Let's see the Discovery rifle builds!

[Dairyboy]

Not sure if there is a thread on this already if so then search is failing me but let's see some of your disco builds! Want some ideas on one. I built a .177 with a BNM and Mrod trigger and bought a .22 with a BNM and a DPV recently. Now I have a stock .177 disco that's been modded for 3000psi fills and a tuned up trigger and not sure where I wanna go with it so let's see them!

[rsterne]

How about my Disco Double....



Homemade repeater breech that accepts MRod mags. and the gun is a rear cocker.... .25, .30, and .35 cal TJ's 25" barrels, with a 7/8" CF shroud applying tension to the barrel and a Hatsan Air Stripper  the muzzle.... The stock is a Boyd's Blaster in Forest Camo.... Trigger is MRod Gen1.... Here are the best tunes....



Future plans include a Cothran Powerhouse Valve which should allow me to go back to cocking with the bolt.... Maximum power achieved in .357 cal was 192 FPE....

Bob

[rrdstarr]

I can't find pictures of my "Joe Hickey" stocked Discovery on my drive.  But it is a thing of beauty!
It's had the trigger mod done to it and is .22.

[degriz (AKA) Lou Hauburger]

Built these for my sons, about 5 years ago.  Disco's which I did some work on, can't remember the internal work but the rifle is a tack driver.

[Dairyboy]

Beautiful guns guys! Leaning towards a Boyd's pro varmint stock in pepper laminate I'm thinking will look great. Keep them comin!

[strever]

here's mine

[Matt15]

here's mine

Is that gun .25 cal? Seems like I remember you had a .25 cal disco. What is the FPS?

[strever]

yes it is the 25 cal. you have a good memory Matt
it has been so long since i got it out of the safe i don't remember
seems it was somewhere in the low 800's ?
and not too many more shots then one Mrod cartridge in shot count
memory gets pretty bad at my age

Is that gun .25 cal? Seems like I remember you had a .25 cal disco. What is the FPS?

[Geoff]

Disco double, BNM breech and shroud and mrod trigger group




http://www.gatewaytoairguns.org/GTA/index.php?action=media;sa=media;in=2699


I cant seem to post an image saved on GTA anymore.  photobucket images work just not ones saved on GTA

[grimeszee]

Here is my .177 HFT build I did June of 15

[strever]

GTA doesn't identify it as an image. your image [Discownewstock_sm.jpg] is now only 2699 and can only be viewed as a link
maybe a complaint to the web master is needed

Disco double, BNM breech and shroud and mrod trigger group
http://www.gatewaytoairguns.org/GTA/index.php?action=media;sa=media;in=2699
I cant seem to post an image saved on GTA anymore.  photobucket images work just not ones saved on GTA

[Dairyboy]

Wow some more beautiful discos. Some of the best stocks I've seen on these discos I'm definitely going with a different stock for sure. Most guys like BNM I see though not many LDCs.

[Old Corps]

Yessir, some VERY nice looking Discos!

Ed

[Cathartes]

Here's my two Disco builds. Total opposites.

[Wayne52]

They're all beauties!!!! My disco is still bone stock, stiil a very nice shooter though!!  I wish I had on hand access to a nice machine shop, maybe I'll pic up a small lathe some day, they're fairly reasonable

[Monkeydad1969]

Here are mine, plus a couple of 2260's:

The Discos are .22 and the one in the Boyd's Pro Varmint stock is running a DPV (Disco Power Valve) regulated to 1800psi with a Huma reg., courtesy of Air Superiority (thanks Nick). 
The second is running a stock valve and 18" barrel.

The 2260's are the .25 Can Gun (2560) and the .30 (3060).

[Monkeydad1969]

Not sure if there is a thread on this already if so then search is failing me but let's see some of your disco builds! Want some ideas on one. I built a .177 with a BNM and Mrod trigger and bought a .22 with a BNM and a DPV recently. Now I have a stock .177 disco that's been modded for 3000psi fills and a tuned up trigger and not sure where I wanna go with it so let's see them!

If you keep the new .177 with the stock valve, reg it for shot count.  Will make a great plinker.  Guess I should go about getting my .177 Maximus (not saying what I plan for that one).

Joe

[degriz (AKA) Lou Hauburger]

This was one of my first builds, before I got into doing the woodwork.

[RVaughn]

How about my Disco Double....



Homemade repeater breech that accepts MRod mags. and the gun is a rear cocker.... .25, .30, and .35 cal TJ's 25" barrels, with a 7/8" CF shroud applying tension to the barrel and a Hatsan Air Stripper  the muzzle.... The stock is a Boyd's Blaster in Forest Camo.... Trigger is MRod Gen1.... Here are the best tunes....



Future plans include a Cothran Powerhouse Valve which should allow me to go back to cocking with the bolt.... Maximum power achieved in .357 cal was 192 FPE....

Bob

That's one sexy disco Bob!!!  And good power to boot! what does that rig weigh in at unscoped?

[Matt15]

yes it is the 25 cal. you have a good memory Matt
it has been so long since i got it out of the safe i don't remember
seems it was somewhere in the low 800's ?
and not too many more shots then one Mrod cartridge in shot count
memory gets pretty bad at my age

Is that gun .25 cal? Seems like I remember you had a .25 cal disco. What is the FPS?

Thanks!