Diana 34 P coking issue after a Vortek install

[noronha]

Good evening guys!!
thank you for all the answers... I managed to make the Kit work!! :^D

The trigger assembly was stuck some how in a wrong position. After I removed and put it back several times I figured out the it needs to be able to spin around the gun axis kind freelly, even under the pressure of the spring.

If this is checked the kit works smoothly as promissed. In the weekend I will make some pellets fly and post my impressions!!!

Again thank you to all for the answers!!

[TOM aka critter99]

Slave pins keep all that stuff aligned during a teardown.   make some up for next time

[WHITEFANG]

On the kits it tells you if you have an issue that develops of any bind in the install to stop. Then rotate the assemble of the spring. Did you fell and unforgiving Resistance on the Assembly. If not this looks like something was not aligned on the assembly. On the 350's it's just a drop in. LIKE a plug and PLAY. Nothing to align. Trigger just drops in behind the spring. At least the TO5. Glad you up and slinging.

THE FANG