PP700 adventure started(Artemis PP700s-a)

[kbstingwing]

Mine got seized by Customs, found out today, got a letter saying it doesn't have import stamp or mark.

[WesBob]

I've got another load of these coming in April. Snowpeak says they are being discontinued 
I have some 16" barrels for them in 22 cal in stock, just waiting for the Carbon fiber shrouds and 1/2" 28 adapters and muzzle brakes to arrive. I'm hoping to get some 25 cal 16" barrels I have here converted to for this pistol as well. I have some PP750 long barrels getting machined as well, in 22 cal.

[darkcharisma]

I've got another load of these coming in April. Snowpeak says they are being discontinued 
I have some 16" barrels for them in 22 cal in stock, just waiting for the Carbon fiber shrouds and 1/2" 28 adapters and muzzle brakes to arrive. I'm hoping to get some 25 cal 16" barrels I have here converted to for this pistol as well. I have some PP750 long barrels getting machined as well, in 22 cal.

I dont see them barrels listed on your website.

correction: now i do. i wanna see the .25 cal barrel!

[KnifeMaker]

Hi Ya Duy!!!


Wes, Sure would be nice to see someone come out with a nice carbine stock for them.
Would love a swing block little rifle. sort of a mini Quigley special. LOL!
 
Sting, man, I have never heard of that before. So sorry Sir!


Knife

[darkcharisma]

Hey Mike! how do ya like the 600mm barrel on my pp700? i am about to chop 100mm off

[JohnnyPDX]

Mine got seized by Customs, found out today, got a letter saying it doesn't have import stamp or mark.

That BLOWS. I hope there is a solution that gets you a replacement very soon.

[JohnnyPDX]

...I have some 16" barrels for them in 22 cal in stock, just waiting for the Carbon fiber shrouds and 1/2" 28 adapters and muzzle brakes to arrive....

Will / are these .22cal 16" barrels with a carbon fiber shroud be a tensioned barrel system?

I made a proper shroud for my PP700SA that obviates the need for an LDC but I would like one in CF and with a longer barrel.

[darkcharisma]

If and when the regulator doesnt spike, i can hit 760fps with 33.95gr .25 caliber  at 1800psi. sometimes peaked at 780fps.

I need to fix the regulator. about to put this one back on the rack and think what i wanna do with the regulator.

[LegionAir]

If and when the regulator doesnt spike, i can hit 760fps with 33.95gr .25 caliber  at 1800psi. sometimes peaked at 780fps.

I need to fix the regulator. about to put this one back on the rack and think what i wanna do with the regulator.

Wow you put a lot of work into that. All it needs now is a carbine stock. I’m guessing that cylinder on the side is the plenum?

I have a huma reg that I don’t need. Bought it for a second pp700 that I got rid of. If you want it I’ll sell it to you for a good price

[darkcharisma]

If and when the regulator doesnt spike, i can hit 760fps with 33.95gr .25 caliber  at 1800psi. sometimes peaked at 780fps.

I need to fix the regulator. about to put this one back on the rack and think what i wanna do with the regulator.

Wow you put a lot of work into that. All it needs now is a carbine stock. I’m guessing that cylinder on the side is the plenum?

I have a huma reg that I don’t need. Bought it for a second pp700 that I got rid of. If you want it I’ll sell it to you for a good price

I am mostly trying to finish the project I started.

Is that an "in tube" regulator? send me a pm.

[darkcharisma]

I bored the plenum a bit larger, put a 90 duro oring into the breech. 1800psi maxed out at 790fps for 33.95 grains. I got both fx slug and pellet liners fixed to a m11x1 collar that threads into the m11x1 newly tapped breech. I am going to give this one more try at 2200psi with heavier hammer springs later on. I dont think it's that hard to reach for 850fps any more.

this is done with a bottle reg, no more spikes

[darkcharisma]

839fps with 33.95 .25 cal at 2100psi. tuned it down to 725fps at 1800psi.

I almost hit my targetted 850fps.

34grain nsa slugs going at 780fps at 1800psi @_@

[JohnnyPDX]

839fps with 33.95 .25 cal at 2100psi. tuned it down to 725fps at 1800psi.

I almost hit my targetted 850fps.

34grain nsa slugs going at 780fps at 1800psi @_@

I realize you are going to hit your goal of 850fps with a 34 grain projectile.

At this point the gun seems like it would send a 25.4 pellet at 920+fps perhaps? That alone would be cool.

[darkcharisma]

i would think so. i dont have any lighter pellets to verify but based on how its pushing the 33.95 grains above 50fpe, it would be a piece of cake.

[JohnnyPDX]

i would think so. i dont have any lighter pellets to verify but based on how its pushing the 33.95 grains above 50fpe, it would be a piece of cake.

Yes. 920fps is probably conservative... mayne even 950.

I like your work!!!

[kbstingwing]

Mine got seized by Customs, found out today, got a letter saying it doesn't have import stamp or mark.

That BLOWS. I hope there is a solution that gets you a replacement very soon.

gotta work something out with the vendor soon.

[JohnnyPDX]

Mine got seized by Customs, found out today, got a letter saying it doesn't have import stamp or mark.

That BLOWS. I hope there is a solution that gets you a replacement very soon.

gotta work something out with the vendor soon.

I wish you the best of luck and don't think you'll need it.

It'll be resolved to YOUR satisfaction.

[darkcharisma]

I hope it works out Kevin, I like Krale more than anyone else for oversea vendors

last update on the gun i am working with.

41 shots from 209 to 157bar, I can shoot down to 125bar which is 1800psi regulator set point. 750fps with 34 grain NSA slugs. Not bad, Not bad at all.

[WesBob]

...I have some 16" barrels for them in 22 cal in stock, just waiting for the Carbon fiber shrouds and 1/2" 28 adapters and muzzle brakes to arrive....

Will / are these .22cal 16" barrels with a carbon fiber shroud be a tensioned barrel system?

I made a proper shroud for my PP700SA that obviates the need for an LDC but I would like one in CF and with a longer barrel.

It'll be tensioned by the 1/2" adapter on the end tightening against the carbon fiber sleeve. Everything has been taking extra long. The carbon tubes got sent back by DHL for some reason and I had to reorder them.
On their way now.
Regards,
Wes

[kbstingwing]

Well just got a message back from Aceros de Hispania ( the vendor) about my pistol, it's lost in Customs, they had seized it and will not release it, so they are issuing me a refund.
they tried very hard to get it to me, but it was a losing battle.