Author Topic: Discovery Custom Build (Read 4031 times))

honda191 · « **on:** February 09, 2015, 12:08:40 PM »

I have 2 Discoveries 1 is in real good shape I hunt and shoot it a lot love it!! The other my son put it away damp in a gun case and after some months I opened it up and found the steel was rusted and the stock was all mold actually etched into the wood. I decided since we do HydroGraphics Dipping at our shop to camo the stock and try to salvage it I just didn't quite like the finished look and the fact that the barrel and air tube were all pitted from the rust I then decided to do a full custom build and finish using the custom parts from BNM and some of the custom tricks we learned in the dipping.. Started out with a Black Carbon Fiber Dip finished with a Red Candy Paint and Clear Coat for the Stock and Air Tube. For the mechanical Mods I used the Chrome Finish Breach and Barrel Shroud From BNM... The Parts from BNM are amazing for Quality and totally made the Gun for looks and function I think it turned out pretty nice.. I'll post a few pics

honda191 · « **Reply #1 on:** February 09, 2015, 12:46:53 PM »

Here is the First Cammo Try not bad but Air Tube still all pitted

honda191 · « **Reply #2 on:** February 09, 2015, 12:54:02 PM »

Here is the New Look!!!

Bicycleman · « **Reply #3 on:** February 09, 2015, 12:55:10 PM »

I have thought about the vinyl wrapping for the stock on my Discovery .22. I would hope it would look as nice as yours does.

honda191 · « **Reply #4 on:** February 09, 2015, 12:56:29 PM »

Next to the standard

honda191 · « **Reply #5 on:** February 09, 2015, 12:59:42 PM »

Actually Hydrographics Water Transfer Printing we do this to some of our custom bikes we restore looks sometimes better than original especially in Camo or Carbon Fiber for the Frames...

honda191 · « **Reply #6 on:** February 09, 2015, 01:06:53 PM »

After Carbon Fiber Dip

honda191 · « **Reply #7 on:** February 09, 2015, 01:08:37 PM »

Finished Paint and Clear Before Assembly

UCChris · « **Reply #8 on:** February 09, 2015, 03:19:39 PM »

That is awesome!

Tater · « **Reply #9 on:** February 09, 2015, 05:34:55 PM »

That stock looks gorgeous. Nice job on that.

darrenf · « **Reply #10 on:** February 09, 2015, 07:04:29 PM »

Woah! That is sweet looking. Can you do mine next!!

cjk · « **Reply #11 on:** February 09, 2015, 08:48:00 PM »

You need to thank your son for that opportunity!

Looks really nice !

williesurvive · « **Reply #12 on:** February 09, 2015, 10:43:04 PM »

That is the nicest disco I've seen congrats

kj · « **Reply #13 on:** February 10, 2015, 04:09:49 AM »

sweet build.

kj

honda191 · « **Reply #14 on:** February 10, 2015, 08:19:03 AM »

This is the last pic of Final Completed Assembly finished last night..

Be Ready · « **Reply #15 on:** February 10, 2015, 09:03:38 AM »

Nice job on the disco !! Enjoy!!

Missed-Em · « **Reply #16 on:** February 12, 2015, 10:27:32 AM »

As they used to say "that is way awesome"! If your shop did this commercially how much would it cost?

dk1677 · « **Reply #17 on:** February 12, 2015, 10:40:51 AM »

Great work Ron!

honda191 · « **Reply #18 on:** February 14, 2015, 10:51:08 PM »

Cost would be around $200.00 less with no custom paint just pattern and clear coat..

Phire Phite · « **Reply #19 on:** February 15, 2015, 10:08:48 AM »

Looks amazing. Great restore. Not gonna lie though, I really like the first stock.

Thank you to our advertisers!

Discovery Custom Build

Author Topic: Discovery Custom Build (Read 4031 times))