So what did you Order / Receive today ? (to feed the "Beast" that lives within)

[Firewalker]

You got more toys on yours than I have on mine! 

[Madd Hatter]

I do have to say that I really like the sights on the Hatsan 125. If my eye sight was 20 years younger I'd probably not even think of scoping it.

This is the 1 I finally received yesterday.



Seems to have good glass with no distortions at the edges at 9x. Plenty bright for my eyes. Haven't been able to sight it in yet as it's been windy since I got it mounted. I mounted it on a chicom ZR knock off so I'll see how well it does without modding it.

[Spacebus]

You got more toys on yours than I have on mine! 

Mine weighs in at 5 lbs 6 oz as pictured. A scope would probably push it up to 6 lbs 4ish oz. I thought about just going with CF tube and no accessory rail, but I think the barrel is too long for that to be taking it into the woods like that. I wish the Chaser drop block had a bigger air passage for more plenum volume. I like the length of the Chaser tube better.

that kit is awesome, i plan to get something similar myself for a mid-power .25 rig

the 0.25 bottle got here from AliExpress and weighs at 600g(does that sound right for a 4.5k bottle?)

with the pin valve and reg it's 935g, the bandit with folding stock is at 1kg and there's still a drop block and optics to add

speaking of which, customs refused my $30 scope("dang" world order)
so i took advantage of an Ali promo and purchased 3 scopes in 12 smooth installments xD

don't provoke a hoarder

The BR moderator, folding stock, accessory rail, and grip weigh in at 638 grams and the Chaser Rifle stock and barrel band weigh in at 683g. So a slight weight savings. With my CF tube setup it came out to be exactly the same, 2,438g. I can see some distortion in the accessory rail on the barrel band from the tension, but hopefully it holds up. I carried it in the woods today walking with my wife and dog and it was very pleasant folded. Didn't see any game animals on the walk, but it was making tight groups before we headed out. I do have a 10x1mm o ring on one of the barrel shoulders to help everything stay centered. The CF tube is a tight fit, so I'm not too worried about POI shift. I ordered another set of CF tubes to setup the Stormrider the same way, even though I just use it for plinking.

[Back_Roads]

I do have to say that I really like the sights on the Hatsan 125. If my eye sight was 20 years younger I'd probably not even think of scoping it.

This is the 1 I finally received yesterday.



Seems to have good glass with no distortions at the edges at 9x. Plenty bright for my eyes. Haven't been able to sight it in yet as it's been windy since I got it mounted. I mounted it on a chicom ZR knock off so I'll see how well it does without modding it.

The China ZR mount on my Hatsan 95 is still right on, the thing to get used to , is when you pick the gun up and hear it rattle, I always do a double take then remember the mounts "design" LOL
 I have that Simmons scope on my Sentry 302-3 it does have nice glass and adjust well for its price point.

[Spacebus]

I do have to say that I really like the sights on the Hatsan 125. If my eye sight was 20 years younger I'd probably not even think of scoping it.

This is the 1 I finally received yesterday.



Seems to have good glass with no distortions at the edges at 9x. Plenty bright for my eyes. Haven't been able to sight it in yet as it's been windy since I got it mounted. I mounted it on a chicom ZR knock off so I'll see how well it does without modding it.

I wish that scope had mil-dots, otherwise nice price!

[kbstingwing]

my used from AoA Optisan MTC Viper 4-16x50 scope came in just now, very nice, in excellent condition, and a great deal, I'm going to mount this on my Prod.... , just kidding, maybe on the Uragan or the Prophet, they're both good longer range guns....

[Matchstickshooter]

 got some batteries for the Red Dots..

[2A Georgia]

Received the pivot pin upgrade for project 1322.  Went to Wallyworld and got steel wool for the air-tube polish.  Waiting patiently for the Steel Breech from Alliance.  I have a package of auto A/C O-rings will have to check the garage to see if they're polyurethene and look again for my lithium grease that I swear is in the garage with the "car chemicals"..looked really hard at the Monstrum 3X prismatic for the project 1322 but didn't put it in a cart yet...lol

The Buck Rail clamp on scope mount is now up for trade.  Full disclosure one of the four screws is somewhere on the floor in the mancave.  Looking to trade for a tin of .22 or .177 that you tried and didn't like for your gun.  We each pay shipping (I'm 30189).  Be sure you shoot enough of the pellets to make the trade fair for the missing screw...lol  Or I would trade for a Pumpmaster 760 Hammer Spring (close to the same pricepoint).

[Back_Roads]

 I would pass on the Monstrum the parallax is too far for lower power air guns

[Hoosier Daddy]

"Idle Hands are the Devils Workshop"
I ordered handles for my new NOE 458-244-FN-CA4 mold.
Then contacted fellow member SpiralGroove and bought one of his muzzle brakes for my FWB 124.
 

[Matchstickshooter]

delete

[2A Georgia]

I would pass on the Monstrum the parallax is too far for lower power air guns

That's good information once again from senior members on the forum.  It was going to go on the project 1322 so yes close range.  Looks like I will be sending the TRS-25 back to Bushnell to fix the battery cover threads or dealing with memsahib if I talk myself into the Vortex Spitfire 3X

[Back_Roads]

I would pass on the Monstrum the parallax is too far for lower power air guns

That's good information once again from senior members on the forum.  It was going to go on the project 1322 so yes close range.  Looks like I will be sending the TRS-25 back to Bushnell to fix the battery cover threads or dealing with memsahib if I talk myself into the Vortex Spitfire 3X

Look into the 5x24  From Immersive Optics, https://airgunarcheryfun.ca/immersive-optics-5x24-mdr/ Much more air gun friendly. Sorry Vortex https://airgunarcheryfun.ca/immersive-optics-5x24-mdr/

[Nvreloader]

A new Dragon Fly II 22 cal rifle.

[Hoosier Daddy]

Whoopsie... already posted.
Guess I am excited. 

[Insanity]

2 things today...
Handles for my NOE mold because the Lee handles don't fit.
AND a Muzzle Brake for my vintage FWB 124 from our fellow member Spiral Groove.

What handles?

[Hoosier Daddy]

2 things today...
Handles for my NOE mold because the Lee handles don't fit.
AND a Muzzle Brake for my vintage FWB 124 from our fellow member Spiral Groove.

What handles?

Theirs...
https://noebulletmolds.com/site/product-category/mould-handles/

[Spacebus]

2 things today...
Handles for my NOE mold because the Lee handles don't fit.
AND a Muzzle Brake for my vintage FWB 124 from our fellow member Spiral Groove.

What handles?

Theirs...
https://noebulletmolds.com/site/product-category/mould-handles/

They are nice handles.

[Insanity]

They are very well made well worth the cost.

[2A Georgia]

I would pass on the Monstrum the parallax is too far for lower power air guns

Maybe somebody will give me a Vortex 3X prismatic for father's day...lol
It will only cost as much as I have in Project 1322 by then and comes with a lifetime warranty.....
Amazon has the Primary Arms on sale for $189