Charging my vortex?

[Pappywith4]

Who here on this site would be willing to check and see how much my vortex piston has in it then bring it to 115 ?  I was told they were good to 150 but were shipped at 75! I would take it out of the rifle pkg it ship it and send reverse shipping and what ever else is needed !  I have a cf tank filled to 3k but no fill probe & din adapter with micro hose! I know I could buy one and I would if I were getting a pcp soon but I don't know how long that will be!   Thanks pappywith4.

[SpiralGroove]

Hey Pappy,
I can't fill the Vortex gas ram as you wanted, but it was my understanding they were filled to around 125 bar out of the box by Hatsan USA.  By law the UK is limited to 12 FPE, which may correspond to 75 bar?

My Hatsan 95 Vortex ram stated right on the unit "150 bar max, max muzzle velocity achieved at 125 bar".  Other members have said they have increased the ram's pressure up to 150 bar and experienced increased velocity vs. OEM, but with harsher shot cycle.

If you are getting close to Hatsan USA's OEM velocity then you're ram is likely at around 125 bar already.
Maxing out to 150 bar will give you more velocity, harsher shot cycle and probably wear out the gas ram sooner. 

Here is where you can buy just the fill probe from Hatsan USA
http://www.hatsanusa.com/parts/

You can buy the fill probe and then take it to any shop/range (using PCP's) that has a pump to adjust up to 150 bar.

I hope this helps.........

[Pappywith4]

Well I don't know how fast it is now but when I bought it Kenny said it was averaging 920 with 14.30 grn pellets!so too me that seems slower than posted!

[SpiralGroove]

Pappy,
It seems your gun's Vortex ram is filled to near 115/125 bar already.  From your prior posts you have put in a new ARH piston seal - right?  All things being equal you should be getting around 950 to 1000 fps.

Get the gun cronied before you doing anything else. 
I bet your local shooting range can do this for you.  After that I wouldn't go past 130 bar on the gun or just buy PCP.

My two cents..............

[Pappywith4]

Ok I will do that.   thanks friend,

[blackfocal]

if you end up wanting someone to fill it for you after testing it let me know I will take care of it for you.

[Pappywith4]

if you end up wanting someone to fill it for you after testing it let me know I will take care of it for you.

Thank you very much! I will look into seeing how fts it is!