Author Topic: H95 - hex size for muzzle break? (Read 1571 times))

bebanovich · « **on:** January 03, 2016, 05:51:07 PM »

I don't seem to have an Allen wrench to fit the muzzle break on the Hatsan 95. Anyone happen to know what size I should grab from the hardware store?

AudiS4 · « **Reply #1 on:** January 04, 2016, 05:16:36 PM »

It's only pressed/hammered in place. No screw holding it on.

bebanovich · « **Reply #2 on:** January 04, 2016, 06:30:34 PM »

Quote from: AudiS4 on January 04, 2016, 05:16:36 PM

It's only pressed/hammered in place. No screw holding it on.

I'm guessing there is a difference between mine and the QE model. Mine looks like the one below. My old, blurry eyes perceive a set screw that I have a compulsive desire to snug down.

AudiS4 · « **Reply #3 on:** January 05, 2016, 08:23:57 PM »

Ahaaaa that wasn't on my when I removed my muzzlebreak. I have a self-made QE, with a shortened barrel and then a AT 44 moderator fitted. It's a standard 95, bought a Vortex piston, and then the tune and removal of iron sights.

Thank you to our advertisers!

H95 - hex size for muzzle break?

Author Topic: H95 - hex size for muzzle break? (Read 1571 times))

bebanovich

H95 - hex size for muzzle break?

AudiS4

Re: H95 - hex size for muzzle break?

bebanovich

Re: H95 - hex size for muzzle break?

AudiS4

Re: H95 - hex size for muzzle break?