target boards

[woodwalker]

Just a thought  , What target boards do you use, and how you attach you targets.
I am always looking for new ideas...

Photos please..

[marty2]

I print my targets on 110 weight paper(card stock) then staple that to a piece of corrugated cardboard. After all that I clip the target to one of my pellet traps or a rectangular metal frame that I have.

[Roadworthy]

I just staple targets to a short poplar fireplace log.  When it gets too chewed up I replace it.

[ac12]

Masking tape onto the target and cardboard backer.

[sixshootertexan]

I have a wood box full of rubber mulch with a piece of that plastic cardboard stuff that slides into a groove. I then tape my targets to it.

[Hoosier Daddy]

I use a couple of those black binder clips, attach them with pan head sheet metal screws to a 3/4 piece of plywood that is cut and drilled to fit a metal Realtor sign frame. Holds two 8-1/2x11 home printed targets.
All material is re-purposed stuff = $0
When I start blowing through the plywood in the center I put the Realtor sign on the back-side to contain the pellets until the wood gets replaced.