So what did you Order / Receive today ? (to feed the "Beast" that lives within)

[kbstingwing]

ATN 4k Pro 3-14....

great scope, if you have any problems try doing a Factory reset, it fixes a lot of glitches.

[kbstingwing]

I got a tactical flashlight with remote switch and weaver ring from Tractor Supply. Won’t fit on anything I have without obstruction, but I plan to mount it on the DPMS A4 that I’m going to do the trigger job on. I’ll figure something out. I also got my pellet order from Trenier. Pleased with the packaging & shipping time wasn’t bad.

get one of these scope light mounts

[Jshooter71]

I got a tactical flashlight with remote switch and weaver ring from Tractor Supply. Won’t fit on anything I have without obstruction, but I plan to mount it on the DPMS A4 that I’m going to do the trigger job on. I’ll figure something out. I also got my pellet order from Trenier. Pleased with the packaging & shipping time wasn’t bad.

get one of these scope light mounts

Thanks Kevin, I forgot about that one.

[Scrambler82]

Got my order from Patch Worm for my Armada Bore Cleaning, think it will work for my .223's too !

The Rod is smaller diameter than I thought it would be but it works great.

The .22 Cleaning Patches were perfect fit, although I haven't tried the Ballistic Soaked Patches but I assume they will work good too !

I got an extra Rod to put in my Rifle Cleaning Kit for the .223 so I will try that one out soon but the results will be like the Airgun... very good tool !

Patch Worm's shipping was quick and the box well packed.

Thanks to the guy that make the video on U Tube about using this kit for cleaning his rifle and thanks to the guy on this site that posted his use of the kit !

[wolfnman]

Umarex Gauntlet .177 from PA for $180 plus four tins of pellets.

[Earl]

Umarex Gauntlet .177 from PA for $180 plus four tins of pellets.

Good buy wolfnman.
My .177 Gauntlet is most accurate with JSB 8.44 gr at 935 fps.
Have fun with it.

[wolfnman]

Umarex Gauntlet .177 from PA for $180 plus four tins of pellets.

Good buy wolfnman.
My .177 Gauntlet is most accurate with JSB 8.44 gr at 935 fps.
Have fun with it.

Thanks for the tip. JSB is still out of stock at PA so I got the Air Arms 8.44gr and FX 8gr pellets.  Wing JSB produced I'm hoping for similar results to the JSB branded 8.44gr.  I also got the Air Arms 10.34gr and the H&N FTT 8.64.

I of course have the whole selection of Crosman .177 from the wad cutters up to the 10gr domed with every head type design I'm between.

I intend to have much fun. ;-)

Thank you again!

[Ole Coyote]

My trigger parts from Daisy arrived today. Looking forward to making a couple of great guns, better!

[bReTt]

My trigger parts from Daisy arrived today. Looking forward to making a couple of great guns, better!

Trigger parts?  From Daisy?  What great guns are being improved?  853?  Do tell.  🙏

[Ole Coyote]

My trigger parts from Daisy arrived today. Looking forward to making a couple of great guns, better!

Trigger parts?  From Daisy?  What great guns are being improved?  853?  Do tell.  🙏

Yes, for my 2 CMP 853's. I bought two complete rebuild kits for the 888, they will convert the 853 to the Match trigger of the 888. They are drop in replacements that do the exact same thing as the Pilkguns mod. Basically it turns the 853 into a 753 in all but the sights. When I ordered the parts, I posted the entire parts list, earlier in this thread. All of the parts cost about $11.00 per gun.

[Oldgringo]

I have four (4) tins of 7.33 JSB Exacts on the way today from TRENIER OUTDOORS.

[Paulemar]

   Ordered a .22 caliber change kit for my .177 Crown. It's supposed to be the super light version and have the superior barrel liner. Got it from PA for $299 which I couldn't pass up. Seems to have saved me $100 on the kit and another $110 or so to upgrade to the superior liner from the standard stx barrel that used to come with the kits. I also remembered to order a mag to go with it. Eventually I'll order another Donny FL moderator so this barrel can have it's own & I don't have to swap moderators every time I change calibers.

Paul

[fatmatic]

I said I wouldn’t buy any more air guns and I saw the Evanix ar6k and had to have it. Mulled it over all night and caved in and ordered it today... I need help

[maraudinglizard]

I said I wouldn’t buy any more air guns and I saw the Evanix ar6k and had to have it. Mulled it over all night and caved in and ordered it today... I need help

Face it, you are doomed, there is no such thing as "I won't buy another one" when it comes to air guns. Congrat on your newest acquisition.

[Rat Sniper (AKA: PaulT58)]

UPS Delivered the AimSports Gen 2 DAR .22 today.  I shot 2 magazines through it and topped it off to 200 BAR.  It was already getting dark, so it will sit overnight to ensure there are no leaks.  So far it seems to be a great improvement over the Gen 1 as far as fit and finish.  I've not even cleaned the barrel yet, so it still needs to settle in before I start seeing how accurate it is.  Hopefully, it will be as accurate as the Gen 1! 

[bReTt]

My trigger parts from Daisy arrived today. Looking forward to making a couple of great guns, better!

Trigger parts?  From Daisy?  What great guns are being improved?  853?  Do tell.  🙏

Yes, for my 2 CMP 853's. I bought two complete rebuild kits for the 888, they will convert the 853 to the Match trigger of the 888. They are drop in replacements that do the exact same thing as the Pilkguns mod. Basically it turns the 853 into a 753 in all but the sights. When I ordered the parts, I posted the entire parts list, earlier in this thread. All of the parts cost about $11.00 per gun.

Thank you kindly!  I'm going to go back and look for the parts list. 

[bReTt]

Well, today is the day. I FINALLY got around to ordering the Trigger Upgrade parts for my Daisy/CMP M853"s. If anyone is interested here is the parts list:
888-6 (169633-K00) Hammer & Spring    $2.50
888-3   (154132-100) Trigger Housing  $3.50
888-5   (169764-K00) Trigger assembly $2.00
888-18 (169765-K00) Screw Assortment  $3.00
In case tou are wondering about the whyfores on some of these parts... The last 853 I upgraded had a groove worn in the hammer from 10's of thousands of shots fired, and on the two I am upgrading this time, some armorer who was all thumbs boogered up some of the screws. These parts upgrade the 853 to to the adjustable 888 match trigger, so the 853 essentially becomes a 753, in all but sights. I think the Screw Assortment also includes the Trigger Adjustment Screw, which you WILL need. This Mod is drop in replacement, no doctoring of parts required.

I found it!  Thanks again bro

[kbstingwing]

UPS Delivered the AimSports Gen 2 DAR .22 today.  I shot 2 magazines through it and topped it off to 200 BAR.  It was already getting dark, so it will sit overnight to ensure there are no leaks.  So far it seems to be a great improvement over the Gen 1 as far as fit and finish.  I've not even cleaned the barrel yet, so it still needs to settle in before I start seeing how accurate it is.  Hopefully, it will be as accurate as the Gen 1!

You're building up quite a Quiver there Paul, the Rats won't know which one got them...... 

[kbstingwing]

I ordered some FX Hybrid slugs in .22 and in .25 from Trenier, should be here tomorrow

[avator]

Got my DeadShot tripod sled. Looking forward to using it.