Author Topic: Do any of you consider UNDER 1/2 MOA good?! LOL! (Read 4599 times))

Tofazfou · « **on:** December 11, 2016, 07:33:53 PM »

Yeah, just not sure how to feel about these groups as witnessed by probably 10 people yesterday! So I need your opinions.......lol!

YEPPERS, THIS GROUP MEASURES .490" CTC and is easily covered with a quarter (.955" OD)

Next up is the very horrible LEE BULLETS. These guys still managed a respectable 5/8".

Last but not least, another cast bullet tested and proven to shoot under at least MOA. This group was not measured by calipers as I lost the target on the way home but, again, still covered by a quarter. And was shot twice on the same target at same fill pressure:

Now, before everyone gets off on their high "HOW TO SHOOT no less than 10 shots into a group to tell consistency and accuracy" rheteric (sp?), these groups were shot back to back with 3 different bullets at the same fill pressures. Also, this gun is UNFINISHED and is still in the testing mode. When it is done, i don't expect much to change. We shall see though when that day soon comes.

Oh yeah! BTW, 2 things! 1, this is a hunting gun and not a target/bench gun. These groups are 100 yards and NOT 50-60-75. More details to come as the questions roll in.

Tofazfou
https://www.youtube.com/user/tofazfou/videos
http://tofazfou.blogspot.com/

Hobbyman2007 · « **Reply #1 on:** December 11, 2016, 09:23:08 PM »

Looks like a deadly combo. Not one but three different slugs shooting that well . I'm impressed , now let's see some more of the long range shooting . Just for a reference , what are you sizing to ? + or - bore size.
Thanks .

aceflier · « **Reply #2 on:** December 11, 2016, 09:24:16 PM »

What is this trickery you speak of? Looks good to me!

robertr · « **Reply #3 on:** December 11, 2016, 10:01:06 PM »

That's nice shooting. I did get 4 out of 5 half inch center to center, the fifth shot made it three quarter inch. With my Scorpion SE .22.

Tofazfou · « **Reply #4 on:** December 11, 2016, 10:17:33 PM »

Quote from: Hobbyman2007 on December 11, 2016, 09:23:08 PM

Looks like a deadly combo. Not one but three different slugs shooting that well . I'm impressed , now let's see some more of the long range shooting . Just for a reference , what are you sizing to ? + or - bore size.
Thanks .

+.0003 which is about normal for all my long range guns.

Tofazfou · « **Reply #5 on:** December 11, 2016, 10:21:42 PM »

Quote from: aceflier on December 11, 2016, 09:24:16 PM

What is this trickery you speak of? Looks good to me!

Lol, just testing a few ideas i had for a rig Doug is helping me put together. Built on the NEW Epox Badger platform

Quote from: robertr on December 11, 2016, 10:01:06 PM

That's nice shooting. I did get 4 out of 5 half inch center to center, the fifth shot made it three quarter inch. With my Scorpion SE .22.

Gotta love BSA air rifles. Wish i never would have sold mine! Thanks for posting.

nielsenammo · « **Reply #6 on:** December 11, 2016, 10:44:45 PM »

That one bullet looks awsome, nice job on the design.

KnifeMaker · « **Reply #7 on:** December 11, 2016, 10:54:28 PM »

I think the next time we talk on the phone, I'm gonna reach thru it and SLAP Ya for just asking such a question!
And ONLY over the phone, because your a Leeetle bit bigger than me. And a LOT Younger!

Knife

Tofazfou · « **Reply #8 on:** December 11, 2016, 11:58:17 PM »

Quote from: nielsenammo on December 11, 2016, 10:44:45 PM

That one bullet looks awsome, nice job on the design.

LMBO. Geez, Thanks! I worked hard on it.....lol!

Tofazfou · « **Reply #9 on:** December 12, 2016, 12:00:46 AM »

Quote from: KnifeMaker on December 11, 2016, 10:54:28 PM

I think the next time we talk on the phone, I'm gonna reach thru it and SLAP Ya for just asking such a question!
And ONLY over the phone, because your a Leeetle bit bigger than me. And a LOT Younger!

