Author Topic: Why is it so hard... (Read 7247 times))

twigboy · « **Reply #20 on:** December 21, 2015, 10:09:31 AM »

Quote from: BrokeWinger on December 21, 2015, 09:15:21 AM

Quote from: twigboy on December 21, 2015, 02:03:06 AM
Quote from: BrokeWinger on December 20, 2015, 11:26:34 PM
Yeah I know kids frequent the forum. Yes I know some folks don't want their kids exposed to certain colors of the language rainbow (as if). I also know that it is THEIR job to filter/teach their children what is appropriate language for them to use and what isn't. It is not my responsibility to filter/teach their children.

Attitudes like this gets people thrown out of my house. Just a complete lack of respect.

Being in someone's home is completely different from an internet forum.

You still here? I wasn't necessarily referring to the internet. Or kids. You show a lack of respect that would permeate beyond the internet.

ezman604 · « **Reply #21 on:** December 21, 2015, 10:13:39 AM »

I opened the 2400 parts and owner's manual link fine. I tried to copy the pages and post them last night but even as single pages the size was over the limit for posting here. I'll load them as an image and hopefully they will work. But the link does work.

https://support.crosman.com/hc/en-us/articles/203360704-2240-Owner-s-Manual-EVP-1999-Present-

ezman604 · « **Reply #22 on:** December 21, 2015, 10:25:39 AM »

ezman604 · « **Reply #23 on:** December 21, 2015, 10:32:26 AM »

Quote from: BrokeWinger on December 21, 2015, 09:15:21 AM

Being in someone's home is completely different from an internet forum.

We have been building this "place" for several years. So, to the casual visitor, it may just be another forum on the internet. But to many of us, it IS our home we have worked hard to built.
As lame as some may think that is...it's a fact.

mobilehomer · « **Reply #24 on:** December 21, 2015, 12:17:55 PM »

Home is where the hearts is! And when you're on some else's turf - their house, their rules.
I, too, have experienced the non-opening PDF from Crosman. I didn't get mad, I just looked elsewhere for the info. Starting here, the best forum on the net!!!

sixshootertexan · « **Reply #25 on:** December 21, 2015, 12:35:29 PM »

There is a couple websites that sell nearly every 22XX parts if you are willing to pay their prices. Or you can just Google images for a 2240 parts diagram.

K.O. · « **Reply #26 on:** December 21, 2015, 12:49:50 PM »

So very very entitled you are (in my best Yoda voice)... I guess its so much easier to be Richard Cranium who can not figure out how to get his frustration across without saying I do not need to follow the rules...

hhm BYE BYE no skin off my back... and you would not be welcome in many homes...

ezman604 · « **Reply #27 on:** December 21, 2015, 12:54:44 PM »

Folks, GTA is better than this. Please do not fan the flames. Help was offered....
Respect other opinions....even when it becomes tough to do so.
Thanks.

K.O. · « **Reply #28 on:** December 21, 2015, 01:07:07 PM »

Sorry, there is just a certain personality type that brings out my inability to grow up...

I am willing to edit it... or leave it as an example of hey let the Moderators do their job...

Dez I hope your Holidays are going well mine are...

My daughter and grandson came for a visit, he is already 24" tall and smiled at me as soon as he saw me...

bradclark · « **Reply #29 on:** December 21, 2015, 05:26:19 PM »

I believe that shipping for Crosman is $4.00 per item. Order 5 tiny parts will cost $20 in shipping.

Brad

ezman604 · « **Reply #30 on:** December 21, 2015, 05:41:49 PM »

Unless they have changed policy since my last order, it's $4 shipping total, not per part.

K.O. · « **Reply #31 on:** December 21, 2015, 05:43:33 PM »

Order 5 tiny parts at one time and shipping is $4...

Order 20 bigger parts like 24" barrels at once and shipping is $4 at least that is how it has been for me...

all the parts that make a 13xx trigger/gripframe all the parts to make an MK1322 from MK177 pump parts etc... $4 per order...

