It’s all a matter of perspective! Picture/photography thread

[Moke]

Any problems with snakes or scorpions there with all the rocks?

This was a large new home tract build. On the side of the project opposite of the rock pile (a mile or more away), there were likely snakes.  But, where the rock pile was, was scraped down to hard bare soil. There was no where for a snake to be, or, come from.

Scorpions,..
None that I was aware of.

At my place, the final destination for a lot of the rocks,... absolutely, yes, lots of snakes. I've caught and released to the river bottom, 16 Rattlesnakes in 12 years, on our 1 acre lot.
I've also seen caught and released back onto our property an endless string of harmless snakes, with lots of useful rodent squeezing constrictors..

[Rabbit\Squirrel Killer]

Some unusual clouds this afternoon.

[USAFANG6799]

All I can say is I'm perplex as to how this formed in this stream.

[Back_Roads]

 It was a nice Friday morning, I let Convoy out for some air time. 2 days earlier it was 12f and he just did a lap around the shop and right back in the door.
 This time he spent an hour or so on the barn roof just behind the old silo, then returned to supervise my work in the shop.


 Moving Picture

[avator]

Nice... maybe next you can train Convoy to fly out and pick up those Airgun related packages. Heck with USPS, give them the "bird" if you will.   

[Back_Roads]

Nice... maybe next you can train Convoy to fly out and pick up those Airgun related packages. Heck with USPS, give them the "bird" if you will.   

Hmm and here I was hoping for better message service

[Madd Hatter]

Evening

[Cope1041]

Some one at the factory years ago had a sense of humor,  Found this wrench at work a while back.

[Cope1041]

1st real day with out wind and massive weather,  nice pic of back drop where I work

[Rabbit\Squirrel Killer]

Some one at the factory years ago had a sense of humor,  Found this wrench at work a while back.

I think that may be a 19/32 and just looks like 18/32, have a 19/32 Socket.

[Cope1041]

its the only non traditional wrench in that entire set of wrenches from the same company,  and its pretty old,  not sure how far back the non standard sizes go,  the stamping could be off,  either way I still think its funny as *(&^,  especially when asking one of my interns to grab the wrench by size.  Or if I ask for the 9\16 on the wall.  they can never find it (technically true i guess).

[Madd Hatter]

I'm wondering if that's a witworth size? I've got a socket that size also I inherited from my dad. I don't think I've ever used it.

[Rabbit\Squirrel Killer]

its the only non traditional wrench in that entire set of wrenches from the same company,  and its pretty old,  not sure how far back the non standard sizes go,  the stamping could be off,  either way I still think its funny as *(&^,  especially when asking one of my interns to grab the wrench by size.  Or if I ask for the 9\16 on the wall.  they can never find it (technically true i guess).

I have one old USA made wrench that is a 5/8-9/16 combination wrench and it is just marked 26, I have no idea why!

[Madd Hatter]

I'm wondering if that's a witworth size? I've got a socket that size also I inherited from my dad. I don't think I've ever used it.

By the way it's a old craftsman.

[Hoosier Daddy]

I'm wondering if that's a witworth size? I've got a socket that size also I inherited from my dad. I don't think I've ever used it.

If it is close to a 9/16 it is not Whitworth.
Whitworth goes by the bolt size... not the head size
For example a 1/4-20 bolt would use a 7/16 SAE wrench... but in Whitworth a 1/4-20 would use a 1/4" wrench.
My 9/16 Whitworth is equal to a modern 1"SAE or 25mm tool.

The Whitworth Standard was created by an Englishman named Joseph Whitworth in 1841. He also Invented the "Whitworth Sharpshooters" rifle that saw use by the Confederates in the American Civil War.

Yes, I work on old Brit Bikes. 

[Madd Hatter]

I'm wondering if that's a witworth size? I've got a socket that size also I inherited from my dad. I don't think I've ever used it.

If it is close to a 9/16 it is not Whitworth.
Whitworth goes by the bolt size... not the head size
For example a 1/4-20 bolt would use a 7/16 SAE wrench... but in Whitworth a 1/4-20 would use a 1/4" wrench.
My 9/16 Whitworth is equal to a modern 1"SAE or 25mm tool.

The Whitworth Standard was created by an Englishman named Joseph Whitworth in 1841. He also Invented the "Whitworth Sharpshooters" rifle that saw use by the Confederates in the American Civil War.

Yes, I work on old Brit Bikes. 

Yeah, I use to work on them and 1 in particular (BSA 441 victor) along with the triumphs that the shop sold. I'd work on my victor all week long just so I could go riding on Sunday. It's just been so long since I worked on one I couldn't remember. Dang CRS!!

[Hoosier Daddy]

1 in particular (BSA 441 victor) along with the triumphs that the shop sold.

You silver tongue devil... I am the proud owner of a '67 441 Victor Roadster (only year made)... among other Beezers.

[Hoosier Daddy]

16 cyl (yes 16) goodness from the '30's in Auburn Indiana.

[Madd Hatter]

1 in particular (BSA 441 victor) along with the triumphs that the shop sold.

You silver tongue devil... I am the proud owner of a '67 441 Victor Roadster (only year made)... among other Beezers.

Mine was a 1969 square barrel that I rode off road.

[Nukall856]

3.9.24
-6°F, 17mph wind

"Chirpchirpchirp
Sharkbait ooh ha ha"

NVak