Author Topic: hand pumps are now 72.00 shipped (Read 26050 times))

Rob M · « **Reply #80 on:** March 06, 2017, 04:38:42 PM »

internally im pretty sure theyre all very similar.. once you rebuild one , you can do them all

Hotled · « **Reply #81 on:** March 09, 2017, 09:26:10 AM »

Do not order from echo_mall . They never sent my pump and the tracking info was never scanned by FedEx. They are stalling on the refund and want me to wait 3 weeks for the pump that was shipping from California. I had to escalate the issue with PayPal.

lennyk · « **Reply #82 on:** March 10, 2017, 08:59:07 PM »

Been using mine a bunch, have never opened up one of these but it appears to have oil inside
since with regular use there is a fair bit of oil coming down the shaft from inside
the oil stays pretty clean and not turning a black mess, I guess as it is stainless steel.

Only once did it seem to have any moisture from the bleedout.

It is actually about the same or slightly easier than pumping my road bike tires to 110psi with a
joe blow sport stirrup pump

Hawkeye51 · « **Reply #83 on:** March 10, 2017, 11:59:59 PM »

Just bought one from "digitalzoneproducts". Offer of $63.00 accepted. This included shipping. Came in a black plastic hard case with a spare set of o-rings. I contacted seller and asked about thread type, explaining that I needed to purchase an adapter for my gun & they quickly replied they would contact manufacturer but asked if I would accept compensation for me to "fix" locally. Can't ask for much more than that.

Rob M · « **Reply #84 on:** March 11, 2017, 12:38:58 AM »

Wow, thats crazy.. good to hear

Artie · « **Reply #85 on:** March 11, 2017, 07:26:19 PM »

I never considered asking about threads after reading here before purchasing they were BSPP. And they are. So now I'm nut rolling decisions on the cheapest, easiest conversion. My separate purchase of a stainless BSPP (G) to NPT adapter was a wash, the BSP side was very poorly machined, no sealing no way.

Rob M · « **Reply #86 on:** March 11, 2017, 07:39:14 PM »

someone in this thread got an entire hose for 20 bux i think

Wayne52 · « **Reply #87 on:** March 12, 2017, 12:20:24 AM »

I'm hoping the Chinese vendors follow the same suite in coming way down on price for clones of the air compressors as they have for the hand pumps

Rob M · « **Reply #88 on:** March 12, 2017, 12:22:21 AM »

Quote from: Wayne52 on March 12, 2017, 12:20:24 AM

I'm hoping the Chinese vendors follow the same suite in coming way down on price for clones of the air compressors as they have for the hand pumps

they have that one compressor now for 300 or so shipped from china.. apparently , its good enough to fill guns , but not tanks .. i forgot the name

betapotato · « **Reply #89 on:** March 12, 2017, 01:48:19 AM »

Quote

they have that one compressor now for 300 or so shipped from china.. apparently , its good enough to fill guns , but not tanks .. i forgot the name

It cost 200 bucks in china.

Rob M · « **Reply #90 on:** March 12, 2017, 03:54:36 AM »

Quote from: Donut 2994 on March 12, 2017, 01:48:19 AM

Quote
they have that one compressor now for 300 or so shipped from china.. apparently , its good enough to fill guns , but not tanks .. i forgot the name
It cost 200 bucks in china.

whats it called, i forget.. i think shipping is about 100

chibasan · « **Reply #91 on:** March 12, 2017, 03:23:57 PM »

Quote from: Rob M on March 12, 2017, 03:54:36 AM

Quote from: Donut 2994 on March 12, 2017, 01:48:19 AM
Quote
they have that one compressor now for 300 or so shipped from china.. apparently , its good enough to fill guns , but not tanks .. i forgot the name
It cost 200 bucks in china.

whats it called, i forget.. i think shipping is about 100

I believe that one described is called the Tuxing compressor. There are a couple of listings on Aliexpress.

Rob M · « **Reply #92 on:** March 12, 2017, 04:53:02 PM »

thanks.. seems to one thing needed to make it a tank filler is a cooling system , Homebrew.

betapotato · « **Reply #93 on:** March 12, 2017, 10:58:24 PM »

that one only costs 100 bucks in china. The shipping for each one is well below $100 bucks.

Rob M · « **Reply #94 on:** March 12, 2017, 11:09:34 PM »

https://wholesaler.alibaba.com/product-detail/4500psi-300-bar-high-pressure-electrical_60582096827.html

betapotato · « **Reply #95 on:** March 13, 2017, 12:17:08 AM »

Quote from: Rob M on March 12, 2017, 11:09:34 PM

https://wholesaler.alibaba.com/product-detail/4500psi-300-bar-high-pressure-electrical_60582096827.html

I mean the cost to make from the manufacturer directly is 100 bucks. Everything in Aliexpress has been bumped up. The shipping cost, if in bulk is well below $100 since it only takes 150 dollars to ship 1 cubic meter of goods without weight limitations.

Rob M · « **Reply #96 on:** March 13, 2017, 12:59:29 AM »

oh, i had no clue you could buy direct.. pretty cool, ill have to google it

PharmD · « **Reply #97 on:** March 13, 2017, 01:58:29 PM »

I'm going to buy a Benjamin discovery today - my first PCP. Will I need any special adapters to use the pump?

Rob M · « **Reply #98 on:** March 13, 2017, 03:02:41 PM »

a few guys said the foster fits, others said no.. so u may need a female foster for the hose

Rob M · « **Reply #99 on:** March 13, 2017, 03:03:23 PM »

best bet, go back into the thread and see what other guys did

Thank you to our advertisers!

hand pumps are now 72.00 shipped

Author Topic: hand pumps are now 72.00 shipped (Read 26050 times))