PP700 adventure started(Artemis PP700s-a)

[Bob-26]

Well, I'm working on increasing our tribe of air gunners. I just got somebody really excited about getting their first airgun -- and they want the PP700S-A.

So, who is selling the PP700 right now in the US?
(And: Is that the full-power version?)

Thanks for a quick tip, he seems to be anxious....   

Matthias

I too would like to know as I'm wanting one now 

[Techie]

Nobody in the U.S. that I know of now.  Mrodair only has the .177 caliber version now, not the recommended .22 caliber.  Many reports of regulator creepage on these guns, including the two I have seen; mine and my friends.

[Wayne52]

Nobody in the U.S. that I know of now.  Mrodair only has the .177 caliber version now, not the recommended .22 caliber.  Many reports of regulator creepage on these guns, including the two I have seen; mine and my friends.

They're out of the .177's too, I tried  putting one in the cart but no success, by the looks of it they've only got 1 Airmax Dominator left in .22 also, I use my Dominator a lot and it's a fine gun indeed.

[Backyard Shootr]

Krale has them in stock.

[Wayne52]

The nice thing about the Krale guns is they are full powered out of the box.  I've never bought from Krale however I've only heard good about them.

[Backyard Shootr]

Bought mine from Krale and had it in two days. Try buying something in the US and getting in two days.

[nervoustrigger]

Mrodair only has the .177 caliber version now, not the recommended .22 caliber.

Whut chu talkin’ bout, Willis?
 
I hereby recommend the .177.  Very pleased with mine, especially after sorting out the creeping regulator.  Not pellet picky at all.  It was accurate when I had it tuned to 13fpe for pesting, and still accurate now running 6fpe for 80+ shots for plinking and targets.  Very pleasant to use with this softer tune, both in terms of the report and the trigger is substantially better without so much load translated from the hammer spring.

[Pelletjunkie]

Mrodair only has the .177 caliber version now, not the recommended .22 caliber.

Whut chu talkin’ bout, Willis?
 
I hereby recommend the .177.  Very pleased with mine, especially after sorting out the creeping regulator.  Not pellet picky at all.  It was accurate when I had it tuned to 13fpe for pesting, and still accurate now running 6fpe for 80+ shots for plinking and targets.  Very pleasant to use with this softer tune, both in terms of the report and the trigger is substantially better without so much load translated from the hammer spring.

Same here. Mine shoots a fast 8.8gr HP pellet and puts the smack down on small critters. Easy to shoot because I am not trying to push more lead that will never be as flat shooting as the .177 at pistol ranges.

[Techie]

I stand corrected regarding .22 vs. .177 "recommended"; just that the .22 will give you more power, which is what most seem to be after in this pistol.  Negligible difference in trajectory between the .177 and .22 out to 25 yards.  We are talking a few tenths of an inch.  I also prefer .22 because the pellets are easier to handle and load for me.

[nervoustrigger]

Yeah, no worries.  There are pros and cons for both.  I just wanted to share some perspective on the .177.

[Wayne52]

I pretty much never use anything but a .22 and .25 out in the woods.  My DAR177 is about the only .177 that I'll hunt with, the thing is like a laser.

[wimpanzee]

I got mine from Krale too. Great service. Mine took over a week, but it got caught in a storm in New Jersey.

[elguapo99]

I ordered a .22 from  Canadashootingsports.ca yesterday. It is scheduled for delivery via UPS on Friday. At yesterday's exchange rate it was $219 w/free shipping. I jumped the gun and ordered the .22 and then realized that I could have ordered the .177 and added a spare .22 barrel for another 15 bucks. Maybe I can find a .177 barrel at some point just to fool around with it.

[Backyard Shootr]

Updated picture of my Mini. 

[DeadEye Ice]

Updated picture of my Mini. 

Where did you get the stock adapter? That is exactly what im looking for.

Ice

[rumbleUU]

Updated picture of my Mini. 

Where did you get the stock adapter? That is exactly what im looking for.

Ice

He made it himself, I also Want one
Maybee he can start making them, haha

look at : Reply #1741

[JungleShooter]

I'll buy one!! 

[Backyard Shootr]

I wish I could help you guys out. But everything I did was all done by hand tools only. It took me days just to make that adapter. Then with the added weight and stress from the AR butt stocks I also had to make brackets for the adapter to mount to so the weight and stress would be on the brackets and not on the plastic grips. I had about $50 in parts but lots and lots of labor. Even with modern machines I would guess it would still be time consuming.    

[WesBob]

Sorry for coming to check here again so late. Looks like most questions were answered. The US dealer apparently that bought 40 of them is only selling at gun shows and does not have a website.
I may have one in 22 cal left. I'm still waiting for all those that previously asked for one to reply.
It's looking like it's still a real possibility the PP750 will be free from Diana's monopoly, so that's exciting.
I keep getting noncommittal answers though from Snowpeak. The guns have gone through production already and are ready to ship, though they'd have to be modified for Canada before I can get any. Krale-schietsport.nl may have some soon if Diana is not taking them, which would be a nice option for you guys as well.
Cheers,
Wes

[KnifeMaker]

Wes, Mine is up and running great! Thanks Guy!!!!!


Knife