Smaller NOE Sizing Bushings Now Available

[rsterne]

At my request, NOE have run sizing dies 0.001" smaller than previously available for airgun barrels.... You can now get bushings in 0.215", 0.248", and 0.298" in addition to the larger sizes previously available.... The 0.248" are listed in the .243 cal section, the others in the .22 and .30 cal airgun sections....

http://noebulletmolds.com/NV/index.php?cPath=104&osCsid=t437jgnsq2l9obvjlb8g1efpi6

I also asked Al to make sizing bushings in 0.241", 0.242", 0.336", 0.337", 0.354", 0.400", 0.450", 0.451" & 0.457".... some airgunners are finding that they are better off for accuracy (and velocity) sizing just under the groove diameter, rather than just over.... NOE listened.... 

Bob

[aceflier]

Need .455 and .456  Nevermind see them in the other .45 cal list. Do I need a push rod or will my lee rod work?

[rsterne]

They are available in the .45 cal section....  http://noebulletmolds.com/NV/index.php?cPath=104_407

The Lee rods work fine, provided they are small enough to pass through the bushing without touching it....

Bob

[aceflier]

Sweet thanks for the heads up Bob.