My Airmax/Artemis P15

[MB]

Hi Travis,

I have been dealing with SPA for some time on doing some custom guns and distribution, I am not US based so not in your market ...The P15 has in my opinion three derivatives that I would explore:

1).P15  .25 Extra Plenum Volume 30 mm, Huma Reg, 5.5 mm Transfer Port, Custom Shroud inserts Similar to AirFective Tuning UK and a 1/2 Unf Adaptor that fits on the shroud (AirFective Tuning makes them) Design it to shoot JSB 25 and 34 Grain and Slugs...

2).P15  .22 Slight increase in plenum volume maybe a 15mm spacer, Huma Reg, Custom Shroud inserts Similar to AirFective Tuning UK and a 1/2 Unf Adaptor that fits on the shroud - Designed to shoot JSB 25 Grain and Nielsson Slugs 23 Grain and 28 Grain Boat tails...(This would be an awesome hunter).

3).P15 .177 -Play with lighter hammer spring, Reduce the TP Size to 80% of caliber (as I believe all stock P15 TP's are 4.5 mm ) Huma Reg, Custom Shroud inserts Similar to AirFective Tuning UK and a 1/2 Unf Adaptor that fits on the shroud - This would be an awesome plinker and give you a good shot count.

The only other things I would do:

1). change the connectors (Firing Housing Pins) that join the trigger to rod and trigger mechanism, perhaps use high end RC bearings / Connectors.
2). Design a semi / Bullpup /Carbine Stock - Similar to the Kalibergun Mini .22
3). Add a Bolt Pin Sleeve to the cocking arm - similar to the M16 Cocking Arm...

I believe you could generate a very good following for these awesome light guns...

My 10 cents

[Bill25]

That email address is invalid .Do you have another way to reach him or the link to those classifieds ? Thanks

That address you were looking for is shanan5s@yahoo.com