I am very thankful that they sell parts it probably is not a $$ maker for them except as good C.S. helps sales in the long run...

Some of the rifles they sell may need some tuning to be their best, but I can still get parts for most of their products... and not just the recent products.

ztirffritz · « **Reply #32 on:** December 21, 2015, 06:40:24 PM »

There's actually a link at that top of this page for the GTA Library. Quite a few manuals and parts lists are there too:
http://www.gatewaytoairguns.org/GTA/index.php?action=library

Rocker1 · « **Reply #33 on:** December 21, 2015, 07:03:10 PM »

Im around boss. David

BrokeWinger · « **Reply #34 on:** December 22, 2015, 12:56:50 AM »

Quote from: ezman604 on December 21, 2015, 10:13:39 AM

I opened the 2400 parts and owner's manual link fine. I tried to copy the pages and post them last night but even as single pages the size was over the limit for posting here. I'll load them as an image and hopefully they will work. But the link does work.

https://support.crosman.com/hc/en-us/articles/203360704-2240-Owner-s-Manual-EVP-1999-Present-

Wasn't the 2400...I was looking for the fore stock on a synthetic P-rod.

BrokeWinger · « **Reply #35 on:** December 22, 2015, 01:05:21 AM »

Quote from: ztirffritz on December 21, 2015, 06:40:24 PM

There's actually a link at that top of this page for the GTA Library. Quite a few manuals and parts lists are there too:
http://www.gatewaytoairguns.org/GTA/index.php?action=library

While forum libraries are a useful resource, I prefer to get pricing directly from the manufacturer's website. Therefore assuring me that I have the current price. I have no idea when the files in a given forum's library were...or were not updated.

BrokeWinger · « **Reply #36 on:** December 22, 2015, 01:06:41 AM »

Ezman,

Thank you for your efforts, they are appreciated.

K.O. · « **Reply #37 on:** December 22, 2015, 01:55:25 AM »

Quote from: BrokeWinger on December 22, 2015, 01:05:21 AM

Quote from: ztirffritz on December 21, 2015, 06:40:24 PM
There's actually a link at that top of this page for the GTA Library. Quite a few manuals and parts lists are there too:
http://www.gatewaytoairguns.org/GTA/index.php?action=library

While forum libraries are a useful resource, I prefer to get pricing directly from the manufacturer's website. Therefore assuring me that I have the current price. I have no idea when the files in a given forum's library were...or were not updated.

Prices have fluctuated a bit over the past years so you have to call to get pricing...

but they are pretty reasonable except o-rings There was a minimum price per item... 1.15 last order... so get O-rings elsewhere since it is not hard usually.

avator · « **Reply #38 on:** December 22, 2015, 02:06:10 AM »

Try Steves Pages. Lots of diagrams there.
Plenty of places on the internet for kids to get.. ummm.. educated. GTA has a different agenda.
Dave, you are one awesome dude. Thank You

BigTinBoat · « **Reply #39 on:** December 22, 2015, 08:18:00 AM »

Quote from: BrokeWinger on December 22, 2015, 12:56:50 AM

Quote from: ezman604 on December 21, 2015, 10:13:39 AM
I opened the 2400 parts and owner's manual link fine. I tried to copy the pages and post them last night but even as single pages the size was over the limit for posting here. I'll load them as an image and hopefully they will work. But the link does work.

https://support.crosman.com/hc/en-us/articles/203360704-2240-Owner-s-Manual-EVP-1999-Present-

Wasn't the 2400...I was looking for the fore stock on a synthetic P-rod.

What do ya know.................opened in a flash.....I just googles Benjamin Prod Schematic and it was the very first link

http://www.crosman.com/pdf/manuals/BP2220-EVP%20&%20PL.pdf

Thank you to our advertisers!

Why is it so hard...

Author Topic: Why is it so hard... (Read 7247 times))

BigTinBoat