PP700 adventure started(Artemis PP700s-a)

[MonsterMaxx]

Put a 100+ CPHP through yours and see if it helps the reg break in.

lol, those are exactly what I got from Academy Sports today since all the 'fancy' ones from AGD don't show up until tomorrow.

Just looking in the tin, I'd say it's half empty now...yea, I guess I've filled it 6-7 times.  I'll try it on the chrony again tomorrow.

[Rallyshark]

Put a 100+ CPHP through yours and see if it helps the reg break in.

lol, those are exactly what I got from Academy Sports today since all the 'fancy' ones from AGD don't show up until tomorrow.

Just looking in the tin, I'd say it's half empty now...yea, I guess I've filled it 6-7 times.  I'll try it on the chrony again tomorrow.

The first couple of shots after a fill are always throw aways.  They tend to do better with higher reg settings, and the lower the reg setting the worse the creep it seems.  Most people's regs settle down after 200-300 shots.  The gun has a ton of adjustability to level things out as well.  You have the reg adjustment, the hammer spring adjustment, and the transfer adjustment to play with.  If you're only shooting shorter distances(<25 yards) the variation in velocity won't make much difference though.  I wouldn't send it back, especially if you're going to get David to tune it for ya  

[titeuf007]

on facebook page we can achieve 33j if we remove original  regulator with stock barrel..so the idea is too keep this great power and use an external paintball regulator with his tank
it s so pitty that there are no adaptator available like crosman jdsman ! we could use externall paintball tank like thishttps://fr.aliexpress.com/store/product/QUBP-PCP-Paintball-High-Pressure-Air-Tank-4500PSI-HPA-Aluminium-Black-0-2L-Bottle-5-8/3055021_32816752286.html?spm=a2g0w.12010612.0.0.VxBLrF

it s not too long and 300bars support...we could remove original regulator to have more volume and achieve 33j but with a incredible shoot count!!


do you know if this kind of adaptator is available somewhere?it could be the best hunting gun with that

[Rallyshark]

Who was getting 33j on the Facebook group? I must have missed that one(which is entirely possible). I think it would be possible with the .22(since I got 20 fpe in .177), but I haven't seen where anyone has done it yet.

I think adding those parts you mentioned would take away from the fun of the pistol, and you might as well get something else at that point imo. Working on them is half the fun though

[titeuf007]

my friend has 27j after enlarge transfert port to 4mm and tune his hammer spring and reg..but reg has not enaugh air volume to increase power!
after shooting without his reg, his power has increase
and yes i speak about .22 caliber
for the spirit of the gun, it s same thing than other mod for benjamin crosman
the gun will have more shoot count,more power,better reg so it could be a hit for hunting mod
but i agree if you really want a short range pcp,it s not necessary!!
but with 0,2l 300bars tank and 30j, we could have an incredible  gun!

if you take an yes on my link you will see that the tank with reg has almost the same length than original cylinder..i have found smaller paintball reg too so if the length is the same than original tank, the look will not be too horrible

[Wayne52]

I did a Chrony test with mine after putting probably 1000 rounds through it with no additional adjustment since soon after I bought it.

[Sfttailrdr46]

I did a Chrony test with mine after putting probably 1000 rounds through it with no additional adjustment since soon after I bought it.

Nice Wayne I have mine since Wednesday and like it a great deal it is well balanced and I can't wait to get my Rocker1 LDC mounted. How much of a difference in the bark with the LDC mounted>

[Wayne52]

It's much quieter with the LDC Don.

[Sfttailrdr46]

15 -16 fpe from a lowly pistol is awesome power from what will soon become a very popular PCP pistol and the regulator makes for an even sweeter package. My cheapo red dot died so I will be picking up another slightly better one shortly. Open sights don't cut cut it for my tired old eyes.

[titeuf007]

15 -16 fpe from a lowly pistol is awesome power from what will soon become a very popular PCP pistol and the regulator makes for an even sweeter package. My cheapo red dot died so I will be picking up another slightly better one shortly. Open sights don't cut cut it for my tired old eyes.

you can have more power with little tune(tune you reg,open you transfert port

[SilentMatt]

A lot of the appeal of this gun is the small package, I had to remind myself that when I purchased a scope for it. I went with the smallest 4x I could find to keep it small and light. More magnification would be nice, but not really needed at the 60 yards max that I shoot it at.  I think 15 fpe with 30 shots is perfect for such a compact plinker, that's just my opinion though.

