QB valve removal - How to?

[PackingHeat]

How do I remove the QB79 valve. When I get it stripped down to where I have access to the slotted aluminum cap and valve retention screw, how do i get the valve out. I removed the retention screw but can't seem to get the valve to slide out. What am I missing here? Is there something else retaining it other than the single screw or is it just a really tight fit. What is the best procedure?

[Bentong]

Try here >> http://www.gatewaytoairguns.org/GTA/library/Charlie_QB-78_Tune.htm

[PackingHeat]

Try here >> http://www.gatewaytoairguns.org/GTA/library/Charlie_QB-78_Tune.htm

Thanks for the link. I could not remember that this was in the library and not a post.

[dryanw]

You can pick up a 8 inch flathead screwdriver at Harbor Freight for about 3 bucks that will remove the valve pretty well.

[mikeiniowa]

or you can use a 3/4inch by 1/8 inch by 8 inch piece of strap steel....