swivel studs?

[boomer92266]

 I would like to put a sling on my airgun, I know that a stud goes in the stock but what do I use at the front? I don't think i  can use a stud with the cut out there, I was thinking a barrel band but I don't know. I have the sling and swivels, just need to know now how to attach it. thanks

[oneied]

I would like to put a sling on my airgun, I know that a stud goes in the stock but what do I use at the front? I don't think i  can use a stud with the cut out there, I was thinking a barrel band but I don't know. I have the sling and swivels, just need to know now how to attach it. thanks

What gun are you putting this on?

[boomer92266]

its a beeman wolverine 22 airgun, thanks.

[pyroboy33]

Here try this man :
https://www.pyramydair.com/product/gamo-gun-buddy-rifle-sling-fits-all-air-rifles?a=2227

It's supposed to fit all air rifles without the use of studs or swivels.

[Bullit]

Replace one of the front stock screws. This gets you into metal.  You may have to re-tap it if you can't match the thread..., but they aren't real hard or thick, so a sacrificial screw may do the trick for the job.  Check your length.  Attach with some blue loctite, and you should be good to go.

[boomer92266]

that looks like a shotgun sling that i have on my single barrel turkey gun, which front screws are you talking about Bullit? the only screws under the stock are at the trigger guard. thanks

[Bullit]

On the sides of the fore end of the stock, look for mounting screws for the synthetic stock.  Other than a type of a "barrel band", I Don't think you'll find a way to mount a stud on the bottom, like a traditional powder burner.