FWB 602 Parts?

[Mtl_Biker]

I broke my FWB 602.

SIGH

I wanted to install a scope on it just so that I could use the rifle for our GTA 50 foot challenge.  It's not a springer so I cannot compete in the springer class, and even though it's not a PCP, I must enter it in the PCP class.  And there I'm up against guys shooting 200/200 scores and they all have scopes.  With the diopter sight I can hardly see the target properly at that distance so it's almost impossible to get perfect scores (without mounting a scope).  The best I've managed is 195/200 with 2x.

So I got a new loading gate and cut it down (making a short loading gate) and was trying to remove the old one and the piece that the parts diagram calls a "Joint Bar" broke right at the bottom where the lower pin goes through.  My usual source for FWB parts (Cibles/Target Canada) is away on holiday and just before they left they told me it would take 4-5 weeks to get a replacement.  Further complicating the issue is the fact that FWB lists SEVEN different sizes for this piece WITHOUT specifying what the sizes actually are.  Apparently it's the hole size that differs and getting the wrong one wouldn't allow the pins to fit.  The part is listed as 1780.38x.1, with the "x" ranging from 2 to 8.  (I have measured the size of the pins used in mine and I get 23mm x 3mm and 24.1mm x 3.97mm.)

Here's what the piece looks like:







We've already tried Crazy Glue as well as epoxy to make a temporary fix but nothing seems to hold.  The break is also in the wrong spot for inserting a reinforcing pin.

Any ideas where I might be able to source this piece quickly?

Thanks for any help...

[Roadworthy]

You can try J B Weld which probably won't work either.  If it's a big rush you could talk to a machinist.