[Sfttailrdr46]

I will be mounting a light weight red dot sight most of my shooting will be at 30 yards or less

[Cathartes]

I will be mounting a light weight red dot sight most of my shooting will be at 30 yards or less

I just put a Millet red dot on mine with low profile Leupold rimfire rings. Cheap and easy, works great.

[sawtoothscream]

I'm using a nstar pistol scope on mine.   Takes some getting used to but not bad.     Wish I bought a 4 x though

[Rallyshark]

my friend has 27j after enlarge transfert port to 4mm and tune his hammer spring and reg..but reg has not enaugh air volume to increase power!
after shooting without his reg, his power has increase
and yes i speak about .22 caliber
for the spirit of the gun, it s same thing than other mod for benjamin crosman
the gun will have more shoot count,more power,better reg so it could be a hit for hunting mod
but i agree if you really want a short range pcp,it s not necessary!!
but with 0,2l 300bars tank and 30j, we could have an incredible  gun!

if you take an yes on my link you will see that the tank with reg has almost the same length than original cylinder..i have found smaller paintball reg too so if the length is the same than original tank, the look will not be too horrible

What is your friends name on there?  I want to look for his posts.  There is a good chance I have talked to him on there.  The one thing I see that may be an issue would be the diameter of the tank, and not so much the length.  A slight drop down block would likely be needed.  I'm sure it would be a fun project to do.  If you could make that work, then throw in a .25 barrel, it would really be nuts

[Rallyshark]

A lot of the appeal of this gun is the small package, I had to remind myself that when I purchased a scope for it. I went with the smallest 4x I could find to keep it small and light. More magnification would be nice, but not really needed at the 60 yards max that I shoot it at.  I think 15 fpe with 30 shots is perfect for such a compact plinker, that's just my opinion though.

Another vote for a 4X pistol scope here!  I love the Simmons I have on mine, and it is only around 8 oz., so it works well without adding too much weight.  I was using a red dot, but I just needed more precision once I realized how accurate these little buggers are.

[Wayne52]

Donny there's definitely a learning curve to a pistol scope, I think I'm finally getting to the point now where I can come right up on targets even in the dark woods in the morning.  The chipmunks I've been trying to thin out in that squirrel woods I hunt a lot have been really good training. I've got a bunch of tanned hides from them and red squirrels now that I'm thinking about making something out of.  I've got a couple of frozen ground hog hides I plan on using for something too, I think I'll just use hide only with them with no fur.   

[Rallyshark]

Donny there's definitely a learning curve to a pistol scope, I think I'm finally getting to the point now where I can come right up on targets even in the dark woods in the morning.  The chipmunks I've been trying to thin out in that squirrel woods I hunt a lot have been really good training. I've got a bunch of tanned hides from them and red squirrels now that I'm thinking about making something out of.  I've got a couple of frozen ground hog hides I plan on using for something too, I think I'll just use hide only with them with no fur.   

Very cool Wayne!  Once you get used to using a pistol scope, they are pretty awesome vs sights or a dot   Now I see why you didn't want to use the "nasty" hunting pellets!

[Jimr65]

Who was getting 33j on the Facebook group? I must have missed that one(which is entirely possible). I think it would be possible with the .22(since I got 20 fpe in .177), but I haven't seen where anyone has done it yet.

I think adding those parts you mentioned would take away from the fun of the pistol, and you might as well get something else at that point imo. Working on them is half the fun though

Andreas  Stella 31.54 off a 1.02g pellet

[Rallyshark]

Who was getting 33j on the Facebook group? I must have missed that one(which is entirely possible). I think it would be possible with the .22(since I got 20 fpe in .177), but I haven't seen where anyone has done it yet.

I think adding those parts you mentioned would take away from the fun of the pistol, and you might as well get something else at that point imo. Working on them is half the fun though

Andreas  Stella 31.54 off a 1.02g pellet

I just saw that last night!  That is a 15.8-ish grain pellet.  I had missed that when he posted it, but I commented on it last night.  I've talked to him quite a few times about his tuning.  I think he basically did all the stuff I've done, with exception to the regulator, which he removed it.  Thanks for the heads up, I figured that was who it was