Who has brass trigger guards for discos to use with mrod trigger?

[fivestar45]

No clue what went wrong with photobucket..or me
[/img]
[/img]

[1377x]

No clue what went wrong with photobucket..or me
[/img]
[/img]

you have to many img's
when using the img code from photobucket you dont need to use the one here

[Sqrl Klr]

Are they set to private in your pb account by chance? You can also try instantly uploading your pics to this free site as it doesn't require an account and it doesn't restrict your picture size like pb does either. http://www.imgnook.com/

Click on "Select your image" then hold the Ctrl button and mouse click on all pictures you want to upload together at once so it will choose them all. Then after uploading is completed select the "Original Image" menu under each pic listed then you will see a "Message Boards" option with the {img} codes already added to the pic url by imgnook. Copy the url listing that way for each pic and paste it here.

Easy!

Nice shine on that stock five! Thanks for posting them Ed.

[fivestar45]

Last try for a complete re-do of Text and Pic's
Here are a few pic's of the OEM M'rod trigger guard that I modified, and how I did the trigger installation on my 2260 stocked Disco Carbine. Basically I fastened the guard to two delrin stand offs that were attached by tapping two holes in the trigger group. The front hole is already there from Crosman it just had to be tapped. The rear hole needed to be drilled, and then tapped.
Also, you'll notice one of Tim's custom St/St trigger blades and the adjustment hole I mentioned previously.
[IMG]

[fivestar45]

THANKS to all who put up with my inept pic posting capabilities, and the folks trying to help me get it right. I think the size of the originals in PB was too large at the start. I HOPE, in the future I can keep it right.

[1377x]

you'll notice one of Tim's custom St/St trigger blades and the adjustment hole I mentioned previously.

who is tim?
did i miss it earlier in the thread?

[Sqrl Klr]

45, would you be able to make me a couple of those delrin adapters for my mrod guard? If so I could paypal you for it.

[fivestar45]

As for "Who's Tim" he's the man that makes the trigger's and trigger guards. I know I'm going to screw up his name, Tim Eink.. I provided his contact info in an earlier post.

The delrin stand off's that I used on my project were measured up after the trigger group was installed. If you can provide me with the dimensions you need to complete your installation, I can make them. The stock plays a large part in the length of these.

[Sqrl Klr]

45 I'm sending you a pm.

[1377x]

As for "Who's Tim" he's the man that makes the trigger's and trigger guards. I know I'm going to screw up his name, Tim Eink.. I provided his contact info in an earlier post.

The delrin stand off's that I used on my project were measured up after the trigger group was installed. If you can provide me with the dimensions you need to complete your installation, I can make them. The stock plays a large part in the length of these.

thanks i guess its best to read front to back insread of vise-versa
went back and caaught the thread from the beginning