Author Topic: LDC for Benajamin 392 and 397, Interested? (Read 16756 times))

Crosshairs · « **Reply #1 on:** March 05, 2012, 10:44:16 AM »

Sounds like a good idea Brian i would like to see that happen.
Mike

Nathan · « **Reply #2 on:** March 05, 2012, 02:16:58 PM »

"Build it and they shall come"
If you can come up with a good design to mount it on the rifle and still allow the use of the iron sights, you may have a real winner. There are a lot of 392/397 guns out there, so an effective LDC might appeal to more buyers than you think. If you could keep the cost reasonable, I believe they'd sell very well.

Nathan

run and gun · « **Reply #3 on:** March 05, 2012, 03:02:19 PM »

count me in.

1377x · « **Reply #4 on:** March 05, 2012, 04:02:39 PM »

if you are in the USA youre playing with fire using a threaded device
all it takes is a mis-informed passer-by to cause you problems
there is thread somewhere about a soldered on barrel extention that lends itself to a set screw ldc

MustangMike · « **Reply #5 on:** March 05, 2012, 04:20:25 PM »

Just an idea, if you were to create the mount for it I'm sure mike over at tko could work something up to mount on ur mount

SAADE · « **Reply #6 on:** March 05, 2012, 05:31:18 PM »

aack73 · « **Reply #7 on:** March 05, 2012, 05:33:42 PM »

i would be interested if it's a good solid design. fit/finish/functionality/price.

.177 and .20

Scratch · « **Reply #8 on:** March 05, 2012, 05:38:51 PM »

Have plans for a Mac 1, so....a possible.

MustangMike · « **Reply #9 on:** March 05, 2012, 05:38:56 PM »

design a prototype and send it to mike over at tko and see what he can work with.. or send him a design and maybe he can make a 392/397 tko kit and give you a % of the profits from it..

i sure miss my 392, that thing was a tack driver but it was loud.. esp when i super glued the caps from those ring caps for cap guns to the head of pellets.. lol fun thing to do at night is shoot pelelts with caps glued to them at plywood.

Wheelman88 · « **Reply #10 on:** March 05, 2012, 07:43:52 PM »

I'm interested.

Petey · « **Reply #11 on:** March 05, 2012, 08:08:45 PM »

I'm In !

VAFarmer · « **Reply #12 on:** March 05, 2012, 08:30:19 PM »

I have had a couple ideas about this, glad someone else is going this route.....

Must not be very easy to do, or we would have seen something about it before....

Good luck, and God bless,

Farmer

slothart · « **Reply #13 on:** March 05, 2012, 08:46:05 PM »

You might consider posting this to TKO Mike's technical forum:
http://www.network54.com/Forum/678247/

BenjiHunter · « **Reply #14 on:** March 05, 2012, 09:06:50 PM »

I have an idea of my own, but if that doesn't work out I'll be interested.

goodland · « **Reply #15 on:** March 06, 2012, 12:49:25 AM »

Yes I would buy one and would give me a good reason to get a benji pumper.
That would open the door for me as it has always been the sticking point.
the tamer the better

Thanks Dave

1377x · « **Reply #16 on:** March 06, 2012, 02:04:55 AM »

Quote from: SAADE on March 05, 2012, 05:31:18 PM

Quote from: mustangmike on March 05, 2012, 04:20:25 PM
Just an idea, if you were to create the mount for it I'm sure mike over at tko could work something up to mount on ur mount

Exactly Mike, I was thinking the barrel "extension" part of the device could be 7/16" O.D. like the 2240s and the slip fit for TKOs would be perfect?

1377x: Not "playing" with anything, wish we could keep the incendiary comments out of it.

i dont care what you are playing with
there has been problems caused in the past.just stating a fact.take it as you want to

badredbird · « **Reply #17 on:** March 06, 2012, 07:09:36 AM »

id surely buy one for each gun 6 of them

SAADE · « **Reply #18 on:** March 06, 2012, 11:16:28 AM »

airgun4rhire · « **Reply #19 on:** March 06, 2012, 02:25:10 PM »

I would like one if they become available.

Thank you to our advertisers!

LDC for Benajamin 392 and 397, Interested?

Author Topic: LDC for Benajamin 392 and 397, Interested? (Read 16756 times))

run and gun

Scratch

airgun4rhire