PP700 adventure started(Artemis PP700s-a)

[Wayne52]

I'm tempted to get me another one myself, great deal at Mrodair on them right now.  I just checked and both the .22 & .177 are available, they are a killer little pistol for $189 shipped, you probably won't find them much more inexpensive than that!

[YEMX]

I'm tempted to get me another one myself, great deal at Mrodair on them right now.  I just checked and both the .22 & .177 are available, they are a killer little pistol for $189 shipped, you probably won't find them much more inexpensive than that!

Exactly my thought- Hence why I finally bought one now.  I found a Gen1 on the Yellow for $180- no scope or rings, just the pistol as-is from the factory, slightly used.  I thought to myself: "Self, why would you buy a Gen1 for nearly the price of a brand new Gen2?!"  I had no response to that.  Other than finally buying one, of course. 

[Sfttailrdr46]

I got mine in 4 days ordered on a Friday and in my hands by Tuesday . It is a fun pistol and pretty accurate once it gets broken in. Mine is .22 and at 25 yards will punch into a 2 quart Tropicana oj jug and dimple the back side with jug full of water . Off hand 3 out of 5 shots inside 2.5" the fliers were all me. My offhand pistol skills stink due to age and rust

Off a bag the groups are fairly tight at 10 yards single ragged hole

PS these little diamonds in the rough are a bargain at $189.00 where else are you going to find a descent PCP pistol under $200.00

They may not be perfect but did I mention the fun factor and with the Rocker 1 LDC very back yard friendly 

[BSJ]

I've wanted one from the start, but had so many projects in the works I held off...

But, I've completed a few projects since then, and threw caution to the wind and bought one.  From MrodAir.

Ugh, I'm only on page 6!!   

Not to thread-jack, but how long was the wait from MrodAir?

About a week. No tracking information will be provided...

[YEMX]

...Not to thread-jack, but how long was the wait from MrodAir?

About a week. No tracking information will be provided...

EXCELLENT!!  The time, not the lack of communication!   

[Wayne52]

One thing that I can say is that if Mike has it in stock he's very prompt about shipping it out right away. What I've ordered from Mike always was at my door within a week or less. Usually in 4-5 days it was in my hands.

[BSJ]

I got confirmation that the SPA web site is incorrect where it says the PP700's maximum fill pressure is 24Mpa. 22Mpa is indeed the maximum...

[Thiel]

if im filling my way over the limit, it releases air till the gauge is slighlty in the red.

[Wolverineshooter]

I just base things on the green zone, which is 22. I have to fill it to 24 with my compressor, once done and remove the fill probe it goes back down to 22

[Wolverineshooter]

...Not to thread-jack, but how long was the wait from MrodAir?

About a week. No tracking information will be provided...

EXCELLENT!!  The time, not the lack of communication!   

I waited for a week.
I had some issues, emailed and called Mike and no response so far

[SilentMatt]

If you sign up for UPS MyChoice, you can see when/if it ships.

[YEMX]

I got a UPS notice today...  It should be here on Thursday.  I'm keeping my fingers crossed, but I'm not holding my breath. 

[SilentMatt]

This is what happens if you over torque the barrel nut... Wish I had time to make a new one 

[Sfttailrdr46]

One of our resident PP700 experts needs to weed through this entire threat and put together a tutorial of what works and what has real benefit and what the most beneficial mods are and then post to the library

[Wayne52]

Well my MKII finally crapped out on me, it's finally time to take this puppy apart and replace with some good nitrile orings.  I know that someone has posted all the sizes it takes I just can't remember where it was.  It's leaking from the most common leak too, at the probe fill.

[nervoustrigger]

That's where mine started leaking from as well.  This particular O-ring does not require a precise size.  The original is a metric and I simply located a close match in my SAE assortment.  It's really easy to get to so it wouldn't be too bad to use one of the service spares to get by for now.

[SilentMatt]

Same here, it started filling really slow then started leaking. I just grabbed a close fit out of the Harbor Freight assortment box.

[YEMX]

One of our resident PP700 experts needs to weed through this entire threat and put together a tutorial of what works and what has real benefit and what the most beneficial mods are and then post to the library

THIS

[Sfttailrdr46]

One of our resident PP700 experts needs to weed through this entire threat and put together a tutorial of what works and what has real benefit and what the most beneficial mods are and then post to the library

THIS

  Yep ! all 94 pages 

[YEMX]

But... but there's only 38 pages!