Author Topic: Free Spreadsheet from triggertreat (Read 8759 times - 16 votes)
)

Trigger_Finger · « **Reply #60 on:** December 29, 2017, 01:29:31 AM »

Thank you Trigger Treat! It works on my 5 yr old Imac 27inch.

ScottB · « **Reply #61 on:** December 29, 2017, 09:08:08 AM »

Quote from: dan_house on November 20, 2017, 04:56:52 PM

Keith, have you given thought to doing/redoing this in the Open Office spreadsheet?

ITs free, updates are reasonably frequent. Might open the audience a bit more for folks that dont have Excel.....

https://www.openoffice.org/download/

HTH

dan

Dan, I just tried the spreadsheet on Openoffice, it works just fine for me, you will need to change a security setting
to enable macros, after that it worked just fine.

triggertreat · « **Reply #62 on:** December 30, 2017, 11:45:09 AM »

Thanks Scott and Alfonso! Good to know...Enjoy!

mobilehomer · « **Reply #63 on:** January 31, 2018, 04:12:21 PM »

Keith, just downloaded and ran my first Maximus string. The spreadsheet works GREAT!!! Thanks!!!

triggertreat · « **Reply #64 on:** January 31, 2018, 06:47:31 PM »

Edit 9-6-18: New Rev. 03 version.

Click here to download the free Rev 03 spreadsheet

Thanks! Post some strings if you want so we can see what a highly honed Maximus looks like.

frodo9mm · « **Reply #65 on:** July 20, 2018, 08:47:42 AM »

Keith -

I am doing some tuning on my Marauders and would like you use your Spreadsheet.

Thank you for doing this. It looks very useful.

Thanks again,
Fletch

Harpoon1 · « **Reply #66 on:** July 20, 2018, 09:06:30 AM »

Keith

I've tried several times now but have been unable to download this to "Numbers" on my iPad! Alwasy get a "whoops error occured" message.

I see someone else was able to use it on their iMac.

Any advice?

triggertreat · « **Reply #67 on:** July 20, 2018, 11:36:26 AM »

Quote from: Harpoon1 on July 20, 2018, 09:06:30 AM

Keith

I've tried several times now but have been unable to download this to "Numbers" on my iPad! Alwasy get a "whoops error occured" message.

I see someone else was able to use it on their iMac.

Any advice?

Sorry, I'm not a Mac user. You might ask the Mac guys. It was built on a PC using MS Excel and will work well with that.

screwwork · « **Reply #68 on:** July 20, 2018, 11:49:38 AM »

Quote from: Harpoon1 on July 20, 2018, 09:06:30 AM

Keith
I've tried several times now but have been unable to download this to "Numbers" on my iPad! Alwasy get a "whoops error occured" message.
I see someone else was able to use it on their iMac.
Any advice?

Can you download the file to your Mac?
I got the same error on my laptop and was still able to download the file.

WeeHeavy · « **Reply #69 on:** July 20, 2018, 11:57:41 AM »

I don't have an iPad or numbers, but if you have a Mac, you can open it in Excel as a read only file and then save that as a new file. Try transferring the new file to the iPad and see if it opens in Numbers then? Of course, this assumes you have a Mac and Excel to begin with. You might also see if you can open it in Excel for iOS (I think it is free for iPads with a 10" screen and smaller). Perhaps you can work with it that way.

mobilehomer · « **Reply #70 on:** July 20, 2018, 12:24:40 PM »

The "whoops" error message says "unable to preview", then just hit the download button. It works fine. Just did it on my Win10 laptop and android tablet.

Rattletrap1970 · « **Reply #71 on:** July 20, 2018, 12:39:08 PM »

Thanks a bunch, definitely going to try this out this weekend with the BT65 .25 cal. Just curious, but where could the SPClark SSA software be found. I'd love to try them both, but, I can't find that one anywhere.

Oh, one quick question about your Spreadsheet. In the Left hand column of "variables" that you can enter, I see "Regulated cc". What is that? Is that the volume of the regulator if you have one?

Thanks

Harpoon1 · « **Reply #72 on:** July 20, 2018, 01:22:37 PM »

Quote from: screwwork on July 20, 2018, 11:49:38 AM

Quote from: Harpoon1 on July 20, 2018, 09:06:30 AM
Keith
I've tried several times now but have been unable to download this to "Numbers" on my iPad! Alwasy get a "whoops error occured" message.
I see someone else was able to use it on their iMac.
Any advice?

Can you download the file to your Mac?
I got the same error on my laptop and was still able to download the file.

Randy

No Mac/laptop, only an iPad. Bummer.