Knife

But Mike, you never gave me your answer......LMBO!

William · « **Reply #10 on:** December 12, 2016, 12:18:17 AM »

Hunting rifle and not a bench target gun....... HMMMM must going after Chipmunks and head shots nuttin under a hundred only

Nice groups that's for sure, nice work cant wait until your finished with it... looking pretty good.

William

rkr · « **Reply #11 on:** December 12, 2016, 01:11:13 AM »

.375? Some details of the gun please.

MJP · « **Reply #12 on:** December 12, 2016, 01:21:23 AM »

Looks good Cedric, I'm quessing .338 although bullets look a bit short for that.
How about some specs, like barrel length and twist rate, velocity?
No point shooting more than 3 when testing, the groups aren't getting any smaller after the 3 shots.
Marko

William · « **Reply #13 on:** December 12, 2016, 02:05:01 AM »

Is that the .40 Cal Badger???

Horatio · « **Reply #14 on:** December 12, 2016, 02:23:00 AM »

Quote from: Tofazfou on December 11, 2016, 07:33:53 PM

Yeah, just not sure how to feel about these groups as witnessed by probably 10 people yesterday! So I need your opinions.......lol!

YEPPERS, THIS GROUP MEASURES .490" CTC and is easily covered with a quarter (.955" OD)

Next up is the very horrible LEE BULLETS. These guys still managed a respectable 5/8".

Last but not least, another cast bullet tested and proven to shoot under at least MOA. This group was not measured by calipers as I lost the target on the way home but, again, still covered by a quarter. And was shot twice on the same target at same fill pressure:

Now, before everyone gets off on their high "HOW TO SHOOT no less than 10 shots into a group to tell consistency and accuracy" rheteric (sp?), these groups were shot back to back with 3 different bullets at the same fill pressures. Also, this gun is UNFINISHED and is still in the testing mode. When it is done, i don't expect much to change. We shall see though when that day soon comes.

Oh yeah! BTW, 2 things! 1, this is a hunting gun and not a target/bench gun. These groups are 100 yards and NOT 50-60-75. More details to come as the questions roll in.

Tofazfou
https://www.youtube.com/user/tofazfou/videos
http://tofazfou.blogspot.com/

Great shooting! Eh... 10 shot groups, I only get one at an animal, after 4 I forget what I was doing anyway. How is that the guns fault?

QVTom · « **Reply #15 on:** December 12, 2016, 02:30:54 AM »

Very nice Cedric! Are you shooting tethered or free? Funny how the long range calibers keep getting BIGGER

Tom

nielsenammo · « **Reply #16 on:** December 12, 2016, 11:05:12 AM »

I was out there with Cedric and a whole group of us shooting. You should have seen Cedric all excited about his gun like a kid on Christmas. It is not just the gun, Cedric is a very good shot and puts a lot of time and effort into this hobby. Doug Noble put his expertise in the build, Cedric with dedication: expect no less.

Prouzy · « **Reply #17 on:** December 12, 2016, 11:15:03 AM »

Quote from: nielsenammo on December 12, 2016, 11:05:12 AM

It is not just the gun, Cedric is a very good shot and puts a lot of time and effort into this hobby. Doug Noble put his expertise in the build, Cedric with dedication: expect no less.

Winning combo right there. Look forward to hearing more. Nice work!

rsterne · « **Reply #18 on:** December 12, 2016, 11:40:05 AM »

Well the only Lee Mould I can see that is 250 gr. is .375 cal.... Nice shooting, Ced, especially with 3 different bullets.... Looks like you have another winning combination....

Bob

rifle50 · « **Reply #19 on:** December 12, 2016, 12:25:55 PM »

Cedric, Looks like it is working? What is it? Where are the pics of gun? Inquiring minds want to know?

Carl

Thank you to our advertisers!

Do any of you consider UNDER 1/2 MOA good?! LOL!

Author Topic: Do any of you consider UNDER 1/2 MOA good?! LOL! (Read 4599 times))