Author Topic: RWS 350 -T05 TRIGGER SPRING SWAP (Read 2660 times))

shiyfire · « **on:** May 03, 2011, 09:59:57 PM »

I took mine apart today and replaced the small one under the sear with a ink pen spring and it feels great. Is this a common fix for these triggers?Does this make it un-safe?

Mark 611 · « **Reply #1 on:** May 03, 2011, 10:25:08 PM »

MMMMM! good question, even tho I've done a similar spring swap, I think as long as you don't use a heavier piston spring you should be ok, what will happen is if its to light the barrel lock up won't hold and or you could get a fire off unexpectedly due to the spring not being able to hold the pressure of the main spring for the piston

JimL911 · « **Reply #2 on:** May 03, 2011, 10:28:06 PM »

Lots of people change out the spring. Here is a proper replacement.
http://www1.mscdirect.com/CGI/NNSRIT2?PMPXNO=3348059&PMTERM=00612648

Rob Hawkins · « **Reply #3 on:** May 09, 2011, 10:09:03 PM »

I like this one better.
http://www1.mscdirect.com/CGI/NNSRIT2?PMPXNO=2709842&PMT4NO=0
Rob

Thank you to our advertisers!

RWS 350 -T05 TRIGGER SPRING SWAP

Author Topic: RWS 350 -T05 TRIGGER SPRING SWAP (Read 2660 times))

shiyfire

RWS 350 -T05 TRIGGER SPRING SWAP

Mark 611

Re: RWS 350 -T05 TRIGGER SPRING SWAP

JimL911

Re: RWS 350 -T05 TRIGGER SPRING SWAP

Rob Hawkins

Re: RWS 350 -T05 TRIGGER SPRING SWAP