Thanks

Bentong · « **Reply #73 on:** July 20, 2018, 02:02:16 PM »

How do you use this? Gives me a whoops and when I downloaded it it won't open...gives me 0% forever

triggertreat · « **Reply #74 on:** July 20, 2018, 03:43:58 PM »

Quote from: Bentong on July 20, 2018, 02:02:16 PM

How do you use this? Gives me a whoops and when I downloaded it it won't open...gives me 0% forever

I just downloaded the spreadsheet and opened it without any issues. I would choose "save file" instead of "open file". I am not sure why the preview on Google doesn't display anymore as it use to. Maybe some new security measure or something?

triggertreat · « **Reply #75 on:** July 20, 2018, 04:01:40 PM »

Quote from: Rattletrap1970 on July 20, 2018, 12:39:08 PM

Thanks a bunch, definitely going to try this out this weekend with the BT65 .25 cal. Just curious, but where could the SPClark SSA software be found. I'd love to try them both, but, I can't find that one anywhere.

Oh, one quick question about your Spreadsheet. In the Left hand column of "variables" that you can enter, I see "Regulated cc". What is that? Is that the volume of the regulator if you have one?

Thanks

Yes, you can input your regulated cc volume and your remaining HPA reservoir cc volume along with your set point for an accurate efficiency reading provided the start and stop pressures are accurate too. The more accurate the numbers the more accurate the efficiency data. I recommend a fluid test as I've done to be precise. However, the numbers I have in the spreadsheet should be very close in a similar setup with a regulator. If no regulator, set the set point and regulated cc to zero and set your reservoir cc to 215 for accurate efficiency numbers when using a stock Marauder setup.

I am still in touch with SynRodSteve (handle name on this forum) who created the SSA. I still use the SSA and it is an awesome spreadsheet. Steve has taken a break from the forums, but he still has his .25 Synrod and likes it. The SSA is a complexed spreadsheet and requires support when dealing with the public. You can try to PM Steve and see if he is still up to offering and supporting it.

Harpoon1 · « **Reply #76 on:** July 20, 2018, 04:11:25 PM »

Quote from: mobilehomer on July 20, 2018, 12:24:40 PM

The "whoops" error message says "unable to preview", then just hit the download button. It works fine. Just did it on my Win10 laptop and android tablet.

Probably works for you because your using a "Windows" based OS.

When I try it with a "Mac" based OS and "Numbers", I get this!

triggertreat · « **Reply #77 on:** July 20, 2018, 05:10:59 PM »

Quote from: Harpoon1 on July 20, 2018, 04:11:25 PM

Quote from: mobilehomer on July 20, 2018, 12:24:40 PM
The "whoops" error message says "unable to preview", then just hit the download button. It works fine. Just did it on my Win10 laptop and android tablet.

Probably works for you because your using a "Windows" based OS.

When I try it with a "Mac" based OS and "Numbers", I get this!

Sorry to hear that. I put a lot of time into building this spreadsheet to share as I saw a need for it on this forum and think it's a good one.

I do have some thoughts of revising the spreadsheet to make it even better and more user friendly. Come on over to Windows, it's much better than in the past.

I have been on a chat with Google IT about the preview error for the last half-hour. The conclusion was that their IT can't figure out exactly why the preview exist as they get the error too. They suggest trying to upload it again which I will do when the revision is ready.

Rattletrap1970 · « **Reply #78 on:** July 20, 2018, 05:39:51 PM »

Thanks for the info. Just Chrono'ed the BT65 and used your spreadsheet. (I love the spreadsheet)

The gun is a BT65 Elite QE in .25. Fill was 200 bar. Huma regulator set at 130 BAR with the little metering Socket Head Cap Screw installed in the end (the way it came). No other mods yet. Both the Huma face O-ring AND the Valve O-ring are installed as I found the cylinder leaked if I left the valve O-ring off.
Ammo is JSB Diabolo Exact 25.39gr unsorted.

My goal was a shot string close being able to empty the three (9 shot) mags that came with it at a reasonable ES, with a FPE of at least 40.

I get 866 ft sec to 855 ft sec over 25 shots with an ES of 4% (42.3 FPE to 40.2 FPE).
From shot 25 to shot 36 I lost about 0.5 FPE per shot, with a final velocity of 754 with 32.1 FPE (these last 11 shots were still pretty accurate at 41 yards).

I find this tuning will keep any shot within the squares of the free target you can get from "Air Tanks For Sale" (I believe are 1" squares), most cutting the .25 dia red dot in the center if not taking it out entirely. I've just got back into PCP airguns and am relatively new to tuning (always been a Powder Burner before that). To those who tune, based on what I said I was looking for above, how's this look?

Harpoon1 · « **Reply #79 on:** July 20, 2018, 06:05:55 PM »

Quote

Come on over to Windows, it's much better than in the past..................

Keith,

Used to run "Fusion" and "Bootcamp" on a couple of Macbooks years ago. Best of both worlds, then I retired and didnt really need them anymore. Now an iPhone and iPad cover 99% of what I need these days but there are still a couple of Windows based programs I miss. Maybe its time to revisit the idea.

Thanks for following up on this.

Thank you to our advertisers!

Free Spreadsheet from triggertreat

Author Topic: Free Spreadsheet from triggertreat (Read 8759 times - 16 votes) )

Author Topic: Free Spreadsheet from triggertreat (Read 8759 times - 16 votes)
)