Author Topic: XS60C PCP Repeater project (Read 455479 times))

rokitman60 · « **Reply #1120 on:** July 17, 2015, 08:44:12 PM »

Can't stop laughing...

crosman999 · « **Reply #1121 on:** July 17, 2015, 09:10:49 PM »

Very funny post,had to read a few times to get full effect! Lol I totally agree from a manufacturers standpoint field testing is worth it's weight in gold as to finding out just what can go wrong. Luckily this problem of loading mag backwards happen at the end of the day.That Slayer is proven in my mind to be one tough piece of engineering.

I think John is in love with it too!!

stalwart · « **Reply #1122 on:** July 17, 2015, 10:45:00 PM »

Quote from: rokitman60 on July 17, 2015, 08:44:12 PM

Can't stop laughing...

I had to share.

Quote from: crosman999 on July 17, 2015, 09:10:49 PM

I think John is in love with it too!!

Who wouldn't be? I've shown the mag around to my shop neighbors (PB guys), and sight unseen they all want the gun that goes under it.

He speaks very highly of it, and he knows a good tool when he sees one.

QVTom · « **Reply #1123 on:** July 18, 2015, 02:16:03 AM »

Jack and John

johninthecamper · « **Reply #1124 on:** July 18, 2015, 03:28:39 AM »

Quote from: QVTom on July 18, 2015, 02:16:03 AM

Jack and John

you can get real close to those guys and not even know they are there

stalwart · « **Reply #1125 on:** July 18, 2015, 09:42:20 AM »

Boy, no kidding! The first few times I looked at that pic, I didn't see any... and there is one very nearly at your throat!

I'm shaking, just thinking about what could have happened...

stalwart · « **Reply #1126 on:** July 18, 2015, 11:05:18 AM »

What are the OD choices in TJ's .357 liners?

rsterne · « **Reply #1127 on:** July 18, 2015, 01:37:58 PM »

1/2" and 5/8" to the best of my knowledge....

Bob

stalwart · « **Reply #1128 on:** July 18, 2015, 02:02:00 PM »

Sweet. 5/8" is perfect... take a hair off, going into the receiver, and it's done.

Thanks.

QVTom · « **Reply #1129 on:** July 18, 2015, 02:44:26 PM »

.500 and .590 for 357

rsterne · « **Reply #1130 on:** July 18, 2015, 04:01:56 PM »

Interesting.... I thought Mike's larger size tubing ended up 0.563" on a .25 cal, 0.590" on a .30 cal and 0.625" on a .357 cal.... I must have the wrong information.... I know you can also order special OD's, I think he centerless grinds them to size.... Of course if 0.590" is the largest he makes, that wouldn't apply here....

Bob

stalwart · « **Reply #1131 on:** July 19, 2015, 10:15:13 AM »

Either way, I'm the proverbial "Happy Camper".

Both ODs would let a bit of light between them and the tube... but not much else.

stalwart · « **Reply #1132 on:** July 19, 2015, 10:41:34 AM »

On the GRS, I'm considering making and stocking multiples of a standard piston "head" (actually a guide/stop), and MIG welding 3/16" drill blanks to them (quick custom lengths). If I choose very hard blanks for the quality polishing they would take, then allow that weld to cool slowly, wouldn't that make certain the hammering wouldn't fracture the rod?

http://www.mcmaster.com/#4347t37/=y4dhc0

stalwart · « **Reply #1133 on:** July 19, 2015, 02:52:56 PM »

Guys, I just got this email, from a domain registration company (they say):

"Dear CEO,

(If you are not the person who is in charge of this, please forward this to your CEO, because this is urgent, Thanks)

We are a Network Service Company which is the domain name registration center in Shanghai, China.
We received an application from Huayi Ltd on July 13, 2015. They want to register " stalwartarms " as their Internet Keyword and " stalwartarms .cn "、" stalwartarms .com.cn " 、" stalwartarms .net.cn "、" stalwartarms .org.cn " 、" stalwartarms .asia " domain names etc.., they are in China and Asia domain names. But after checking it, we find " stalwartarms " conflicts with your company. In order to deal with this matter better, so we send you email and confirm whether this company is your distributor or business partner in China or not?

Best Regards, ..."

What should I do?

QVTom · « **Reply #1134 on:** July 19, 2015, 03:07:50 PM »

Seems they want you .com domain or just more internet BS. You have 3 choices that come to mind. 1) Ignore it. 2) Buy up all the stalwart.X domains. 3) See if they are serious about buying your .com.

stalwart · « **Reply #1135 on:** July 19, 2015, 03:08:48 PM »

http://www.cnwebregistry.org.cn/ Seems legit. I told them I was not affiliated with Huayi Ltd, and they have no permission to use the name.

Hmmm... kind of resembles a situation that happened to someone here before (the name escapes me atm...LOL).

stalwart · « **Reply #1136 on:** July 19, 2015, 03:11:04 PM »

Quote from: QVTom on July 19, 2015, 03:07:50 PM

Seems they want you .com domain or just more internet BS. You have 3 choices that come to mind. 1) Ignore it. 2) Buy up all the stalwart.X domains. 3) See if they are serious about buying your .com.

I have had no offers to buy the domain...

I asked what I could do to prevent it's use... we'll see if they suggest I buy every permutation.

tominMPLS · « **Reply #1137 on:** July 19, 2015, 03:13:19 PM »

I think you just hit the jackpot! From what little I know about internet naming, if you have registered and purchased "Stalwart Arms.com" they cannot use it. You can of course sell them the name and that could be a large chunk of money.

I would get an attorney of internet law and discuss the matter, but I think you could make a good amount (if this is legit).

Wow! Best of luck, Eric!

Tom

WeeHeavy · « **Reply #1138 on:** July 19, 2015, 05:41:14 PM »

Quote from: stalwart on July 19, 2015, 02:52:56 PM

Guys, I just got this email, from a domain registration company (they say):

"Dear CEO,

(If you are not the person who is in charge of this, please forward this to your CEO, because this is urgent, Thanks)

We are a Network Service Company which is the domain name registration center in Shanghai, China.
We received an application from Huayi Ltd on July 13, 2015. They want to register " stalwartarms " as their Internet Keyword and " stalwartarms .cn "、" stalwartarms .com.cn " 、" stalwartarms .net.cn "、" stalwartarms .org.cn " 、" stalwartarms .asia " domain names etc.., they are in China and Asia domain names. But after checking it, we find " stalwartarms " conflicts with your company. In order to deal with this matter better, so we send you email and confirm whether this company is your distributor or business partner in China or not?

Best Regards, ..."

What should I do?

This is a well known scam and can be safely ignored. The truth is, if you respond in any way, you will be in for an ordeal. Ignore it, throw it away and forget about it. The prices they want to "protect" your branded domain name are stupid and they will do nothing if you send them money. Stay FAR FAR AWAY from this scam!
If your domain registrar has a way to hide your identity as the domain owner, you will not receive any of this BS. GoDaddy has this and most others do as well. Worth the $10 per year.

Here is an example:
http://squelchdesign.com/featured/chinese-domain-name-registration-scams/

stalwart · « **Reply #1139 on:** July 20, 2015, 08:33:25 AM »

Makes sense... my registrar keeps my name private, these guys contacted me through the address in my contact page.

I can't imagine anyone in China wanting to use a name as obscure and "un-sexy" as mine.

Thank you to our advertisers!

XS60C PCP Repeater project

Author Topic: XS60C PCP Repeater project (Read 455479 times))