbon fibre tubes for the housing and the back end accepts a 1/2 unf bushing.

IMO having bleed holes in the moderator makes it quieter from the muzzle end. Because if you can bleed off as much air before the pellet goes out the muzzle the better.

AGEnthused2 · « **Reply #175 on:** April 26, 2020, 02:08:44 PM »

Quote from: Insanity on April 21, 2020, 05:31:29 PM

I think thingiverse has gotten worse with their new search layout. Some times I have better luck with a google search if it exists then it will find it or at least help you find it easier.

The new layout is horrible, it took several attempts to introduce the new layout, but the search function is junk, it takes forever to find things, if they can even be found.
I still find stuff to print.
I don’t even mind the ads, could they have added advertisements without compromising the ability to find stuff.

thundertaker · « **Reply #176 on:** April 30, 2020, 07:12:56 PM »

Quote from: AGEnthused2 on April 26, 2020, 02:08:44 PM

Quote from: Insanity on April 21, 2020, 05:31:29 PM
I think thingiverse has gotten worse with their new search layout. Some times I have better luck with a google search if it exists then it will find it or at least help you find it easier.

The new layout is horrible, it took several attempts to introduce the new layout, but the search function is junk, it takes forever to find things, if they can even be found.
I still find stuff to print.
I don’t even mind the ads, could they have added advertisements without compromising the ability to find stuff.

The easiest way to search Thingiverse is to use the Google advanced_search page (too new to post links but google dot com/advanced_search)
Search for item in 'all these words:' then thingiverse dot com down at the lower part of the page 'site or domain:' then click advanced search button.

WhatUPSbox? · « **Reply #177 on:** May 11, 2020, 02:27:03 PM »

Finally getting around to some minor upgrades on my CP1. The trigger guard was a little tight and the base was proud of the grip so it interfered with my finger. So I stretched it and reduced the base height. Now a little paint

oldpro · « **Reply #178 on:** May 13, 2020, 10:53:35 PM »

Groot printed on My Delta using Rainbow pastel PLA today.

Insanity · « **Reply #179 on:** May 14, 2020, 04:18:09 PM »

This for a customer. It's the highest I ever had to print on this printer I say it turned out well.

Thank you to our advertisers!

Let's see your 3D printed parts/models/ideas

Author Topic: Let's see your 3D printed parts/models/ideas (Read 48408 times))

AGEnthused2