Author Topic: Just ordered a Diana Outlaw (Read 9048 times))

Nomadic Pirate · « **Reply #40 on:** July 08, 2018, 04:42:47 PM »

Those SPA rifles are looking really good.

fgwhite · « **Reply #41 on:** July 09, 2018, 06:55:48 PM »

i just seen this last nite donnyfl sell this adapter for the out law 45$ its lets use use a 1/2 20 ldc and dones away with factory ldc i looking real hard at the out law from aoa my self was goign to get a guanlet in 25 but the out law to me looks better and from reading your guys post how the out easyer to cock and liter the the guanlet i think i go with the out law hard to cheose eather 22 or 25 ?

KnifeMaker · « **Reply #42 on:** July 09, 2018, 10:00:45 PM »

Donny made me up the first one Prototype), for a Rainstorm, along with the Shogun LDC. Probably more DLC than needed but it will eventually become a bullet shooter.

Sneaky Squirrel Quiet!

fgwhite · « **Reply #43 on:** July 09, 2018, 11:18:20 PM »

its so cool he makes adapters to fit most ever popluar gun i was courious how good the ldc that comes with the out law is cause if it ant good i run the donnyfl i got the 1.5x 6.5 in 25 cal and man it works great

randy_68 · « **Reply #44 on:** July 09, 2018, 11:27:32 PM »

This is what I added to the stock LCD, as its empty from the factory. Works pretty good on my .22. I would think the .25 might need an aftermarket LCD to really quiet it down as the factory one probably isn't large enough. From what I hear Donny's products are top notch and work great but I have no first hand experience with his ldc's. I did purchase an adapter for my Rainstorm and it works great.

Nomadic Pirate · « **Reply #45 on:** July 09, 2018, 11:32:17 PM »

if I was on the market for a .22 in that power level the Outlaw/M16 would for sure be on my radar,

I think people should really keep an eye on this brand in the future.

smythsg · « **Reply #46 on:** July 10, 2018, 12:27:14 AM »

Fred I shoot my .25 cal SPA M16 with the factory LDC in my yard without too much worry, but my neighbors are not so picky. I would call it borderline back yard friendly, fine for most hunting situations. I also have a 1/2 20 adaptor made for me by another member, but haven't felt the need to use it with another LDC just yet.

fgwhite · « **Reply #47 on:** July 10, 2018, 12:55:32 AM »

well i plan on just shooting paper with the out law so i probile use the 22 cal i glad to know the factory ldc is hollow but looks like you guys figured out how to mod them does the factroy reg that comes in the rifle ok to use

Wayne52 · « **Reply #48 on:** July 10, 2018, 03:29:11 AM »

A guy asked me what the twist was on the barrel in the hunting gate, Gertrude told me once what it was but I can't remember, mine is a .22 and is very accurate.

Gertrude · « **Reply #49 on:** July 10, 2018, 04:22:30 AM »

Quote from: Wayne52 on July 10, 2018, 03:29:11 AM

A guy asked me what the twist was on the barrel in the hunting gate, Gertrude told me once what it was but I can't remember, mine is a .22 and is very accurate.

When we asked Julie at SPA, she said they were 1:18, but when we checked it, we found them to be 1:20
hope that helps.

Wayne52 · « **Reply #50 on:** July 10, 2018, 04:28:25 AM »

Thanks Ron !!! I knew it was up there but didn't know exactly where.

randy_68 · « **Reply #51 on:** July 10, 2018, 07:30:30 AM »

My shot string on the previous page is with the factory reg. I did reseal it and polished the washers as I was having some 40 fps spikes when it was new. I think it is working just fine. I have well over a thousand shots through it now.

dlee · « **Reply #52 on:** September 20, 2018, 05:38:47 PM »

Can I ask anyone on this thread whether the stock Outlaw regulator is user-adjustable? Is there a screw to turn like on a Huma? I know there is a Huma replacement but am wondering about the adjustability of the OEM reg. Thanks.

randy_68 · « **Reply #53 on:** September 20, 2018, 05:46:38 PM »

Yes it is user adjustable but different than a Huma. It's been a while since I had it out and I guess I didn't take any pics of it.

I haven't touched anything on it lately and it is still shooting great with the 15 gr JSB at 910+ fps. I did try 18's again but it just shoots the 15's better than anything else.

rtexpress · « **Reply #54 on:** October 27, 2018, 05:18:13 PM »

I'm new to the forum and just seen this thread and sounds like everyone is doing well with their Outlaw. I picked mine up this summer in .22 and really enjoy it. I was moving up from a 850 Air Magnum which is a very good CO2 gun but I wanted to get into PCP's. After looking around I decided the Outlaw was a good entry gun to start with. The only issue I have had was when I first got it the trigger was not working couldn't fire it, the vendor had checked it and it worked then. I pulled it apart and the pin the connecting block(Diagram #64) pivots on in the trigger group had worked almost completely out allowing the block to fall down jamming the trigger. The pin is a press fit in the housing and must not have been installed properly at the factory so I set it with a punch and it's been shooting great ever since. Want to get a 1000+ rounds through it before I look at any mods, would like to try slugs any recommendations? I put a UTG 3-12X44 30mm Etched Glass Mil-dot scope on it with a bi-pod and am impressed with the accuracy. My FPS pretty much match what others are getting mostly target shooting but hope to go hunting with it this fall.

Back_Roads · « **Reply #55 on:** October 28, 2018, 01:18:10 AM »

get a sampler pack from https://nielsenspecialtyammo.com/

DameSp · « **Reply #56 on:** November 01, 2018, 01:00:40 PM »

I have the outlaw in .25 w a UTG swat 3-12x44 scope. Love it.

Herman Hedning · « **Reply #57 on:** November 05, 2018, 04:34:58 PM »

Quote from: prfssrlee on September 20, 2018, 05:38:47 PM

Can I ask anyone on this thread whether the stock Outlaw regulator is user-adjustable? Is there a screw to turn like on a Huma? I know there is a Huma replacement but am wondering about the adjustability of the OEM reg. Thanks.

Did you find out how to adjust this regulator ? How much does what

Mine 25 is loud

any mods or aftermarked suppressor recommended for this rifle?

randy_68 · « **Reply #58 on:** November 06, 2018, 07:20:00 AM »

Yes the regular is adjustable. I had mine apart and adjusted it which took several tries to get it where I wanted. I was having issues with erratic fps so I tore it down, replaced all orings, lightly polished the reg washers and readjusted . Worked great and was getting 55 shots with 15.9 JSB at 915 fos. One of my favorite guns but I did sell it to fund my Brocock Bantam.

djbourg · « **Reply #59 on:** November 25, 2018, 12:28:12 PM »

Hope I'm not butting in , I'm looking hard at the outlaw too, vs marauder in .22 with the mmhf barrel.

Thank you to our advertisers!

Just ordered a Diana Outlaw

Author Topic: Just ordered a Diana Outlaw (Read 9048 times))

Nomadic Pirate

fgwhite

fgwhite

Nomadic Pirate

fgwhite